Epson printer can t print after adding ink? 50

The previous ink dried, blocking the inkjet part.

After sending the print bai command, the printer can feed the paper normally and the printing action is normal, at this time, the blank page or white horizontal stripe is printed, which is caused by the blockage of the dao nozzle, please refer to the following solutions:

1.If you are installing a newly purchased ink cartridge, you can see a yellow adhesive strip on the ink cartridge when you open the inner and outer packaging, and you must remove this seal before replacing the ink cartridge before installing it on the printer.

2.Follow the method below for nozzle inspection:

1) Turn on the printer and load A4 paper in the printer feeder;

For Windows

98 me users).

Select "Start" - > Settings - > Printer", right-click the printer icon, and select "Properties" - >Maintenance".

or "Utilities";

For Windows

2000 XP Vista 7 users).

Select Start - Control Panel - Devices and Printers or Printers & Fax

Right-click on the printer icon and select "Printing Preferences" - "Maintenance".

or "Utilities";

3) Select. Nozzle check", select "Print" according to the on-screen prompt, and the printer will print out the nozzle check sample;

4) If the printed nozzle inspection pattern is missing color or broken line, please select the "Print Head Cleaning" button;

5) It is recommended to leave the print head for 24 hours to fully soak the ink into the print head and then do a nozzle check to avoid wasting the ink;

Summary. Hello, dear, I am glad to answer for you: why can't the Epson printer print after adding ink can be solved by troubleshooting with the following steps:

1. If the newly purchased ink cartridge is installed, after opening the inner and outer packaging, you can see a yellow adhesive strip on the ink cartridge, before replacing the ink cartridge, you need to remove this seal and then install it on the printer; 2. Turn on the power of the printer, load the A4 paper in the printer feeder, select "Start", "Settings", "Printer", right-click the printer icon, and select "Properties", "Maintenance" or "Application Tools". 3. If the printed nozzle inspection pattern is missing or broken, select the "Print Head Cleaning" button; 4. If cleaning the print head 3 times on the same day is still ineffective, it is recommended to leave it for 24 hours to make the ink fully soak the print head, and then do a nozzle inspection to avoid wasting ink; 5. After leaving it for 24 hours, clean the print head for 2 more times, if it is still invalid, you need to contact the Epson authorized service center to professionally clean the printer.

Why can't the Epson printer print after adding ink?

Hurry up. Hello, dear, I am glad to answer for you: why can't the Epson printer print after adding ink can be solved by troubleshooting with the following steps:

1. If the newly purchased ink cartridge is installed, after opening the inner and outer packaging, you can see a yellow adhesive strip on the ink cartridge, before replacing the ink cartridge, you need to remove this seal and then install it on the printer; 2. Turn on the power of the printer, load the A4 paper in the printer feeder, select "Start", "Settings", "Printer", right-click the printer icon, and select "Properties", "Maintenance" or "Application Tools". 3. If the printed nozzle inspection pattern is missing or broken, select the "Print Head Cleaning" button; 4. If cleaning the print head 3 times on the same day is still ineffective, it is recommended to leave it for 24 hours to make the ink fully soak the print head, and then do a nozzle inspection to avoid wasting ink; 5. After leaving it for 24 hours, clean the print head for 2 more times, if it is still invalid, you need to contact the Epson authorized service center to professionally clean the printer.

A printer is one of the output devices of a computer, which is used to print the results of computer processing on related media. There are three indicators to measure the quality of a printer: print resolution, print speed, and noise.

There are many types of printers, according to whether the printing element hits the paper, it is divided into impact printers and non-impact printers. According to the structure of printed characters, it is divided into full-character printers and dot matrix character printers. According to the way that a line of words is formed on paper, it is divided into serial printers and line printers.

According to the technology adopted, it is divided into cylindrical, spherical, inkjet, thermal, laser, electrostatic, magnetic, light-emitting diode and other printers.

1. Causes: 1. Caused by the exhaustion of ink cartridges. However, most of the reasons are caused by clogged sprinklers.

2. Slight blockage can be basically solved by cleaning it with the printer's own nozzle. In the case of severe blockage, the HP type can replace the ink cartridge, while the EP type can only try to dredge the print printhead.

3. The reason for printing color bias is due to the lack of a certain color in the printer, or several colors, and the angle of the print head is not calibrated, which will also cause local color cast. Paper.

and the unconformity of the cartridge, which can also cause such failures.

Second, the treatment method:

1. The original picture on the new monitor, so that the printer can make the desired color of the graph;

2. There is no counting chip on the ink cartridge of this model printer, take out the ink cartridge and then load it during use, the printer will default to install a new ink cartridge, and the ink capacity can not be measured correctly. See if there is ink in the cartridge. If it is a continuous supply to see if the pores are normal, some even supply and demand need to open the pores so that the ink can circulate normally.

Clean the print head normally. If it doesn't print at all, and the printer has been idle for a long time. Then it may be that the nozzle is blocked, and if you can still print some, you can continue to clean.

If it really doesn't work, you can also remove the print head, soak the print head, and generally soak it for 72 hours and then reinstall it. If it doesn't work, it means that you can't solve it, send it for repair or replacement.

There are many reasons for this situation, and it is necessary to find the cause and then adjust the symptoms. If you can't adjust it in this case, it's best to ask after sales and get help.

Epson printer troubleshooting method.

1. Fault 1.

Fault Symptom: The ink light is on, and the power supply flashes, which only indicates that the ink has run out, but does not indicate that the ink cartridge is recognized.

Solution: We only need to click the key to replace the ink to replace it, and generally operate according to the prompts that appear on the printer.

Second, fault two.

Fault phenomenon: The ink lamp feeds the paper light together, but the ink lamp flashes at a relatively fast frequency.

Solution: We can directly try to check the tray of the CD to see if it is closed.

Three, fault three.

Fault phenomenon: Generally, after the printer is turned on, the ink car will not move, and nothing will be printed at this time, but the paper and ink lights are flashing.

Solution: We only need to add a little lubricating oil to the steel shaft to see if there is a paper jam.

Fourth, fault four.

Fault Symptom: Epson R210, R230 feed and ink lamps flash at the same time.

Solution: First of all, let's take a look at the printer's paper measuring sensor, check whether its pipeline length is appropriate, and adjust the length of the pipeline to see whether the pipeline length is appropriate when we see the left and right sides.

Five, fault five.

Fault Symptom: The printer's paper feed light and ink light are flashing alternately.

Solution: We just need to do our best to scrap the ink and clean up the software.

Sixth, fault six.

Fault Symptom: The attribute of the driver is the grayscale state of the ink output, and it is normal for a while and abnormal for a while.

Solution: We can directly change an ink cartridge, or check the contact of the data cable to see if there is a problem, if it appears, directly change the data cable.

If the printer does not produce ink, it means that the printer's printhead is clogged, in this case, you need to find the maintenance function in the printer's preferences. Then click on the Wash Printhead function. After cleaning, make a nozzle test page to see the effect. If the effect is not good, then clean.

There are many reasons why Epson prints blank without ink, it may be that the ink cartridge is exhausted and the ink cartridge needs to be replaced; It may be that the print head is damaged and needs to contact the after-sales service; It may be that the print settings are incorrect, such as setting up blank page printing; It may be that the printer hardware is faulty and needs to be serviced.

Hello, there may be two situations when the Epson printer does not produce ink:

1. There is no ink, and ink needs to be added;

2. The print head is clogged and needs to be cleaned.

In general, the print head is clogged.