What should I do if the system disk does not have the system restore function?

You can't have a system CD, you just haven't found it.

After setting the BIOS settings of the computer to the "CD boot" option, the computer boots from the CD, and on the interface where the CD window appears, the first option is usually called "Auto restore the system to the C drive", so the second and third items. All the time, there is a system called "manual restore", which is the manual way to restore.

The reason why the landlord can't find the restoration,I believe most of it is because the computer is not set from the BIOS First Boot Priority Device:"Boot from CD",Just simply double-click in the Windows interface and get it into the CD disc。

Control Panel--- System --- System Restore--- remove the "Turn off restore on all drives" checkmark, and then select the disk you want to restore point, generally select C drive; It is not recommended to make a restore point for other disks, otherwise your data file will be overwritten or disappeared after you restore.

Install a one-click ghost, easy backup, when you feel that the computer system is not happy to use, one-click restore to just installed.

After installing the system, you must select the second item of the startup item after restarting, which is the system backup, and the system that has been backed up will be restored.

Back up files on other hard drives, repartition them, format them, and then reinstall the system, or replace them with a new system disk.

It's supposed to be a system problem.,Try a different system.,Elimination.,But win10 is really not good.,Frequent updates.,Don't use it if you can.。

The web link is referred to the installation tutorial.

At that time, the bright moon was there, and it was back from the clouds.

When to sit on the system? What system? w win 10.Or XP

If the TV fails, you should generally find the manufacturer's after-sales service.

Even if the warranty period is exceeded, it is still necessary to find the manufacturer's maintenance personnel.

Because a TV is not the same as a computer, there is very little space for users to do it themselves.

Isn't it supposed to be in the settings? You said a factory reset.

Pay attention to your disk 4, which is a hard disk with a capacity of 4t. The partition table crashed, this is not just a casual installation of the system can be recovered, if the data is important, take this hard disk to the computer city to find a professional data recovery master to recover, if not important, you can use it if you re-establish the partition yourself.

However, it is important to note that after repartitioning, you will never be able to retrieve the previous data, so please consider it carefully!!

You can only see and manage the device driver in the device manager, you can see in the device manager that this mobile disk is just the driver running, but it is still the same as before, there is no partition, in my computer you can only see the disk with partition changes such as [local disk c, local disk d, etc.]. This 4T hard disk is a partition table crash, you change to a mobile disk box or a different computer to install the same effect, you can't view the data inside. It's like reverting this disk to a new disk.

The processing method is still the 2 mentioned above: If you want to use it, you can only create a new partition table, but the data is no longer [this is the fastest and most trouble-free].

If you want to keep the data, go to the computer city or the after-sales maintenance points of major computer brands to find someone to recover the data [this method can retrieve the previous data, but the time has to be about 4 to 7 days, after all, it is hundreds of gigabytes of data].

Be careful not to find someone on the Internet to send it to repair by email, the transportation process is easy to cause damage to the disk**, and it is easy to encounter the repair back but you are implanted with viruses and spend money repeatedly!!

My Computer Settings Advanced Settings Disk Drive is displayed up.

What is the reason for the restore failure during system restore?

Loss of restore points and Windows

The System Restore feature is turned off.

Some friends may mistakenly think that I only need to create a restore point at a certain time, then I can turn off the system restore function, so that I don't have to create restore points all the time and save hard drive space. But if we shut down Windows manually

XP's system restore function, then all your previously created restore points will be deleted, so you won't find any restore points. If you want to use the System Restore feature, you can't turn it off.

The partition space is insufficient.

When many friends install software, they always install it in the default path, which often makes the system partition take up a lot of space. Because of this, it will lead to Windows as well

XP's system restore function stops working and stops monitoring the system, at which point the system will delete all restore points to free up partition space, and no restore points will be found. Even if the partition is not enough to stop the "restore" function, the system will delete some of the previous restore points to free up space, and we will find that some restore points cannot be found. Therefore, when we install the software, we should not always follow the default path to install, and make sure that the system partition has enough hard disk space for the restore function.

When we get a warning that we are running out of disk space, we need to be prepared to free up partition space.

Use the Disk Cleanup program with caution.

We usually use Windows

When XP "Disk Cleanup" program to clean up useless data from hard drive, be careful not to use the "Cleanup" feature in "System Restore" under "Other Options" tab. If you use this feature, all restore points will be deleted.

If not, it's usually a reinstall system.

Or you can restore it if you have a backup of your system.

You can restore through the built-in system backup, provided that you have backed up before, or you can quickly reinstall the system through orange one-click reinstallation, and then use it to make a system backup, and you can restore it directly when you encounter a computer crash in the future.

You can refer to the tutorial to reinstall the system, and the way is relatively simple.

In fact, it is very simple to reinstall the system, without the help of a CD or U disk, simple and fast--- you can install the XP system or Win7 operating system on the hard disk of the computer.

1.Computer CPU Pentium 4 or above, memory: between 1GB-3GB, it is recommended to choose Windows 7-32bit.

2.The computer configuration meets the requirements of more than dual-core CPU (as long as it meets the dual-core requirements) and at least 4GB or more than 4GB of memory, it is recommended to choose the system of win7-64-bit flagship version!

Use your computer's hard disk to install the system, and the specific operation is as follows:

3.Open the unzipped folder, double-click "Hard Disk Installer", and in the window that opens, click "Install".Can.

4.In the window that appears, the ghost image file path will be automatically added, select the partition that needs to be restored to, the default is the C drive, and click the "OK" button to install it automatically.

win7 or 8 how to restore the system (there is a premise, if your computer crashes, blue screen, can't turn on, the restoration method is basically invalid, then you need to reinstall).

If you have turned on the restore of the system, if you have backed up the image backup, if you have restored the software software, if you have pre-installed the genuine system, if you do not have it at all, you can not restore the system after reinstalling it and making the above preparations, and you can restore it next time something happens.

1) Right-click on the computer to select the attributes, select the system protection on the left, select the disk to be protected in the protection settings, click on the above to restore the system settings and the previous version of the file, press OK in the size of the selected disk usage, set up a few disks to protect a few disks, and set it according to the above method. In this way, the system will automatically back up, or you can manually back up, select Create at the bottom of this page, and create the restore point yourself. The restore method is:

Win7 or 8 restore the system, right-click on the computer to select attributes, select system protection on the right side, system restoration, and follow the steps to do it.

2) Win7 system can also use the backup image function, open the control panel System and Security Backup and Restore Select Create System Image on the left side and do it according to the steps and requirements (the method of restoration is to enter the safe mode and select the repair system to select the image backup and restore it step by step).

Win8 Create Image Method: Open the control panel, select Save a backup copy of your file through file history in System and Security, wait in the lower left corner of the open page, it will display Win7 file recovery, select Create a system image, do it as required (the lower left is not Win7 file recovery, but create a system image).

3) If you use software to prepare the system:

4) Pre-installed genuine system restoration method: (win7 home version win810 Chinese version is genuine, 99% of the system above the professional version is pirated).

It is recommended to consult the brand's customer service and tell you the method, because the brand is different, and the method is different.

5) Heng Li Wang, if you are talking about reinstalling the system, you will not install it, it is recommended to spend 30 yuan to repair the computer ** installation, if you have any questions, please ask me.

How can you have it without pretending?