Why does the computer have no signal for a few seconds after the scrollbar is turned on is very deta

The first question is quite normal. There are still a lot of things that need to be loaded after the scrollbar, including the graphics card driver or something, depending on the size of the driver and other reasons, of course, the signal needs to be stopped for a while.

The second problem is to modify the dpi value of the font in the display properties. As for the blue screen issue, one estimate is that your operating system has been used for a long time and needs to be redone. Also, depending on the configuration, your machine is already very old, and you need to clean up the dust inside the case, and the aging of accessories is also a reason.

It's obviously a problem with your system, and when the system starts, he starts to detect your input method, font, and so on. But if there is a problem detected, then where will he get stuck, it may be automatically repaired. However, the health value in the registry is already incomplete (maybe a DLL file is missing).

It is easy to cause a blue screen in the system.

It is recommended that you use software such as Windows Optimizer to repair the registry. If it doesn't work, fix Windows, and if it doesn't work, you can only reinstall it.

The scrollbar is just a log

Something like "Starting, please wait......”

When it's time to load graphics drivers and desktop themes.

There will be a flicker of the gap.

Because it wants to read the user's display configuration.

Then adjust the display effect according to the user's requirements.

This is normal.

It has to do with the type of your graphics card, etc.

Different graphics cards have different driving effects.

Even integrated graphics cards have a similar phenomenon.

If you have installed the system manually.

You will notice that when the screen goes black briefly.

It's time to install the graphics driver.

The first problem: the driver is not installed properly, reinstall the driver.

Second question: There are many reasons for the blue screen, and it has nothing to do with the file you said, you can hi me.

Hope it helps,

The reason why there is no signal is because the machine is dead or the machine is powered off.

Check hard drive, power ,。。

You have to think about this, don't keep struggling with the graphics card.

Requires access to the BIOS shield onboard graphics card.

Enter the safe mode to reset the resolution, if it doesn't work, reinstall it, it can generally be solved.

There's a problem with the graphics driver.。。。 And also.. If you want to install the system, you also need to set the optical drive boot in the BIOS. Otherwise, you can put it in and use it.

Plug and unplug the memory module to see if it works, if it really doesn't work, it may be caused by too much dust in the case, good luck.

If you have a problem with the driver of the graphics card, install a driver with a lower version in safe mode.

Is it the reason why you have turned the display resolution too high? The reason why your monitor doesn't support such a high resolution?

The resolution is adjusted too high, the display does not support it, in safe mode, reduce the resolution, and adjust it in the system.

Raise it to 100 points! Following.

Reset the monitor to factory settings.

There are several possibilities for this scenario:

1.System problems - you can try to press the F8 key when you turn on the computer, enter the safe mode, see if you can enter normally, if you can, you can basically determine that it is a system problem, and reinstall the system can be solved;

2.Hard disks have bad sectors - can be detected by software detection;

3.There is a problem with the hardware - try to boot the computer and press the del key to enter the BIOS, then do not operate, wait for it for a few minutes to see if the same problem occurs.

In short, you can reinstall the system first and try it, which can solve the best, if you can't solve it, you can only send it for repair.

Because your resolution cannot be displayed on the monitor, it is recommended to press F8 to enter the safe VGA mode after powering on, set it in the display properties, change the resolution to the resolution of your display, generally 800x600 1024x768 can enter the system.

The resolution is too high or too low The monitor cannot be displayed It is recommended to press F8 to enter the safe VGA mode after powering on Set in the display properties Change the resolution to the resolution of your display Generally 800x600 1024x768 is OK!

Oh, don't worry. Your computer is not automatically updated. The pirated system you installed does not support the update, even if the update is completed, as long as you restart it, you will not be able to enter the system!

Let's make the system There is another way: use the win pe disc to enter the system to delete the latest updates, it is better to redo the system. When you're done, turn off automatic updates for the system.

Patch with security software.

Forehead. That person thinks that the system can only be reinstalled. There are many ways to reload, so let's step on it yourself.

Just redo the system is the easiest way.

That's because it's a disk check. Press any key to finish it.

However, it is possible that the examination will still appear next time.

Select Start Run and type chkntfs t:0 in the run dialog box to set the disk scan waiting time to 0. If you want to ignore scanning a partition when the computer starts, such as a C drive, you can enter the "chkntfs x c:" command; If you want to resume scanning of the C drive, you can use "chkntfs d c:".

command to restore all chkntfs default settings, except for the countdown for automatic file checks.

Just redo the system .

Can't get rid of it, this scroll bar is the process of starting the system program, if you remove it, your computer can't turn on, the scroll bar can't be removed, you can only reduce the number of times it scrolls.

It is recommended that you reinstall the system directly and without repeating the same problem. When the computer is turned on to the scroll bar, it does not move, it is in a state of death, and it can only be restarted by forcibly shutting down.

It is generally a problem with the system, and at this time it is generally a hard disk detection.

Maybe it's a broken mouse! Or maybe it's too stuck.

I've also encountered such a problem, with PE is also into the scroll bar, the hard disk data cable has also been changed, the memory has also been cleaned up, it is not good, it is best to discharge the motherboard computer to solve it, you can also try ......

Hello! There is no information when the computer is turned on, and there are several reasons:

1. Hardware reasons, such as poor hardware contact and damage to a piece of hardware. Therefore, in this regard, we first check whether the hardware has poor contact, open the case, remove the memory module and independent graphics card, use an eraser or hard paper, repeatedly wipe the golden hand part back and forth, and use a hair dryer to clean the dust on the motherboard, reset the memory module and graphics card and then start it on; Not yet, check to see if there is a problem with the signal cable connected to the monitor and the host, remove both ends and try to reconnect, if necessary, consider changing the signal cable. If it is not a problem of poor contact, it may be that the hardware is broken, and it is recommended that it be best to send it for maintenance.

2. Software reasons, such as operating system damage, in this regard, are generally solved by this reinstallation operation.

Generally, the memory is oxidized with an eraser or a different slot.

Can the power button be turned off? If not, it should be dusty or oxidized from the socket of the memory module. Take it out and wash it with a cotton swab