Lenovo B4360CPU G1610 can be replaced with E3 1230V2 Do you need to update bois?

No, the G1610 is the same as the E3 1230 V2 architecture, both are IVB, which can be lit perfectly, but it is better to change to a better radiator, E3 69W, G1610 is only 35W

Dear Lenovo users, it is recommended that you check the CPU model supported by your computer on the official website of Inter Chipset through your motherboard chipset. In addition, we do not recommend that you replace your hardware by yourself, because the new hardware may have compatibility issues, and the hardware problems caused by your unauthorized disassembly will not be covered by the warranty. It is recommended that you go to the local Lenovo service station to test the installation, and the service station staff will solve the problem for you

IDEA Forum.

Think Forum.

Lenovo Community.

The landlord wants to get a virtual machine???

Immediately press the "Enter" key when you see the ThinkPad logo at boot and press the FN + F1 keys to enter the BIOS Setup Utility using the arrow keys, scroll to "Security", then press the Enter key to scroll down to "Virtualization", then press the Enter key to "Intel (R) Virtualization Technology", and then press the Enter key.

Select Enabled, then press Enter, press F10, select Yes, then press Enter to shut down (power off), wait a few seconds, and then restart your computer.

Before displaying the scrollbar, if it is a notebook, press and hold F2, there is an English version, there is also a Chinese version, you can set it yourself, and then it seems to be in the third one from the right to the seat, which is installed under the open CD, restart, press F12, select the option that contains the CD.

Dear Lenovo users, hello! You can refer to the Lenovo Technology Forum, where there is a comprehensive knowledge and analysis discussion.

IDEA Forum.

Think Forum.

Lenovo Community.

Hope it helps you and have a great day!

1. Enter the BIOS, change the first boot to HDD in the Advance option or boot menu

2. Take out the disc.

IBM (press F1 when booting, some new models can press F1 when restarting) HP (HP): press F2 when starting and restarting;

Sony (Sony): Press F2 on startup and restart;

Dell: Press F2 on startup and restart;

Acer (Acer Base): Press F2 on startup and restart;

Toshiba: When turning on, press ESC immediately, then press the prompt, and then press F1 or F2;

Fujitsu: Press F2 on startup and restart;

NEC to start or restart, press F2 and press according to the prompt;

The vast majority of domestic and Taiwanese brands: press F2 when starting and restarting.

F1,F2,F12,CTRL-F1,F10,Generally the del key,,, but there are f2, f8, f12, etc., you try it, press the "del" key continuously after booting up or f2, f8, f12...

Other questions can also be compared in the two forums, the idea forum.

Think Forum.

Hope it helps, thank you.

f2, f10, f12, just one of the three, should be f2

There is no charge. But I don't know after the warranty period, you can call ** to consult.

In that case, I don't know about it, you can call for a free **consultation--

There is no charge for brushing the BIOS, but the after-sales service will not help you brush it. Failure is waste.

Insert the startup disk.

Restart and press f12 wildly

The drive menu will pop up.

Select the drive (optical drive) where the startup disk is located.

If it is genuine, it will appear.

press any key to continue…When you see this prompt, quickly press the spacebar to continue.

It's BIOS, I remember that the Lenovo notebook pressed F12 to enter the disc to boot;

It is also possible to set the boot item for the disc boot item in the advanced BIOS.

Dear Lenovo users, hello!

You can press F12 repeatedly to enter the boot device list when you boot up, select *** optical drive device from it and press enter to start.

IDEA Forum.

Think Forum.

Power on press F12 and then select the disc to boot it on.

Or press F2 on boot, boot, and also select the disc to boot.

Look at the hints, you can't just try from F1 to F12 by yourself, it may also be ESC and DEL.

It is recommended that you use a one-click restore, so that you will not be so troublesome, if you don't understand, there is a certain risk in modifying BOIS, and it will paralyze the machine if you don't get it, think twice.

Lenovo laptops have one-click recovery, no need to reinstall the system, just patch after recovery, and install application software. If you have a one-click backup in the middle, you can go back to that backup point, which is also very convenient.

Other questions can also be compared in the two forums, the idea forum.

Think Forum.

Hope it helps, thank you.

Don't install the ghost version,,The laptop is not suitable.。。 Install that pure version of the system.

Ask Lenovo's technical service directly! The attitude is very good!

My G450 installed XP can't wake up when it enters standby, I feel speechless, and the customer service doesn't know what's going on! Notify me if yours are resolved. I've been using win7 for a month and feel fine!

Hello, it is not recommended that you upgrade the BIOS, the motherboard may not be used normally due to misoperation, according to the situation you described, you can contact the service station to detect and repair the motherboard, so that it can be used normally.

Pull out the jumper cap and try to restore the BIOS, if it still doesn't work, then it may be a cup.