How to use one computer to control 50 other computers to access the Internet

1. What is certain is that the function you want to achieve can definitely be realized, but the effect of different price points is different. Here's a free one for you.

2. The router does NAT normally and is responsible for PC Internet access in the LAN. The hub switch is responsible for connecting PCs within the local area network.

3. If the router does not have DHCP function, you can access the Internet ** a DHCP server software, and DHCP server is recommended to automatically assign IP addresses to PCs in the LAN.

The incoming cable is connected to the router on the computer that is connected to the computer and the computer is installed with ISA ** for other computers. ISA can block QQ block**, block the web, limit traffic, etc.

The people of Flying Fish are too filthy, and a bunch of people in NND are gunslingers. I also bought it after watching the advertisement, and when I bought it, it blew to the sky, and it was all good. After buying it back, it dropped and crashed all day long.,All the QQ game numbers in the Internet café were stolen.,The customer also asked me to lose money.。。

Looking for a manufacturer, his technology is more garbage than me, and he doesn't give a return, two days ago, a thunderbolt split the Exans route, damn it even more annoying, the router is a rubber shell, almost caused a disaster, and now my Internet cafes are closed, I've called 315, ready to fight a lawsuit with Exans, this is not over, what I can do at the moment is to try my best to remind everyone to pay attention, the following are some of the Exans gunners: easy4me, renxl1900, cold salary Mochizuki, no quit color master, renxl1901, 3super,easy4me,More gunners to be further confirmed! Sooner or later, Flying Fish will go out of business

It is recommended that you use a router and a hub (preferably a switch) to network, and the IP address can be set to DHCP assignment, or you can specify it for each computer. Then install a network management software on your main computer and push P2P Terminator (relatively easy to set up and use).

One. The remote desktop function must be enabled on the controlled side. Add a remote connection user.

Two. The control terminal can be connected with a remote desktop and controlled by an IP address.

Controlled settings.

1 The remote desktop function should be enabled on the controlled side.

First, right-click on my computer. Select Properties.

2 Click: Remote bar first, and then under Remote Desktop, tick: Allow users to connect to this computer remotely.

3 Normally, the above two steps are sufficient, but it is also important to note that the user account remotely connected to this computer must contain a password, which means that the user who has the password can connect.

And one more: select the remote user and go in and have a look.

4 super administrators, already have the right to connect remotely, in fact, because the super administrator has the highest permissions, and many people's super administrator accounts are empty passwords, the system requires password verification for security, so you have to remember.

If you don't want to connect with a super admin account, see how to add a remote connection user.

3. Add a remote connection user.

1. Based on security and permissions, some people don't want to use a super administrator account to connect remotely to the desktop, so it's time to add users. Of course, if you still find it convenient for the super administrator, you can set a password for the super administrator.

1.First, right-click on my computer. Select: Manage.

3 Then add new users.

5 After pressing OK, you will see that the new user has been established successfully.

Click Add. 7 In general, here you can manually enter the username of the remote connection.

But for the sake of accuracy, I recommend not typing manually, but choosing from a list.

10 Press OK and return to the list of users to add remote connection. I also chose to connect to the user remotely.

Control side operation process.

1 When everything is in place, it doesn't take long for you to actually take control of another computer.

Click: Start - Programs - Attachments - Remote Desktop Connection.

2. In the pop-up dialog box, enter the IP address of the controlled end, and after 3 press OK, you can see the connection process.

4In fact, a similar window will appear soon.,The meaning of confirmation.,If you don't want to prompt every time.,Just tick the checkbox.。

5 The connection is successful, please enter the username and password, the new one just now is 123. Of course, it is also possible to use a superuser, provided that it is not an empty password.

The first problem is that wireless receivers don't use wires to connect to wireless routers.

Connect to the wireless router, directly through the wifi to find the name of the Zao Nayin router, and then connect and enter the password.

Most routers are connected to the router, and it's best to look at the router's setup manual, which will tell you the username and password. Enter the router's settings interface, and you will be able to set up the router's data, how to connect to the network, and so on.

b c computers are networked at the same time as long as they can connect to the router, I don't know if a is the same wireless receiver or wired, if it is a wired stool hall plugged in the lan port, wireless directly find the router to connect.

I don't know what it means for a computer to be the host, but normally all three computers are equal. Unless you use special software or the software that comes with the router you can set computer A as the host, but it is possible that when computer A is shut down, the router will disconnect the network of computer B. If you need to connect to the knowledge server, just set A to a fixed IP and let BC specify the IP!

If I understand correctly, the WLAN you are talking about is not the mobile chain broadband that everyone usually says, but a wireless network like that mobile CMCC.

If that's the case, then you can't use the router Dalingsun, the router is for broadband, and you can use the router to divert traffic if you have broadband access to your home.

Mobile CMCCs are used with a separate computer and a separate computer.

Wangha! I've gone into detail and I can't use a router for mobile CMCC. I've been using CMCC for more than two years, so I just knew.

The router picks up your cat, the port that was originally plugged into the A computer, the computer ABC plugged into the router's 1 2 3 4 mouth spring trembling at any one In the rough IP address to get set to the automatic stool to get it, you can get it by hand.