Please help me with my computer whiz!! Thank you so much!

This is all an approximation.

It's not sure what the reason is, it's best to get it to the maintenance department.

Otherwise, if it gets hurt, it will be in trouble.

Well, you don't have an antivirus? Yes, anyway, let's scan it first, if this poisoning is poisoned, it seems to be quite heavy. It is best to enter Safe Mode to scan.

After turning on the computer, press F8 to enter, and then it will be the same as the usual scanning. As for whether there are problems elsewhere, I don't know.

It doesn't have to be a motherboard problem, it may be that there is a problem with your computer hardware (not plugged in properly), just plug it back in! If it doesn't work, just install the system once (sound card problem).

Reinstalling an operating system, and then installing a one-click ghost is the easiest, and you don't have to worry about it in the future, once and for all.

The Fundamental Way to Solve Software Problems:

Reinstall an operating system (preferably the latest version.

The easiest, you don't have to worry about any software problems in the future.

Note that the system is installed on the C drive, and the key software should also be installed on the C drive, such as Office and Winrar, once and for all.

Then use the latest antivirus software to fully disinfect the virus. (To make sure it's easy to use, Rising or Kaspersky is recommended) again.

with"One-click ghost"Back up the C drive.

In a similar situation, restore the original backup system within 2 minutes.

When using, please make a backup of your favorites, my documents point to other disks such as E disk).

I've also encountered such a situation, and finally I reinstalled the window xp once and it was normal.

The fact that the optical drive cannot run under the system does not necessarily mean that there is a hardware problem, it may be a system problem. One of my classmates had the same situation. You first get an XP installation disk, see if you can boot the system from the disc, if you can, then there must be a problem with the system, reinstall the system is OK.

I guess it's a hardware problem, so you'd better go find the person who installed the computer for you.

Someone should be called to your house!

What went wrong.

The program file is corrupted, and it is time to upgrade or reinstall the system.

1. It may be the motherboard burst: you look at the capacitors on the motherboard to see if there is a bulge. 2. See if your CPU fan is slow.

3. Restore the BIOS settings. 4. Restore the system with a disc, and then enter the safe mode with the network, **A good antivirus software (Kaspersky is recommended) (be sure to uninstall other antivirus software before installation) antivirus,

I had a similar problem with my computer some time ago and I checked a lot of things later. Only then did I know that the power supply was not working. Really, I didn't think it was a problem with the power supply.

Put the power supply unloaded and check that the voltage is normal. But it just can't be loaded. I just changed the power supply.

Let's try it by changing the power supply first.

Problems with the motherboard, the motherboard is the bridge that connects all the devices, and there is also a problem with the sound card.

If you're from the south, just hang a rice cracker's antiseptic bag in the case.

It should be infected with a virus, the easiest way is to open the host and disassemble all that can be disassembled, and then install it as it is, it should be fine, but be sure to check the virus, and install a firewall!

Go reinstall your computer! Don't forget to give points!

Let's kill the virus first. Try deleting the plug-in on the machine. It is a system program that belongs to the Microsoft Windows operating system, and Microsoft's official explanation for it is:

is the name of the common host process for a service that runs in a dynamic link library (DLL). This program is very important for the proper functioning of your system, and it cannot be terminated.

The memory cannot be buried for a written or read solution.

Problem When running some programs, sometimes a memory error message appears, and then the program is closed.

0x???The "0x??? referenced by the directiveMemory. The memory cannot be "read".

0x???The "0x??? referenced by the directiveMemory, which cannot be "written".

Generally, there are many aspects of this phenomenon, one is the hardware, that is, the memory is the problem, and the other is the software, which has many problems.

Failure Analysis Hardware:

Generally speaking, there is not much chance of memory problems, and the main aspects are: broken memory modules, memory quality problems, and 2 nos.

Mixing memory of different capacities of the same brand is also more likely to be incompatible, and it is also necessary to pay attention to heat dissipation problems, especially after overclocking. You.

You can use memtest to check the memory, which can completely detect the stability of the memory.

If it is dual memory, and it is a mix of memory modules of different brands or when you buy second-hand memory, this problem occurs, at this time, you should check whether it is not.

It's a memory problem or it's not compatible with other hardware.

Software: Let's talk about the stock solution first: there is a place in the memory called the buffer where the data is stored, and when the program puts the data in one of its positions, because there is not enough space, overflow will occur. Take a sedan chair as an example: a bucket can only hold one pound of water, and when two pounds of water enter, it will overflow. And the system.

It's on the screen. This problem often appears on Windows 2000 and XP systems, and Windows 2000 XP on hardware.

The requirements are very demanding, once encountering resource deadlocks, overflows or illegal operations similar to Windows 98, the system will be released in order to maintain stability.

Now the above situation. It can also be caused by poor compatibility between hardware devices.

If that doesn't work, it's recommended that you restore the system or reinstall it.

myexue

Adoption rate: 22%.

Merit Points: 17

Runtime error appears in a small note, the general problem is in the registry, "run-regedit" to open the registry, the stupid way is to press f3 to enter and exit the "runtime", find all the values named runtime, and then delete them one by one, but this is too much, and it may not be possible to delete it for half an hour (I have been troubled by the problem of runtime error for a long time, this stupid method has been used, and it has not been deleted for 20 minutes), The smarter way to do this is to narrow it down!

Where are the general errors? In my experience, it's usually here! hkey local machine software microsoft windows currentversion run,Search for runtime items in this,Delete it,Get it in a minute at most!

Causes: There are many reasons for runtime errors, I still don't know, I guess it's because some junk software and rogue software are forced to install it into your computer! The consequences are often as follows:

Right-click on each symbol on the computer, and the menu is at the top"auto"Instead of "open", there is an error in QQ and other software, requiring restart, at this time it is useless for you to reinstall QQ, and the registry must be cleaned up first if there is an error.

Once a program is written to the registry, it will prompt it immediately and display the installation path, so that there will be a runtime error, you can go to the registry to find those runtime error entries according to this path, and there is a target!

If you really can't do it, you have to reinstall the system.

It may be that the system is unstable, it is recommended that you reinstall the system.

Typical hardware issues, motherboard How many times exactly? Is it more than 2 times? That's going to need to redo the system This. There is no preheating on the computer. Is there a problem with the boot file? I've met you before.

10 meters, you're still studying.