Go kart installation, go kart homemade tutorial video

1. Open the lid of the tin box and drill four symmetrical holes on the side of the tin box with an electric drill or other tools.

2. Use an electric drill to drill holes in the middle of the cap of the mineral water bottle as the four wheels of the DIY go-kart.

3. Connect the wheels with bamboo skewers, glue them firmly with a hot melt glue gun, and then pass the bamboo skewers through the drilled holes on the iron box to install the wheels.

4. Cut out the cardboard and stick it in the parking space as a tail wing and jet cylinder.

5. After the installation is completed, a simple go-kart is completed.

The most important thing is your suspension system, it is recommended that you use a four-wheel independent suspension system, and the shock absorption is recommended that you use the shock absorption of the motorcycle, which has shock absorption oil to slow the roughness, and the effect will be ideal. If you are fast enough, you must use the steering wheel, otherwise you will be prone to accidents.

You definitely don't have the data of the front wheel caster, roll angle, toe, I can provide you, these data are necessary, otherwise the car can't drive, either turn left or right, and you can't return to the right after hitting the direction. The brake should be abs disc brake, ** sold, very cheap, this money can not be saved, for safety. Many electric vehicle motors are reversed, both rear wheels should be installed with motors, single motor with differential is not good, disc brake is difficult to install, transmission efficiency is low, punching noise is also large.

The motor is recommended to use 60V, 48V is too slow, and there is no feeling you want. The capacity of the battery should be larger, at least 30ah, otherwise it will be easy to break, and the trip will be very short. The advantage of dual motors is that when one of them is damaged, the other can continue to walk.

You're going to use roller skates to remodel a "spare tire", and when the tire breaks, put it under the wheels and at least guarantee home.

Ah, friend, although I'm not a master, but in terms of my personal experience, I can still say a few personal opinions, maybe a little crude, and I hope don't dislike it!

I think that the first thing to do is to be familiar with the performance of the car, which is the so-called feel, which I think as long as my friends run a few more times. Secondly, I think that in order to run karting well, some basic skills are also needed, such as point drifting, link spraying, continuous spraying, double spraying, ranking, optimization, etc., which are very slippery and practical, and it is very important to really change the core after practice. Again, I think it is also very helpful to choose a good car that suits you to improve your skills, after all, one of the protagonists of go-karts is the car.

Finally, I suggest that friends can consider joining a better team, because if you have good teammates who often compete with you, you will definitely benefit a lot, and you will improve quickly and run faster and faster.

Although this is just my personal opinion, I hope it will be helpful to my friends.

Have fun with friends :-)

All of its materials can be found on the Internet! Some of its materials are not particularly expensive! I have a friend who assembled one himself! Its main engines are all professionally specified! It's just expensive.