-
To be good or crazy 3 in the forehand disadvantage is that you must be glued 729--8 is indeed not to pot, but the performance is much worse than mad 3 If you must not pour glue and ensure the quality of the forehand It is better to use the arrogant z I'm sorry I haven't asked you what board to play If you provide these, you can also adjust If you don't understand this question, you can ask, if you are satisfied, remember that if there are other questions, click to ask me for help, it is not easy to answer the question, please understand, thank you.
-
Recommend Neo Crazy Three.,It's a bottom-based crazy three.,It's a rubber that has been filled.,Rubber in the inorganic era.,With the feel of glue.,I've been using it.。
-
It's up to you! If I don't feel comfortable playing for two days, I'll just change it.
-
Dornic's performance is good, but if you just get started and can't control it, it's almost the same on both sides.
-
I've used 729-08es, no glue, acceptable performance, but compared to Neo's mad three, I feel that the power is divergent, and the arc is not enough to thief.
If the backhand is not bad for money, there is no doubt that T64 is the best, and you will know if you have played it. Red V,I've tried big Z.,It's all good.,But after using T64, there's a feeling of frugality.,It's said that only Mica 4 can match it.,But I haven't used it.,It's hard to say.。
-
Most of the forehands are hurricane. Or Tianji.
-
The national set is recommended to use Hurricane 3 or NEO Hurricane 3, the coat can be folded T05, and the arrogant silver V is also good.
-
It's definitely not that you don't want to fill glue, it's up to you, it's just that it's elastic.
-
<> long glue. The colloid is very soft, and the original particle height is in between, so it is called long-toothed rubber, also known as high glue. The Chinese Table Tennis Association has long clearly stipulated junior table tennis.
The competition shall not use celery gum. Long glue is disabled for the following reasons:
1. The rubber particles are slender and have little supporting force, so the particles are easy to tilt when they are subjected to the pressure of the incoming ball;
2. The longer the force, the stronger the rotation, the smaller the force, the weaker the rotation, and the reverse rubber and the short tooth rubber in the chipping performance is just the opposite of the potato segment, with this rubber to play the ball, not only the opponent makes many mistakes, but also their own side is not easy to grasp, which greatly reduces the ornamental and entertaining nature of table tennis;
3. The long glue is difficult to master, and it is easy to cause wrong stereotypes if you are careless.
-
The classification of the rubber used in table tennis norms: positive rubber, reverse rubber and arc resistant rubber, etc.
1. Advantages and disadvantages of positive rubber: This rubber not only has good stability when hitting the ball, but also has a large force, which is easy to play the role of sponge and bottom plate, which is conducive to improving the speed and strength of hitting the ball. However, because the glue content of the colloid is not very large, the particles are relatively hard and lack of viscosity, so it is inferior to the reverse adhesive in the performance of manufacturing rotation.
2. Advantages and disadvantages of reverse adhesive rubber: reverse adhesive rubber particles are attached to the sponge inward. Due to the good viscosity and large friction coefficient, it is particularly conducive to the manufacture of rotation, and the stability of the return ball is also good.
Anti-adhesive rubber is a common mainstream equipment used by athletes of various playing styles in the world table tennis arena. The reverse glue can also be subdivided into arc circle type and fast attack arc circle type according to the degree of hard denier.
3. Advantages and disadvantages of anti-arc rubber: the rubber of anti-arc ring rubber is thicker, the rubber particles are shorter, the elasticity is relatively small, and the viscosity is also very small. This rubber is often used in conjunction with a soft sponge of about 2.0 mm, which is conducive to eliminating the strong upspin of the curved ball.
-
The types of rubber of table tennis rackets are divided into positive rubber, reverse rubber, raw rubber, long rubber, and arc resistant rubber. Table tennis rubber generally has two ways: positive paste and reverse paste, and the particles are called positive sticker rubber outward, and long rubber, raw rubber and positive rubber all belong to this; The inward appearance of the particles is called reverse glue, which is mainly the commonly used anti-glue and anti-arc rubber.
-
The colloid of long rubber is very soft, and the original particle height is in between, so it is called long tooth rubber, also known as high glue. The Chinese Table Tennis Association has long stipulated that no long glue shall be used in juvenile table tennis competitions. Long glue is disabled for the following reasons:
1. The rubber particles are slender and have little supporting force, so the particles are easy to tilt when they are subjected to the pressure of the incoming ball;
2. The longer the force, the stronger the rotation, the smaller the force, the weaker the rotation and the reverse rubber and the short-toothed rubber in the chipping performance of the ball just opposite the search type, with this rubber to play the leaky ball, not only the opponent made many mistakes, but also their own side is not easy to grasp, greatly reducing the ornamental and entertaining nature of table tennis;
3. It is difficult to master the long glue, and it is easy to cause wrong stereotyping if you are not careful.
-
The reason for the slippage of table tennis: in a rainy and humid environment, the surface of the rubber such as the rubber will appear and condense very fine water droplets, and the lubricant is added between the rubber particles and the ball, so it is easy to slip when rubbing the ball, and it is easy to go to the net.
Solution: Use the special quick-drying water for table tennis rackets to spray on the surface of the rubber particles, so that the water will quickly volatilize away with the dry water of Suhe Zhengwang; If there is no quick-drying water, apply chalk to the surface of the pellets to absorb the water.
For the first time, the team competition system was introduced in the table tennis competition of the Beijing Olympic Games, and many rules were implemented for the first time. The reporter interviewed the relevant person in charge of the Beijing Olympic Table Tennis Competition Committee, who gave a detailed explanation of the table tennis team competition system of the Beijing Olympic Games. >>>More
Adjust the angle of the face. The net is slightly straight, and the ** is slightly flat.
There is no specific practice method, and the anti-rotation attack is a combination of bits and pieces in the usual training, but there is still a theory. >>>More
To tell the truth, 729-08 is difficult to grasp in the backhand, the 729-08 used by Liu Shiwen in the forehand of the national team, its performance is as follows: the rubber of the 729-08 set of rubber inherits the unique viscous characteristics of 729, with a unique particle structure, the in-stage bounce and manufacturing rotation performance is unparalleled, and the unique formula design of the sponge of the 729-08 set of rubber has excellent resilience and strong ball speed, which greatly improves the power of the COSCO platform to pull and attack. At the same time, the attenuation of the sponge during the hitting process is minimized, so that the power performance and stability in the holding can reach the extreme, and the forehand attack power is extremely high. >>>More
Hello this golfer, I also play arc circles, share my experience I hope it will help you....In fact, to make a curved ball, of course, it depends on rubber friction (astringent glue relies on a soft sponge to eat the ball)....The reason for the arc out of bounds is because the racket rubs too much upward, but the swing friction is too low and the ball will not reach the net. In fact, the correct arc posture must first achieve the center of gravity of the body forward (slightly press the lower body)....Hold the racket about 45 degrees and pull forward (don't pick up, this is a posture problem, many people start to deform the gesture after pulling the first three boards, so the correct posture must be proficient, and it will be very helpful to swing the racket every day to practice pulling the ball 50 to 100 times)....When the arc is pulled, the paddle is tilted forward, and the force is exerted when it touches the ball. You can only hear the sound of the rubber rubbing the ball and there is no sound of the bottom plate loading, and the arc ball pulled out in this way is spinning and rushing at the bottom. >>>More