LETV TVX50How to connect the external speaker

LETVX50Air,There are digital audio output and analog audio output interfaces,It is recommended to use the digital audio output interface to connect to the power amplifier。 LETVX50AirDigital audio output interface includes optical fiber、Coaxial two interfaces,If your power amplifier has these two input interfaces,Then,Use either of them。

Use optical fiber or coaxial connection between the TV and the power amplifier, in the audio settings menu of the TV, select the source code output (RAW source mode, not PCM decoding mode), in the ** film and television programs with Dolby Digital (AC-3) or DTS encoded audio, you can use the power amplifier to decode the audio, and push the speaker to output multi-channel sound effects.

The headphone jack will do the trick.

Hello, the super TV can be connected to an external stereo. You can do this by:

1.Use coaxial or optical fiber for connection, please refer to your Super TV manual for specific steps.

Step 1: You need to have a coaxial cable or a fiber optic cable. Connect the coaxial cable (or optical cable) to the corresponding interface of the TV and the power amplifier.

Step 2: Set up the power amplifier equipment and adjust it to the corresponding mode, the name and operation method of each power amplifier equipment are different, please refer to the power amplifier manual for debugging.

2.If your home amplifier does not have coaxial and optical interfaces, you can connect one end to the X60 headphone jack (audio output) through a male to 2RCA audio cable (as shown in the figure), and the other two ends to the L (white) and R (red) ports of the audio input of the amplifier, and adjust the power amplifier to the corresponding input channel.

LETV X50The power switch is designed in the back position in the lower right corner of the TV.

1.First of all, plug both the LETV TV and the stereo into the power source and turn on the power switch.

2.Then,Find the stool of LETV TV to guess the imitation audio output interface。 Typically, this connector is a millimeter headphone jack located on the back or side of the TV.

3.Connect one end to the audio output interface of LETV TV,The other end is connected to the audio input interface of the speaker。 The audio input of the speaker is usually an RCA jack or a millimeter headphone jack.

4.If you're using an RCA jack, make sure the left and right channel plugs are properly plugged into the speaker's left and right channel inputs.

5.Finally, adjust the volume of the speaker and the volume of your LETV TV to make sure you can hear the audio output. If you encounter any problems, please refer to the user manual of Sound Loud and LeTV TV or contact customer support.

It is recommended to follow these steps:

1. Put your mobile phone and super TV in the same LAN. Turn on the super TV"Multi-screen interaction"function,The option is in"Settings"-"System"-"Multi-screen interaction";

<>4. In the pop-up device selection window, list the DLNA devices in the current periphery, and select the device for screen projection as needed;

Step 2: Open the software and click the function key at the top right of the screen, the menu option on the left side will appear, click "TV List".

Step 3:How to connect to the local area network: After the mobile phone and TV are connected to the same local area network, find the TV ready to connect in the TV list.

2Connect to TV login method:Log in directly and be consistent with the TV TV version。

After connecting through the above steps, you can use the multi-screen normally.