How to use HUB to build multiple computers to access the Internet at the same time!

Connect the cat's network cable to the hub

Connect to another computer from the hub.

Each computer is equipped with dial-up software (find it on the Internet).

The host is turned on, the other can access the Internet, the host is turned off, and the client becomes the host (the software has an introduction).

Ethernet cable to the hub

Then connect each computer to the hub. ok

hub wants to set up a local area network.

What's the difficulty? Let me give you a detailed introduction to the hub setting up LAN method! Hope it helps!

HUB Set Up LAN Method 1:

First, set the IP addresses of the two PCs to and.

Workgroup setup.

Computers in a LAN should belong to the same workgroup in order to access each other.

a.Right-click the My Computer icon and choose the Properties command from the shortcut menu to open the System Properties dialog box.

b.Click the Network Identity tab, and then click the Properties button to open the Identity Change dialog box. Click the Workgroup option in the Affiliations option group and enter the name of the workgroup in the text box below (e.g. hy, note that the workgroup name must be set to one for all PCs).

Follow the same method to set up another computer.

Sharing of computer resources.

In Windows XP LAN, every software and hardware resource in the computer is called a network resource, and users can share software and hardware resources, and the shared resources can be accessed by other computers in the network. Below we take the folder.

for example. Hardware resources are shared similarly.

a.Right-click the folder to be shared and choose the Share command from the shortcut menu to open the Share Properties dialog box.

b.Click on the "Share this folder" option to set it up in detail in the following options:

Share Name: The name of the shared folder.

User Limit: This setting limits the maximum number of users who can use the shared folder.

Sharing permission setting: This setting makes the folder only available to users who have access. To set sharing permissions, click the Permissions button to open the permissions dialog box. In this dialog box, all the usernames that have access are displayed.

Everyone refers to all Internet users.

In the "Permissions for everyone" list, the current sharing permissions are listed, including full control, change, read permissions, etc., click "Allow" or "Deny" to set them. You can also click "Add" and press the bright knob to add other users or groups to set sharing permissions for the folder.

There should be no problem setting it up as above, good luck!

Hub Set Up LAN Method 2:

Think of your router as a hub.

hub) or switches, and no setup is required. You only need to connect the network cables of each access device to the LAN port of the router.

The hub is a multi-port device, and when the hub is the central device, even if one line in the network fails, it will not affect the work of other lines. It is used in star and tree network topologies with RJ45 interfaces.

Connected to each host, the hub can be divided into passive hub, active hub, and intelligent hub according to the processing method of the input signal.

Hub Set Up LAN Method 3:

If the router supports WDS bridging, you can omit 1 and 2 connections. Router B and C use WiFi to connect to Router A.