-
Very simple! The problem is that you have several hard drives, and when the "file system" format of each partition of these hard drives is wrong, the hard disk often fails to open.
Please check whether the "file system" format of each hard disk partition is the same, the method "right-click the hard disk partition - properties, it is recommended to use the fat32 format when formatting.
If the system is xp, start the menu run, type cmd, open the command prompt, and enter.
convert d:/fs:ntfs
To convert other disks, please replace the D in it: If e: then convert the E disk.
Don't pay attention to anything. If you are asked whether to dismount the volume or whether you want to convert it the next time the system restarts, select Y
Finally, let's look at the prompt, if the conversion is successful, congratulations. If there is no prompt, then restart the computer, and it will be automatically converted when it starts.
This is XP's own conversion process, which will not damage any files, including the system disk, can also be converted, so it doesn't work, so go to the computer company
-
How many areas are displayed in the portable hard drive? If you want to format it in full, find someone to recover the data, and it costs money.
If you just want to format the C drive (the first area of the 120G drive), then check it and reinstall the system.
-
If there is a problem with the system, you need to reinstall the system, and if you want the contents of each drive letter, you have to choose to repair the system.
-
nono..Take it out. Put it on another machine, copy it out and save it, and then take it back and format it.
-
A hard disk usually refers to a computer hard disk, but it can also be defined as a "carrier" of computer data. The main scroll of the hard disk is to store data, it has the advantages of fast read and write speed, low energy consumption, small size, etc., but in the process of use, there will always be problems of hard disk data loss, such as virus infection, misformatting, accidental deletion, power failure during operation, hard disk damage, etc.
And if you want to successfully recover the data in the hard drive, you can try the two methods shared below, and the effect is very good
Method 1: Professional Recovery
Directly run the installed superrecovery software, on the first interface we can see six recovery modes, directly select the "accidentally deleted file recovery" mode. Then, select the location and specific type of data you want to recover and click "Scan". Finally, after waiting for the software to scan the finished one, you can preview the specific list for free, confirm that you want to find the recovered data, and click the "Start Recovery" button.
Method 1Method 2: Free Recovery
If your data has just been deleted, you can recover it with the help of a shortcut to recall. However, we are talking about data that was deleted three years ago, and it is clear that this method will not work. And if your data is more important, then you can try the system registry rename recovery function.
The way of manipulating the burning boy is relatively fixed, just find the corresponding file name in the system registry interface, directly rename it, and modify the item value to "**station", and restart the computer.
Method 2Note:The first method is suitable for the problem of large liquid data loss in most scenarios, and the second method is suitable for the problem of data recovery from emptying the ** station
-
Nowadays, everyone uses a computer, and it is inevitable that you may encounter such a thing as hard drive data loss. Don't be afraid when you encounter it, there are many software for hard drive data recovery. Find a more reliable recovery software from a large manufacturer, most of which can solve your problem.
I'm here to introduce a few to the subject!
1. Recoverit ExpertsPros:
Steps to use Recoverit for data recovery:
Step 1: Select an external disk
Run Recoverit on your computer, light up the USB flash drive SD card mobile hard disk in the [External Disk] column in the software interface, if the mobile hard disk is partitioned, you should also check the corresponding storage disk, here take "U disk" as an example. After checking the target external disk, click the "Start" button in the lower right corner.
Step 2: Scan the external disk
Recoverit will automatically scan the external hard drive, and after the scanning, you can browse the scanned software in the [Path View] and [File View] on the left.
Step 3: Preview the recovery
Users can find the lost target files through the [File View] mode, directly preview them on the right side or click to enlarge the preview, and click the "Recover" button in the lower right corner to retrieve the lost files after confirmation.
2. Top data recoveryTop Data Recovery Our second best hard drive recovery tool because the software is reliable and easy to use. It allows users to recover data up to 500MB for its free version and offers unlimited scanning of lost files and can also preview the scanned files before recovery.
Pros:
Cons:
3. Easy Data RecoveryE-Wo is a data recovery company based in Chengdu, Sichuan, with a high share of overseas markets. It can recover most types of files such as audio, documents, etc.
Pros:
Cons:
4. Universal data recoveryMagnum Data Recovery has always been an old brand and name in the hard drive data recovery industry, but since it has grown until now, it is still one of the easiest and user-friendly data recovery tools for tech novices and beginners.
Pros:
Cons:
5、easyrecoveryEasyRecovery is a powerful and user-friendly data recovery software that is pretty cool for recovering lost, deleted, formatted, and corrupted hard drive data.
Pros:
Cons:
That's all for this sharing, I hope it can help you!
No matter how professional the software is, there is no guarantee that all data can be recovered, and how much can be recovered depends on the specific situation, and there is still a certain probability that it cannot be fully recovered.
First of all, it depends on the specific situation of your hard drive, if the hard drive itself is physically damaged, this recovery will be more troublesome, so in this case, it is better not to do it yourself, and find a professional to help you recover.
If there is no physical damage, then you can take advantage of itMini Rabbit Data RecoverySuch professional software to recover data to try.
Are you sure it's the most recent machine? Also don't know what system your machine comes pre-installed? You try to enter the BOIS to adjust the mode of the hard disk,Generally the default is SATA,You can change it to the IDE to try it Very old version,You use it on the current computer hard disk at will,It's easy to turn the hard disk into a corpse But this will affect the read speed of the hard disk It is recommended that you go to the nearest after-sales service to install a system It is better to give some money than to do it yourself
Buy a portable hard drive enclosure and put it on.
Author: Ravington - Assistant Level 2 4-27 13:22Unless it is a hard disk in this book, it can be used as a mobile hard disk in a mobile hard disk box, and the hard disk of a desktop computer is not allowed, unless it goes through a special processing interface, and there must be an external power supply. >>>More
There is no problem with two hard disks on the computer. There are several hard disk ports on the computer motherboard, and several hard disks can be installed. You plug the hard disk with the system into the socket of SATA1, and plug it into the socket of SATA2 as the hard disk of the storage warehouse (in fact, as long as the hard disk with the system is plugged into the SATA1, you can plug it into the hard disk of the warehouse). >>>More
Right-click on the Arrange Icons and select Show Desktop Icons. >>>More
Find the computer management in the control panel, generally in the performance ......Management tools ......Computer management. >>>More