How can a computer use WLAN services?

WLAN is a wireless service, and the computer needs to be equipped with a wireless network card.

Laptops generally have built-in wireless network cards, and desktops are recommended to purchase external network cards to connect to them.

You can log in to our WLAN service on your computer or mobile phone pad in the following ways:

Turn on the WiFi function in the PDA of the computer or mobile phone, or insert the WiFi network card;

Connect to the signal network, select "chinaunicom" in the Wi-Fi connection list, and click Connect;

After connecting to the WLAN network, open the browser and enter a ** casually, press Enter, if the system configuration is correct, it will lead to the WLAN login interface;

After the login page is displayed, enter the account password and verification code, after the login is successful, please do not close this page (closing this page means disconnecting from the network), open another browser page to access the Internet.

If you have any questions, you can contact your local customer service for consultation. The policies vary from place to place, and the specific place of ownership shall prevail.

Computers with a wireless network card can be used in the Wi-Fi coverage area.

Generally, laptops come with their own wireless network cards, and desktops can also use which external wireless network cards!

Hello, your computer needs to support wireless connection function, if it supports wireless connection function, then directly turn on the wifi network, and then connect the WLAN signal, open the browser after connecting and log in to use the WLAN network. For more service discounts, please pay attention to "Anhui Telecom"***.

Here are the possible workarounds:

Check if your computer's Wi-Fi switch is off: Some computers have a physical switch or keyboard shortcut to control the Wi-Fi switch. Make sure that this opening meditation is not turned off and is open.

Check Device Manager: Check the network adapter in Device Manager, make sure the WLAN adapter is enabled, and if not, enable it.

Check Network Settings: Check the Network and Sharing Center in the Differential Tolerance panel to make sure that WLAN is enabled and not disabled.

Check WLAN Service: Check whether the WLAN AutoConfig service is started in the service. If it is not started, right-click the service and select Start Raid.

1. China Telecom was the first to propose WLAN services. If you use the wifi of your mobile phone or the wireless network card of your laptop to search for "chinanet" at the train station and bus station, such a hotspot is generally a WLAN hotspot. At present, China Telecom, China Mobile, and China Unicom all have WLAN Internet access services.

WLAN Internet access service can be understood as Internet access in the form of wireless LAN similar to our home. The simple difference is that all devices in the home wireless network are connected through the same password, while the operator's WLAN is that each device has a separate account and password.

Telecom WLAN is a wireless hotspot set up by Telecom in some public areas (such as bus stations, railway stations, coffee shops, hotels, fast food restaurants), and your mobile phone can connect to the Internet through the WLAN account (usually your mobile phone number) and password (generally can be obtained by SMS).

In most cases, the speed is better than that of 2G or 3G Internet, and the stability is also better. In addition, WLAN Internet access does not limit the traffic and is billed by hour.

For the device, as long as the mobile phone supports wifi, the laptop has a wireless network card (generally has), and you can use your mobile phone number and password to connect to the hotspot.

A notebook is also possible for a cell! The key is whether the place you use has your corresponding mobile phone operator's WLAN hotspot, your mobile phone or computer wifi can search for such a hotspot and you can enter the number and password to use!!

If you can't find it on the computer, you probably don't have it nearby! ~！I don't know about N91's mobile phone, but if it supports WiFi, it can be used!!

But it is estimated that it is not searchable!! But I always carry my phone with me, ......If you're in a more formal place, you can try it, like the ones listed upstairs, maybe there are, then you can use it!! The internet speed will be relatively fast!!

If you can't find the hotspot, you can't use it, you can go to the telecom to check if there is a wifi hotspot in your community.

You can use China Unicom's WLAN service through a mobile browser, and to register for the free WLAN friendly experience, please send "tyWLAN" to 10010 to apply, and the initial login password will be sent to you via SMS. The specific steps are as follows:

Step 1: You first find a wireless outlet with a ChinaUnicom signal;

Step 2: Turn on the wifi function in your phone;

Step 3: Open the network connection in the mobile phone browser, double-click "Wi-Fi connection", search for Wi-Fi connection, select "chinaunicom" in the Wi-Fi connection list, and click Connect; The user successfully connects to the CHINAUNICOM wireless access point and obtains the address;

Step 5: You can enter your mobile phone number and verification code when you log in for the first time, and click Login Password Acquisition to get the Internet account and password in the form of SMS.

Registered users: You can log in with your existing account and password. If the password is incorrect, you can enter the mobile phone number and verification code, and click Login Password to get a new password.

Step 6: Enter your mobile phone number, login password and other information in the authentication page pushed by the browser and submit;

Step 7: Once you have successfully logged in, you will be able to browse the web normally. Please keep the browser interface you used to log in. If you want to browse the web, you can open a separate browser window.

Step 8: To go offline, click on the "Disconnect" button on the landing page.