Subject 2 car training to look at, what to refer to, where to watch

Updated on Car 2024-02-09
12 answers
  1. Anonymous users2024-02-05

    The speed limit passes through the width limit door, and its test requirements are: continuous crossing from 3 doors, the speed is not less than 10 kilometers per hour, and the door suspension rod must not be touched; Scoring criteria: 20 points will be deducted from the bumper bar; Failure to follow the prescribed route and fail; Less than 10 kilometers per hour, failing; If the ignition is turned off, 20 points will be deducted.

    Driving skills: The key is at the second door. After the body passes through the first door, then hit the direction.

    As soon as the right corner of the front of the car is aligned with the right lever of the second door, it immediately returns to the body, and the body passes through the second door. In addition, try not to brake as much as possible, otherwise the speed may be less than 10 kilometers per hour and you will be judged to fail.

    The test requirements for right-angle turns are: use low speed to follow the prescribed driving route, and pass through a 90-degree sharp turn without stopping. If you can't turn, you can use a reversing car, but you will be deducted 10 points; Scoring Criteria:

    Wheel touch protrusion, fail; If the wheel touches the curb once, 20 points will be deducted; With the help of reversing, 10 points will be deducted.

    Driving skills: right angle of left turn: before entering the right angle, keep to the right side of the car, and wait for the small flower on the triangular window on the left front door of the car to hit the pole, the direction to the left is killed, and the road is straight back to the right.

    Right angle of the right turn: Before entering the right angle, keep to the left, and when the edge of the right rearview mirror on the right front door of the car is on the pole, the direction is to the right, and the road is straight back to the right.

    Curve driving is one of the assessment points of subject 2 of the driver test, which requires students to drive on an S-shaped road surface with a specified width under the condition that the vehicle must not squeeze the curb line.

    The test requirement for curve driving is that the vehicle enters from one end of the curve and slows down to change gears to resist the exit from the other end at low speeds. Do not squeeze the edge of the road during driving, and use the direction freely.

    Scoring criteria: rolling and rolling road teeth, deducting 20 points; Stopping halfway and failing; If the ignition is turned off, 20 points will be deducted.

    Driving skills: The test room is actually an "S" shaped road, but the width of the road is only 3 5 meters. First, we must keep driving in one gear throughout the whole process, and we should not be too quick to hit the direction. Second, when driving towards the right curve, the right wheel is attached to its right curb, and vice versa.

    Passing the unilateral bridge is an assessment point of the driver's test, which requires students to accurately use steering, correctly judge the straight driving trajectory of the wheels, and press a narrow bridge on both sides of the road under the left and right wheels successively, and pass smoothly.

    Driving skills: use the left rib on the front cover of the car to the middle of the left side of the bridge, has been pressed, and so the left front wheel completely under the left side of the bridge, the left rear wheel has not yet been off the bridge, the direction to the right to play a circle, and so on the left side of the bridge when the left side of the left side of the bridge, the direction to the left side of the left side, the direction to the right side of the left side, the midpoint has been pressed on the left side of the side.

    I hope it can help you and I wish you all the best in your exams.

  2. Anonymous users2024-02-04

    Generally speaking, subject two.

    You need to practice for about 15 to 20 days before you can take the exam, of course, it depends on the learning ability of each student.

    There are some students who learn faster and may not need so much time to take the exam, but there are also some students who have a slower grasp of knowledge and need to study for a longer time to be able to firmly grasp the key points of knowledge.

    Generally speaking, subject 2 requires 15 to 20 days of practice before you can take the exam, of course, it still depends on the learning ability of each student. Some students learn faster and may not need so much time to take the exam, but there are also some students who are slow to master the knowledge and need to study for a longer time to be able to firmly grasp the key points of knowledge and then take the dilemma exam.

  3. Anonymous users2024-02-03

    Subject 2 test driving test detailed explanation, full perspective and thorough explanation of right-angle turning skills.

  4. Anonymous users2024-02-02

    The learning of subject 2 is mainly to master the clutch, how to control the clutch, and the control of the clutch directly affects the whole subject 2 project practice.

    In the operation of subject 2, the coach basically does not let the students use the accelerator, and only needs to cooperate with the clutch and brake. Here's the right start for Subject 2:

    Subject 2 ramp start is most afraid of turning off the engine and slipping backwards, so we should pay attention to three steps:

    1. First of all, light the throttle and release the clutch slowly.

    3. Finally, as soon as the car starts, slowly release the clutch.

    The precautions are as follows:

    1. Before going uphill, the body must be adjusted to ensure that the body is within 30cm of the right side line;

    2, slowly lift the clutch, when the body has a shaking feeling or the engine sound becomes dull, the left foot stops, the right foot lightly steps on the accelerator, when the speed is close to 2000 rpm, the right foot does not move, the left foot slightly loosens the clutch, so that the speed drops to 1500 rpm, slow down the handbrake, the car is moving forward;

    3. Do not step on the clutch or accelerator downhill.

    4. Step on the clutch and brake to the end to avoid slipping, hang neutral gear, turn the key to ignition in bend, and after successfully landing the car, hang into the forward gear, slowly release the clutch, and then slowly release the brake after the clutch reaches the state of semi-linkage, and the car can continue to take the test as it advances.

    5. When going uphill, first of all, pay attention to the road side distance (30cm), which is the same as pulling over, slowly push the wheel to the right, and look at the roadside at the front 1 3 places.

  5. Anonymous users2024-02-01

    1. Go to the examination room to practice on the spot One or two days before the exam, find a way to enter the exam room to simulate a few times, which is of great help to the actual exam. There will also be some driving schools that organize all students to take mock tests. This will help you find out what is going on in the exam room and will reduce the tension during the exam.

    2. The required documents are fully prepared, no matter what the test is, the candidate's information on selling training liquid must be checked on the spot, and the driving test is no exception. Your ID card should be prepared in advance, and other test materials will be issued to your hand before the test starts.

    3. Although there are many test items in subject 2, the mentality in the examination process is more important.

    4. The examination items should be kept in mind that the subject 2 examination items are divided into five items, including the reversing of the medium mold, curve driving, ramp fixed-point parking and starting, side parking, and right-angle turning. Although we usually practice separately and the order of the test is different for each venue, don't miss any item and go back to the test.

  6. Anonymous users2024-01-31

    There are five items in the second test subject, which are uphill starting, right-angle turning, curve driving, side parking, and reversing into the garage. It's best for novices who have just practiced to practice one project at a time. For the first two days, I was not in a hurry to get into the car, but to practice playing the steering wheel.

    The way you play the steering wheel is very important, and the way you hold the steering wheel is related to the safety of driving after you take the test or get your driver's license. )

    After mastering the steering wheel, the first item is to get on the car to practice chasing the line (that is, the body and the road teeth are kept at about 30 cm), the chasing line is very important, and the practice is not good related to the next few items. I probably practiced and then went back to the line for two or three days. Maybe many students have practiced all the items, but when it comes to highlights, they can't chase the line.

    Some of them didn't even know how to look at it, and when I started to get in the car, the coach pointed out to me with a small flashlight, and I couldn't understand it for a long time. Right-angle turns, many students do not grasp the line at the beginning, not to hit the direction early or late, this is the point to talk about, will not look at the point in minutes. Of course, each driving school teaches something different, and the point is different from your sitting posture and height.

    A right-angle turn just mentioned, and the previous practice of playing the steering wheel and chasing the line has a lot to do with it, before turning to chase the edge line of 30 cm (turn left, the right side of the car and the edge of about 30 cm, turn right on the left side of the body and the edge line of about 30 cm), why emphasize 30 cm, because this turn is not easy to press the angle line. Adjust the body before the car turns, align the 30 cm line, hit the turn signal, the slower the speed, the better, and wait for the steering wheel to be killed when the lower edge of the reversing mirror is parallel to the corner line, and the body immediately returns to the steering wheel after completing the turn. If you don't practice playing the steering wheel well, this right-angle turn will not operate well (one and a half circles to the left, one and a half circles to the right), which side of the steering wheel to hit more, how much must be returned, and when to return?

    How to get the steering wheel back to the right and the body right? Many novices don't know how much they play the steering wheel. That's why I started to say that you have to practice one project at a time before you can practice the next one.

    They are all the most basic, even the most basic things are not solid, let alone the exam, even if you rely on luck, then driving will definitely be a road killer.

    The second subject is mainly to practice the basic items, that is, the skills that must be mastered to drive a car. Correct use of the steering wheel, right-angle turning, curve driving, half-slope start, sideways parking, reversing into the garage, these items have skills, that is, to look at the point. My practice is to practice the car on the same day to remember the coach pointed out to you the point to operate, keep it in your mind, the next day to practice in accordance with this method to slowly summarize, subject two is not more practice, but more thinking.

    Learn it that day, pay attention to whether your operation is correct, and if you don't practice well, think about what the problem is. If you practice like this, you will soon be able to take the pre-exam.

  7. Anonymous users2024-01-30

    There are three points to pay attention to in the second subject, the first is to have a stable mentality, don't be nervous, and remember the skills taught by the coach when practicing the car; The second is to learn to control the speed of the car through the clutch, don't talk fast during the test, just take your time and be able to pass; The third is to remember to look at the points, and remember the points taught by the coach of each project and do it according to the requirements.

  8. Anonymous users2024-01-29

    1. Before the test, please pay attention: bring the original ID card, do not wear slippers, high heels, or colored sunglasses. 2. Pay attention to the following when waiting for the exam

    Carefully recall the details of the operation of the test project, reproduce the technical flow of the project in your brain, and ignore the discussions of others so as not to disturb your own mind. 3. After getting into the car, pay attention: first fasten your seat belt, adjust the seat and rearview mirror, and adjust the test car to the most familiar look you usually have.

    Then, according to the process, operate calmly: (1) When reversing into the warehouse, remember to hit the direction "sooner rather than later", and predict the point so as to leave room for adjustment. (2) When parking on the side, control the speed of the vehicle and try to slow down as much as possible.

    3) When starting on a ramp, be anti-slip. (4) When driving in a curve, try to turn the car to the outside of the curve as close as possible to the corner. (5) When turning at a right angle, try to get as close to the right side of the road as possible before turning, and the speed should not be too slow.

    As long as you practice your skills well and keep a calm mind, you will be able to pass the exam in Subject 2 successfully.

  9. Anonymous users2024-01-28

    When taking the second subject, you must pay attention to the problem of speed, whether it is parking on the side or when reversing into the garage, the speed must be particularly slow, and also pay attention to the position of the curve with the rearview mirror, hit the steering wheel in advance, and do not go to the distance to play.

  10. Anonymous users2024-01-27

    Be sure to keep your mind steady and relaxed. The exam must be slow, and you must remember the corresponding markings according to your own test room, so that it will be easier and easier to pass the exam.

  11. Anonymous users2024-01-26

    1.Judgment tests are performed at the time of warehousing. Look at the rearview mirror to judge accurately, hit the steering wheel hard, stop at a steady speed, relax, and be quiet.

    2.Test the control of side parking, control the distance between the front and rear cars, remember the parking skills, pay attention to the strength, summarize the experience, and master the rules.

    3.Check the coordination of ramp parking and starting, control the clutch and brake, figure out the sequence, study carefully, practice more, don't be nervous, don't be serious.

    4.Right-angle turns are not difficult. Test your ability to master the wheel of the wheel. The coach tells you to kill, and you hurry up and fight. Be obedient, don't be afraid, it's okay.

    5. Driving in corners is very simple, hitting the steering wheel to find the strength and amplitude, controlling the speed and looking at the line, which is the most important thing to talk about stability and accuracy.

    6.The second subject is to learn skills, find patterns, and memorize. If you don't know how to work hard to practice Hantong accompaniment, just ask. Maintaining a good mindset is the most important thing.

  12. Anonymous users2024-01-25

    Subject 2: Reversing and entering the garage, ramp fixed-point parking and starting, right-angle turning, side parking, and curve driving.

    Expand your knowledge: Driver's license, especially subject two, is not the kind of important test that determines your life, it is very insignificant, after the test is nothing more than to get a driver's license earlier, if you can't take the test, then come a few more times, and after half a month of defeat, you are a good man, and you may not dare to go on the road immediately if you get it early.

    Don't put pressure on yourself, or even doubt your own ability, no matter what the coach does to you and gives you invisible pressure, you must learn to resolve it. The subject 2 exam is divided into five, reversing into the garage, side parking, ramp fixed-point parking and starting, curve driving, right-angle turning, and all five test items must be passed at one time.

    There are two opportunities for Subject 2 to be examined, i.e. one to make up one. If you fail the first exam, you will be retaken immediately. Those who fail to pass the make-up examination need to make another appointment for the examination.

    After the test, candidates should leave the test room quickly and should not interfere with others' tests, and then follow the guidance of the staff to sign and confirm the test results at the designated location, and the results without signing will be invalid.

    Attention on the bus: adjust the height of the seat, if you adjust it high, keep checking the upper gear, lower it and keep lifting it down, and the shorter ones are adjusted to the highest, and you can't lift it up when you mention it. Before and after adjusting the seat, hold the steering wheel with your left hand, pull the adjustment lever under the seat with your right hand, and if you can't pull it out, lift it up a little first and then adjust it back and forth.

    The optimal adjustment is to keep your hands straight and straight forward, with your wrists just above the top of the front of the steering wheel, which also ensures the dexterity of the hand steering operation.

    Adjust the backrest angle so that the backrest is 90° to the seat, and the correct way is to put your shoulders close to the backrest, straighten your arms, and make sure that your wrists can easily rest on the steering wheel.

Related questions
11 answers2024-02-09

I train my pectoral muscles every two days, and I can't recover at all. >>>More

14 answers2024-02-09

Documents are required for the transfer of ownership of a used car. >>>More

6 answers2024-02-09

Action 1: Barbell rollers.

1. Exercise methods. >>>More

21 answers2024-02-09

Oh, I think I like little girls very much, if the first child is a boy, I will insist on a second child, well, because I like girls more, I will be determined to have a second child.

13 answers2024-02-09

Generally, each electric vehicle battery is 12V, but also 6V (rarely used); The battery shell is generally printed with 6-dzm- (number), the number represents the battery capacity, such as: 12, that is, the battery is 12ah (ampere-hour); Generally, there are 10ah, 12ah, 14ah for small electric vehicles, 16ah, 17ah, 18ah, 20ah for large electric vehicles, etc., the capacity of the battery represents the size of the mileage that can be run, and the mileage of the large capacity is larger, and the larger one can be selected, ** The difference is not big; It can be connected in series to form 36V, 48V, 60V, etc., the general safety voltage is 36V, but with the current situation of overspeeding of people and goods, the voltage is getting bigger and bigger, and you can choose according to your actual situation.