What s going on with my computer configuration to play CF graphics cards?

The graphics card is bad enough, it's not a card for playing games, and the CPU isn't strong enough.

There's also your network, if you're adsl, there are a lot of people definitely carding, and then the configuration goes up, or you are stuck!

My friend's computer configuration is at least about 2 years worse than mine, that is, he uses GF8600, I use GF9800, but his home is upstairs in the telecom room, and he is hundreds of times smoother than me!

No need to change! See if your network is laggy! Check it with some software, and if it's normal, just reinstall the system! If you want to change the configuration, you can just change the CPU, and you can change to AMD X2 245 level!

Your configuration is too bad, I suggest you reinstall a group!

I introduce the following;

cpu;AMD Athlon™ II X2 250

Mainboard; Onda A770S + Magic Flute Edition Onda A770S RAM 2GDDR800 285

Hard disk; Western Digital 1TB 64M Green Disk.

Graphics; Onda 9600GT

Chassis Power Train Dustless T01

Power supply; Great Wall Silent Master 400SD

Display: Samsung 19 LCD.

Optical drive Samsung***16x

Keyboard and mouse ; Double Delphinium X-710K Double Delphinium.

Really easy to use!

Hope it helps!

CF has relatively high CPU requirements.

But your configuration is more than enough to play cf Don't listen to the blowing upstairs What configuration is not enough.

Try to drive and reinstall or reinstall the system.

There is no need for such a good configuration to play CF, the general is good, look at how your home network speed is, your computer is good, the main thing is the network speed.

The graphics card can't keep up, so it's better to change to a graphics card.

-I have less CPU memory and graphics card than you, and I can still run 3D games.

Do you reinstall the system and try to get stuck?

Don't change anything.,Try driving slowly.,This configuration doesn't get stuck like this when you play cf.。

Yours mainly has a bit of a poor graphics card.

I rely on (o) convex Your computer configuration is 2 times better than mine, and I play 3D games.

You can't play Have you ever maintained a computer?

It's good to go and maintain some software yourself.

Yo, it's not bad, maybe it's a network speed problem.

1.The graphics card is too old, and the performance of the graphics card cannot support CF or cannot be perfectly supported, only a good graphics card can be replaced.

2.The graphics card driver is not installed, or it is not compatible with the local graphics card, and you can replace it with a compatible one after uninstalling it3There is a virus in the computer, which occupies a lot of CPU or memory, and the hard disk is destroyed or formatted4

There is too much dust in the case, causing the graphics card or CPU to not be able to dissipate heat in time, just clean up the inside of the case.

5.The higher the ping, the slower the network speed, and you can see it by pressing the tab key in the game. If it's too high, change to a good network card or a good network, such as telecommunications. If your home network cable is telecom, the Internet communication server will also be stuck.

Hello, please try this method, thank you!

NVIDIA graphics card.

1Enter the NVIDIA graphics card settings interface, click to enter the "Performance and Quality Settings" interface on the left, select "V-Sync", and remove the checkmark before "Application Control". Then set the slider to "off", which breaks the game's limit of only 60 fps. However, the refresh rate of the monitor will be reduced in the game.

The next step is required. By the way, if your graphics card is a bottom-end product, such as gfx2mx440, you can also turn off several other functions, which can improve the efficiency of the graphics card, except for "system performance".

2Click "Refresh Rate Overclocking" on the left to enter the "Refresh Rate Overclocking" interface. Click Use "Specified Refresh Rate", then select the resolution you are using in the list below, click on the refresh rate in it, and a drop-down list will appear, select the refresh rate of the monitor you want to use. Such as:

The CS resolution is 800, and the refresh rate of the display can be changed to 100, and the general display can use 100Hz at this resolution.

After these two steps, you can see that the game's fps is at 100 (provided that the maximum fps value is changed to 100 in the game cfg file, and your graphics card is not too bad.)

In addition, let's talk about how to increase the brightness of the game. Some people use the method of changing the game CFG file to increase the brightness of the game, this method has many drawbacks, such as: the color of the picture looks very incongruous, the place blown up by the grenade will be darkened, and so on.

In fact, it can be set in the graphics card. Here's how.

Go to the NVIDIA graphics card settings screen and click "Color Correction" on the left. The "brightness" is generally adjusted, and then the "grayscale" is adjusted or, and the specific value can be adjusted by yourself. Note that the "contrast" is not changed.

The brightness of the game has been significantly improved, and standing on Avenue A of DUST2, you can clearly see whether there is anyone in the dark place in the corner of the box in the CT birthplace, haha, see how the ** person dies in the future! And the color of the picture is natural. Current!