The choice of table tennis rubber, how to choose table tennis racket rubber?

Forehand: Preferred Crazy Three. Because the crazy three is the right glove glue.

Moreover, its super excellent feel after pouring glue, and the extremely lethal performance when attacking, is also the best choice for forehand glue. Similar to Crazy Three is Tianji 3, Tianji 3 is softer and stickier in rubber treatment, so the ball speed is not as fast as Crazy Three, but its control and spin are also better than Crazy Three.

Secondly, 729-08es. This piece of rubber is now used by many people to replace Kurumi. The general reaction is that the performance feel is not inferior to the crazy three, but the deterrent power of the offense is slightly inferior to the crazy three.

But because it does not need to be potted, its service life is much more than that of Crazy Three. Affordable.

Finally, the evaluation of the 729-5 is mixed, but its overall performance is a distance worse than that of the 729-08. If you don't like the 729-08, you can consider the 729-40s, which is also a bit stronger than the 729-5.

Backhand: If you are crossboarded, you can choose a two-sided mad three. Increase the aggressiveness of the backhand. But the two-faced mad three will be heavier. The landlord has to consider his swing speed and forearm strength.

There are more CJ8000 for the backhand, because the CJ8000 sponge is softer, the rubber is thin, and it is easy to hold the ball, so it feels good to use it on the backhand. I often see some professional team members use CJ8000 for backhand. Super value for money.

If you feel that the backhand is slow, the bounce is more, and the ball is less controlled, you can choose the 729 series, such as -5 and -2, but it is generally not recommended to use the 729 rubber for the backhand. Because of its thick rubber, it is not easy to hold the ball without force on the backhand.

The backhand can also choose the Focus Series, Shoot Leo's AK47, and Milky Way's Moon Rubber. These are all good.

Hand typed more than 500 words, I hope it can help you. If you still have questions, we hi communication. Hehe.

The arrangement of rubber and sponge can greatly affect the performance of the baseplate, so that the overall performance of the racket shows different characteristics. Therefore, after selecting the base plate, it is necessary to adjust its performance through the configuration of rubber and sponge to achieve the best state. Commonly used rubber sheets are as follows:

Positive glue is a kind of granular glue with a high degree of vulcanization, large particles and a height in between. The particles of positive glue are hard and lack stickiness, and are usually used with a softer sponge. In order to increase the ability of the positive rubber to make rotation, each brand has made a fine pattern on the top of the positive rubber particles.

The positive glue returns the ball quickly, can create a certain rotation, and is suitable for use by fast attackers near the table. The straight plate is glued and the fast attack method is the traditional way of playing in my country.

Raw rubber is a kind of positive rubber with a low degree of vulcanization, usually with smaller particles and a height in between. Raw rubber granules are soft and have poor ability to make rotation, so they are usually used with a slightly thinner sponge. The raw rubber hits the ball quickly, and the return ball sinks, which can produce a certain "counter-spin" effect.

It is often used as a backhand by players who combine fast break with arc play or slicing play.

Long glue is a kind of granular glue that is soft and highly in between. The long rubber return speed is slower, but it can produce a completely opposite rotation of the regular rubber, and it can use the opponent's power and rotation to produce a very rotating return when cutting the curved ball. It is usually used by odd ball players or as a backhand rubber for chippers.

Reverse adhesive is the most commonly used type of rubber and is usually used with a stiffer and thicker sponge. The counter-rubber shot has a lot of power and a strong spin. There are players who choose it for all types of play.

Anti-arc adhesive is a thick, hard, elastic, somewhat astringent anti-rubber skin, usually used with a loose sponge. It has a strong cushioning effect and can effectively weaken the effect of strong rotating balls. It is often used to control the opponent's curveball, but the power and spin of the return ball are not strong.

I've also had your choice of confusion like this, I've used.

In the end, I chose the Hurricane 3+CJ8000 all-round.

more, choose the right rubber according to your actual situation.

Definitely choose Crazy 3 and CJ8000 Although it is not a perfect match, it is considered advanced in your choice

Forehand mad three, backhand shot Leo CJ8000 internal energy type.

729 anti-rubber sleeve glue 729-5 and red double ecstasy three.

Straight and transverse? What's the way to play?

When choosing a table tennis racket, each person needs to decide which racket is suitable for them according to their own playing characteristics, especially the choice of rubber, the following is a brief introduction to the characteristics of three different performance rubber:

1.Sponge glue: Golfers who focus on speed will use this type of racket more often, especially the Chinese-style straight board attack is the most representative. This type of racket will have a slight downspin when it is hit, but it is not as strong as the reverse rubber in terms of pulling the ball and creating spin.

2.Reverse sponge glue: Because the reverse adhesive itself has a large stickiness, and friction.

It is strong and easy to make spins, so there are many users of arc type players; However, there are also some use of the reverse sticker fast attack, mainly to enhance the spin quality in serving and rubbing.

3.Long glue.

In general, this kind of rubber is not easy to actively create spin, mainly relying on the different spins of the incoming ball to produce opposite spins, and the users are mainly golfers with variable playing styles. They usually convert rubber with different properties to hit the ball to increase the variation in spin, speed.

How to stick the rubber of a table tennis racket.

1.First, put the rubber on the ball board and measure the position to be glued, and align the label with the handle to be even.

2. Brush the glue on the rubber and the ball board respectively, brush the rubber on the side of the sponge, more than 3 times, and brush the ball board more than 2 times.

3. Paste the rubber from the handle to the head.

4. Roll to the direction of the head of the beat with a round roll, and then roll back to the direction of the handle, pay attention not to too much force, and compact it.

5. After gluing the glue, use large scissors to cut from the bottom of one side of the board until the excess part of the glue is removed.

6. Paste edge protection on the edge of the board, the purpose is to play an aesthetic role, and the second is to protect the board.

The table tennis racket rubber should be equipped with astringent rubber according to their own playing style, and the hardness should be slightly higher, so that the ball is shallow and the ball speed is fast.

The curved ball is played with sticky rubber, which is deep and frictional, and it is easy to pull the ball.

The choice of table tennis rubber should be based on your own playing style, choose the rubber that suits your needs, and the same rubber also has a difference in rotation speed and strength, which should be determined according to the actual situation.

In fact, it is very simple to choose a table tennis racket rubber, you don't need to buy a good racket at the beginning, you just need to buy a cheapest racket, of course, you have to buy a toy racket, whether it is a brand, dozens of dollars can be. When you slowly have a certain understanding of table tennis, and have your own ideas about the skills you usually learn, you can choose the right rubber according to your own playing style, such as sticky rubber and astringent rubber, the degree of rubber and so on. Of course, the bottom plate of the table tennis racket is also a choice, and different playing styles have different requirements for the bottom plate!!

1. Positive glue.

The particles of the positive rubber are facing outward, the diameter and height of the particles are basically the same, the elasticity is good, the ball is stable, and it is not easy to eat the opponent's rotation.

2. Raw rubber. Raw rubber is similar to positive rubber in specifications, but the glue content of colloidal is larger than that of positive rubber, so the particles are softer and the elasticity is relatively larger. The raw rubber hitting ball is fast, the heavy hit is more stable, the light hitting stability is poor, and the hitting is heavier.

3. Long glue. The particles of the long rubber are softer, the diameter of the particles is less than the length, the long rubber generally can not actively make rotation, but it has the characteristics of changing the rotation, and the rotation of the ball can change to the opposite direction, with the help of the rotation of the ball, the more the ball turns back to the ball, the more it will rotate.

4. Anti-glue. The reverse rubber particles are inward, the rubber has good elasticity, stable hitting and easy control, and the ability to actively create spin is the strongest. The difference between adhesive rubber and astringent rubber is that there is a cover rubber layer on the surface of the adhesive sleeve, and it will feel sticky when touched by hand.

5. Anti-arc adhesive.

The anti-arc adhesive particles are inward, the surface is smooth, and the elasticity is very small, and it often cooperates with a thick sponge to counteract the rotation and force of the arc ball.

2. Look at the bottom plate, the bottom plate is common with five layers of pure wood, seven layers of pure wood, carbon bottom plate, etc., beginners should choose five layers of pure wood base plate when practicing ball control.

3. Choose rubber and sponge, beginners are suitable to use reverse glue, positive rubber and long rubber have high requirements for the ball sense and feel of the golfer, so the reverse rubber is suitable for basic scholars, and the sponge is a little soft, which can maintain good ball control ability.

5. Five-star, suitable for more than 2 years of age or often participate in small competitions.

When we ask how to choose a table tennis racket, we must first popularize the relevant common sense of table tennis racket, so that we know how to choose a table tennis racket to best satisfy ourselves. Table tennis racket is divided into three components: base, rubber, sponge, how to optimize the combination of these three parts will directly affect the quality of the table tennis racket, talk about the choice of table tennis racket rubber.

The general categories of table tennis racket rubber mainly include positive rubber, reverse rubber, raw rubber, long rubber, and arc-proof rubber.

Table tennis racket rubber: positive glue.

Positive rubber can also be called "granular rubber", which is mainly a common type of straight board fast attack type player. The characteristics of positive rubber are: good elasticity, fast speed, stable hitting, no rotation, suitable for fast attack near the platform.

Positive glue technology recommendation - flexible wrist movements, insufficient strength of the upper arm and waist and abdomen, choose from the front to win with speed.

Table tennis racket rubber: reverse glue.

Anti-glue is the first choice for beginners to choose rubber, and the characteristics of anti-glue are: strong spin force, stable batting, and easy control. For professional players, the anti-glue can also be conjured into a variety of anti-glue sponges to choose, such as strong adhesive rubber.

Anti-rubber sponge rubber is the most commonly used rubber for straight and horizontal shooting players.

Anti-glue technology is recommended - arc circle type or arc circle combined with fast attack type play.

Table tennis racket rubber: raw rubber.

Figuratively speaking, raw rubber is a rubber with particles upwards and a diameter greater than the height. The characteristics of raw rubber are: sinking of the ball, weak spin of the ball, and easy ball control.

In a sense, the role of raw rubber is a "catalyst" or "matching", and now many players will use the combination of forehand backhand (arc circle) and backhand raw rubber (fast dial and swing short), especially some female players.

Raw rubber technology recommendation - horizontal shooting on both sides of the player.

Table tennis racket rubber: long rubber.

It can be said that long glue is a kind of rubber sponge, and in detail, it is a kind of rubber sponge that is glued and covered with a thin sponge. Its effect is great, but the error rate is also very large, not only easy to cause opponents to make mistakes, but also sometimes difficult to master, table tennis ornamentation and entertainment greatly reduced. In May 1998, the International Table Tennis Federation held a council meeting in Durban, South Africa to make a decision on prohibiting the use of long rubber, and the Chinese Table Tennis Association has already clearly stipulated that no long rubber shall be used in juvenile competitions.

Table tennis racket rubber: anti-arc rubber.

The birth of the anti-arc rubber is specially designed to deal with the curve ball, which is characterized by: the paddle surface is non-sticky, the surface is smooth and slightly astringent, the ball runs slowly, the arc is short, and the sinking and fluttering after landing on the stage makes it difficult for the opponent to judge according to the convention, and it is especially effective for dealing with the curve ball.

When we choose a table tennis racket, we should pay attention to the choice of rubber for the table tennis racket, but also pay attention to the choice of sponge.

It is mainly decided according to your personal technical characteristics: if you play fast, use positive glue; If the arc circle is combined with the fast attack method, the front side is used with reverse glue, and the reverse side is used with raw rubber; Two-sided arc circle (straight plate) playing, both sides with reverse glue; The two-sided arc circle (horizontal version) playing method is also used to reverse glue on both sides; If you play with a horizontal plate chipping ball, use reverse glue on one side and raw rubber on one side, or reverse glue on one side and long glue on the other.

The rubber of the table tennis racket can be selected positive rubber, reverse rubber, raw rubber, anti-arc rubber, each rubber of Xiangxian is according to different playing styles and corresponding to the configuration of the spring banquet cong. Positive rubber rubber is suitable for straight board fast attack type play, which is characterized by good elasticity, fast speed, and stable hitting, which is very suitable for fast attack near the table; The anti-rubber rubber is suitable for arc circle play, or arc circle combined with fast attack play, which is characterized by strong rotation force when hitting the ball, stable hitting and easy control.

Raw rubber rubber is suitable for horizontal shooting two-sided attack, which is characterized by sinking of the ball, weak rotation of the ball, and it is relatively easy to control the ball; The anti-arc rubber is mainly used to deal with the curved ball, which is characterized by the fact that the paddle surface is not sticky, indicating that it is relatively smooth, and there will be a slight astringency, and the arc of the ball is shorter, and the sinking and drifting after landing on the stage will cause the opponent to be difficult to judge.

When choosing a table tennis racket, in addition to choosing the rubber of the table tennis racket according to the personal playing style, we should also pay attention to the selection of sponge and bottom plate, which are indispensable for the table tennis racket, and the lack of one will directly affect the quality and feel of the racket.