Can you only guess at the beginning of Minesweeper, what are the rules of Minesweeper ?

You can only guess that you have to dig up the mine or clear the customs to see the actual mine.

There is a greater chance of a bomb next to Minesweeper 2 3 There are usually bombs next to it. That's all it can help with.

Band 2 indicates that there are two mines nearby, and 1 indicates that there is one. 3 is the same.

That's right, minesweeping is basically a matter of guesswork and luck.

The chance of a bomb next to Minesweeper 2 is relatively large 3 There are generally bombs next to it, and 1 means that there is one.

Have a pattern, and you are logical.

Actually, you can try your luck.

As far as this screenshot goes, four mines can be identified.

That depends on how much thunder you have!

1 represents that there is a thunder in the up, down, left, right and oblique angles of 1, and it is pushed in turn, 2 has 2 thunders, and 3 has 3 thunders. If you light a flag on the square that is indeed a bomb, you will be safe, and if you are not a bomb, you will be killed later. The question mark is three, I am not sure if there is a bomb here, and there will be no situation where I am killed by mistake.

Here's a trick, you can demine by pressing the left and right buttons next to a number at the same time.

The first point must not be thunder, haha.

Left-click to open, right-click to mark the mine with the flag, and the left and right keys can determine whether all the surrounding mines have been marked.

Each number represents nine grids around this number, and there are a few thunders! For example, 1 has only one thunder in nine grids around, 2 has two mines in nine grids around it, and so on.

Blocks can be mined with a single click. If it's a mine that is dug up, you lose the game.

If a number appears on a block, it indicates how many mines there are in the eight blocks around it.

To mark a square that you think might have a mine, right-click on it.

The play area includes a minefield, a mine counter, and a timer.

The number is the number of mines in the 8 squares around this block, the question mark is made by yourself, you can make a question mark where you can, and the flag is to make sure that there are mines there.

You have to look at the number after the point is pointed out to determine whether there is thunder or not.

"Minesweeper".The rules are as follows:

1. The square is opened and the number in the square is displayed, and the number in the square indicates that there are several mines hidden in the 8 squares around it. The number in the red circle is 1, which means that there is 1 thunder in the other 8 squares in the black box, and all the squares in the lower left corner must be thunder.

2. In the same way, if the number is 3, it means that there are 3 mines hidden in the surrounding 8 squares. According to this rule, Sakura will continue to deliberate, and finally find all the thunder.

3. Formula: The number on the minesweeper side represents the number of mines in the 3 3 area around it.

4. Detailed explanation: Press the left button on the block that is judged not to be thunder to open the block. If a number appears on a block, the number indicates the number of mines in the 3 3 area around it, which is generally 8 squares, 5 squares for side blocks, and 3 squares for corner blocks.

5. So the maximum number in minesweeping is 8; If the block is empty in pulse, which is equivalent to 0, the block adjacent to the empty can be recursively opened; If you are unfortunate enough to hit a mine, the play will end.

The rules of minesweeping are to click on the square, if it is a mine, the game fails. When the player is playing Minesweeper, he will click on a small man at will, and a small piece will appear, and the number displayed on it will represent how many mines are in the eight grids around.

The main area of the game is made up of many squares. Use the left mouse button to click on a random square and the square will open and the number in the square will be displayed; The number in the square state grid indicates that the 8 squares around it hide a few mines; If the open grid is blank, there are 0 thunderbolts around it.

The rules of minesweeper are:

A certain number of mines are randomly arranged in the rectangular minefield of the determined size (9*9 squares and 10 mines for the beginner, 40 mines for 16*16 squares for the intermediate level, and 99 mines for 16*30 blocks for the advanced level, the size and number of mines can be set by yourself at the custom level, but the size of the minefield cannot exceed 24*30), the player needs to find all the blocks in the minefield that are not mines as soon as possible, and are not allowed to step on the mines.

Operation of minesweeper:

1. Left-click: Press the left button on the block that is judged not to be thunder to open the block. If a number appears on a block, the number indicates the number of mines in the 3 3 area around it, and if the block is empty (equivalent to 0), the block adjacent to the empty can be recursively opened; If you are unfortunate enough to strike a mine, the game is over.

2. Right-click: Press the right button on the block judged as a mine to mark the mine (displayed as a small red flag). Repeat the operation one or two times to unmark (if the "Marker" (?) is checked in the game menuIt will take two operations to cancel the mine).

3. Double click: Press the left button and the right button at the same time to complete the double click. When the number of marked mines around the double-click position is equal to the number of the position, the operation is effective, which is equivalent to a left-click operation on all unopened blocks around the number.

Double-clicking when a mine is not fully marked has no effect. If there are mismarked mines around the number, the game ends with a " " on the mismarked mine

Minesweeper Gameplay Rules:

We click on a random square, and the square opens and shows the number in the square, which means that there are several mines hidden in the 8 squares around it.

In the red circle as shown below, the number is 1, which means that there is 1 thunder in the other 8 squares in the black box, and all the squares in the lower left corner must be thunder.

Similarly, if the number is 3, it means that there are 3 mines hidden in the 8 surrounding squares.

If you follow this rule, you will eventually be able to find all the mines.

Tips for minesweeping:

If the number is clicked, it means that there are several mines in the 8 positions next to the number, and if you dig the ground, you will lose the game and start again, so there is also a certain element of luck in minesweeping.

The rules of minesweeping are to click on the square, if it is a mine, the game fails. When the player is playing Minesweeper, just click a small man on it, and a small piece will appear, and the number displayed on it will represent how many mines are in the eight grids around, and the thunder can be judged to be a flag, and all the mines will be found to be a victory.

The main area of the game is made up of many squares. Use the left mouse button to click on a random square and the square will open and the number in the square will be displayed; The number in the square indicates that the 8 squares around it hide several mines; If the open grid is blank, there are 0 thunderbolts around it.

Introduction to how to play Minesweeper. There is a total of one mine in the up, down, left, right and oblique angles of minesweeper 1, and it is pushed in turn, 2 has 2, and 3 has 3. If you light a flag on the square that is indeed a bomb, you will be safe, and if you are not a bomb, you will be blown up later.

The question mark is not sure if there is a bomb here, and there will be no situation where the wrong thing is blown up. If you mark the wrong thunder, it will ** and the game will start again.

The minesweeper formula is one clip two, one with thunder. Two sandwiched one, there is thunder in the heart. Two sandwiches and three, all thunder. On both sides, there are thunders. Three in a row, there is thunder. Four in a row, there is thunder on the side.

Explanation:

The number indicates the number of nearby 8 slots, so if the number is 2, there will be a total of 2 mines in the surrounding 8 slots.

Basic Determination Mine: Based on the above rule, if the surrounding open space = number, then the open space is [Basic Determination Mine].

Equivalence: The number minus the number of surrounding mines is [equivalent number], so 3 determines that there is 1 thunder around, then it is equivalent to 2.

Equivalence will play a key role in the subsequent application of the formula, basically, it is to change some situations that do not conform to the formula into cases that conform to the formula.

121, there is thunder on the side: when 121 columns appear, and 2 only has one side of the open space (3 grids), then as shown in the figure, the oblique side of 2 is determined to be thunder (and the positive side of 2 is determined to be no thunder). Since there is a definite mine around the 2 of "2122", it changes to the form of "2121", and the above formula is applied.

Two in a row, there is thunder on the side: when "A21B" appears, the positive side of A is a definite thunder (and the positive side of B is determined to be free of thunder).

A kind of equivalent transformation of two in a row: in this case, "314 flag", because there are 2 thunders on 4 sides, then 4 is equivalent to 2, and the transformation is "312x", apply the above formula.

1221, two-sided thunder: When "1221" appears, 2 determines the thunder.

Two clamps and one, there is thunder in the heart: in the case of "x212x", the 1 positive side determines the thunder (and the oblique side of 1 determines that there is no thunder).

In this case, although it is not possible to determine the location of the mine, it can be determined that there are no mines in the upper three squares. The principle is that since thunder must appear in the second row, so the 1 of the second row has been satisfied by the second row, then there is no thunder above. And if you advance one more square, the 1 of the second row is satisfied by the third row, then there is no thunder in both 1 and 2 rows.

The purpose of mine clearance is to ensure the freedom of movement of the armed forces and the safety of residents' lives and property, and to restore normal order in production and life as soon as possible.

There are mainly manual minesweeping, blasting minesweeping, mechanical minesweeping, magnetic simulation minesweeping device minesweeping, and comprehensive minesweeper minesweeping.

1. Manual mine clearance. A method of mine clearance that disables mines or mines by hand, or removes or destroys them. It is usually carried out by trained personnel or detachments.

This method is thorough and suitable for all kinds of terrain and weather conditions, but the operation speed is slow, the mine clearance efficiency is low, and the safety is poor.

2. Blasting and minesweeping. Use explosives** products and shock waves to detonate or disable mines. Commonly used minesweeping charges include in-line charges, group charges, and detonating cable nets (or detonating cord curtains).