Sapphire graphics card to play games with a blurred screen, and play games with a blurred screen

Are you sure the driver is installed correctly?

If you overclock, try restoring the factory clock.

But it's not, then it's a graphics card problem, contact customer service.

First of all, you need to confirm whether it is a hardware problem with the graphics card, and the only way is to try it on someone else's computer, but it is not a hardware problem, and then take the following methods. My graphics card is in the same situation as yours, but it's been fixed.

1. After cleaning, if it still doesn't work, the landlord has not emptied or restored the BIOS, if it is to put the "cas".

latency

time" is set to 2, "active."

toprecharge

delay" to 5," dram

ras#to

cas delay" to 2,"dram

ras precharge" to 2, save it and go to Windows. (Note: Some BIOS have SDRAM in it).

2.For example, if your CPU frequency is 200, then set the memory to DDR400 in the BIOS, if the CPU is 166, then set the memory to 333, and so on

3.If it still hasn't been solved, you need to consider whether it is the hardware of the motherboard.

4.There are also motherboard drivers, heat dissipation, voltage, and so on

I have encountered 2 times of the screen, once because of the low voltage, and then it was good to change to a place with normal voltage.

Another time is that after restoring the BIOS to the default settings, the screen caused by the memory, of course, there are problems such as loose memory and loose graphics card.

Generally speaking, if it is just a game screen, the problem will not be very big, and the graphics card proves that there is no problem, which is the above reasons.

If you want to save money, try these 3 steps. If you're afraid of trouble, change it, OK1Check that the screws on the graphics card are loose.

Swing from side to side to see if it loosens.

2.Check the graphics card to check the slot, take out the graphics card and wipe the gold finger (yellow part) around it with an eraser.

3.Check the driver, it is recommended to use the original driver from the installation (or from the system).

If you've tried all of the above.

The construction of the banquet and the discussion of the bridge should be repaired (or replaced).

Graphics card screen. A little bit of blue?

The blurred screen is caused by the overheating of the BGA packaging chip of the graphics card caused by long-term overheating or vibration of the machine, which is solved by professional BGA packaging and welding equipment and technology plus welding or replacing the graphics card.

Hello landlord. If the system is upgraded, the graphics card needs to be upgraded as well.

If you have this situation, it may be a problem with the graphics card, or the driver.

Other situations. 1. The drive file is corrupted. Reinstall Microsoft WHQL certified drivers.

Open Computer Manager - Computer Clinic - Hardware Problems - Flower Screen.

2.Excessive temperature of the chipset of the graphics card, processor, memory, and even the motherboard can also cause a blurred screen.

3.ACP PCI-E for power supplies and motherboards

16x power supply, if the graphics card does not get sufficient, pure current, there is also a possibility of a splash screen.

4 memory modules. You can take an eraser and wipe it off.

5. Incomplete anti-virus, there are viruses, Trojans, malicious plug-ins (using anti-virus software, full scan and custom scanning)!

7. There are new vulnerabilities in the system waiting to be installed.

There are many kinds of flower screens.

1: The screen is blurred when booting up, and the screen is not blurred when entering the system, and the driver cannot be loaded when the graphics card is missing.

Answer: Video memory or GPU virtual soldering, you need to go to the chip-level repair shop to do a BGA soldering station treatment, 50-100 yuan.

2: The screen is blurred after playing the game for a period of time.

Answer: If the heat dissipation fails, it is recommended to clean it up (don't use the washing machine) or replace it with a new radiator, and the new radiator is 20-300.

3: Flower screen from beginning to end, but it does not affect the use very much.

Answer: The original defective product generally does not occur on the old graphics card.

Which situation are you? It is not excluded that there is a fourth.

Check the heat dissipation, clean up the dust, and reapply the silicone grease.

If it doesn't work, reduce the frequency. Especially video memory.

This state seems to be a problem with the memory.

Make sure that the driver is installed correctly.

The graphics card you just replaced.

That should be if the graphics card driver is not installed correctly, try to update your graphics card driver with the driver wizard.

Driver, graphics card driver.

It's obviously a problem with the graphics driver.,The landlord just update it.。

Hello, this may be caused by abnormal hardware-monitor or graphics card drivers. You can try the following solutions:

Solution 1: Plug and unplug the monitor cable, press the auto auto-adjust button a few times, set the best resolution and test;

Solution 2: Update the driver of the cavity digital graphics card.