Figure POLY PVC and Cast figure comparison problem

Resin stuff, it is recommended to think twice, not that it is bad, it is very good!! However, there are very few survivors who can survive the violent "fast" delivery of domestic express delivery. . .

I ordered a resin figure from Japan, and when I arrived, 7 out of 10 survived, and after the domestic delivery, 7 survived, and only 1 survived in the end...

Japanese genuine resin figures, about 400 yuan, are generally unpainted, and need to be colored and assembled by themselves, which few players can do very well.

If you play by yourself, you can collect the PVC figures. After all, you have to be able to get it all in your hands before you can talk about anything else! If you want to make something better, buy the Japanese version.

Although it is also made by Chinese processing plants, the quality of things made with supervision and without supervision is different!

The poly quality of 400 is usually something that some people are interested in, make it themselves by hand and then sell it. Often, there may be details that are not done very well.

Although PVC is mass-produced, the details and quality can be guaranteed, and generally Japanese PVC figure factories in China are very mature in technology.

Things are okay, but they are all white molds, they have to be colored by themselves, they have to be technical, and the PVC ones are all finished products.

The material is PVC, and PVC (polyvinyl chloride) decomposes when heated at high temperatures, releasing HCl gas. PVC material is also very serious in outdoor air. PVC will add stabilizers during production, but stabilizers are non-toxic and toxic, and only toxic stabilizers such as lead salts are added to produce hidden dangers.

The material generally used in PVC figurines is "PVC", that is, polyvinyl chloride.

It is one of the largest plastic products in the world, cheap and widely used, PVC resin is a white or light yellow powder, which cannot be used alone and must be modified. PVC is an amorphous white powder with a small degree of branching and poor stability to light and heat.

Different additives can be added according to different uses, and PVC plastics can present different physical properties and mechanical properties. Adding an appropriate amount of plasticizer to PVC resin can be made into a variety of hard, soft and transparent products.

The material of the PVC figure is PVC (polyvinyl chloride).

PVC itself is the name of the material, which is polyvinyl chloride.

PVC doesn't know that it will soften after a long time anyway.

PVC is a kind of material for making figures, buttons, and the like.

I have an auxiliary base frame for button eggs, which is a pvc one.

My mom said it was a knick-knack with a base.

Also known as a PVC humanoid, it is commonly known as a "figure (PF)", but it is actually completely different from a figure (GK), and it is also known as "PVC finished product" or "PVC painted finished product".

To put it simply, it is a humanoid work made of PVC (polyvinylchloride (PVC)).

Europe and the United States are mostly called soft rubber materials. The uncoated components of soft rubber materials (referred to as soft rubber components) are different from the first category, the material of this component is soft rubber, which is cheap, and the same shape can be bought for less money. When it comes to retrofitting, there is more freedom than resin.

Therefore, most of the figures are made by most of the figurines now, and the figurines circulating on the market are PVC figurines.

PVC Advantages:

PVC** is inexpensive, and the same shape can be bought for less money. When it comes to retrofitting, there is more freedom than resin.

PVC will age naturally, and the figure may have a lifespan of 7 to 10 years (not to be completely broken, but to color, movability and quality).

PVC disadvantages: GK is used for a lot longer than PVC.

GK is a model that will not be mass-produced, because a mold will be scrapped if it fills more than a dozen sets, so it is generally more expensive. Generally, the white mold needs to be polished, assembled, and colored by the buyer, which is much more difficult than the general model production. Because the material of GK is inconvenient to transport, it is still very difficult to buy the original Japanese GK for domestic players.

PVC** is inexpensive, and the same shape can be bought for less money. When it comes to retrofitting, there is more freedom than resin.

PVC will age naturally, and our figurines may only have a lifespan of 7 to 10 years (not completely broken, but color, movability and quality).

The time of GK is much longer than that of PVC... If you haven't counted the specifics, you can take a look at this post.

Strictly speaking, PVC is not called a figure, it is called a doll, PVC is a cheap plastic, and the same shape can be bought for less money. Although the degree of freedom is a little higher than that of resin figurines, PVC figurines will age and have a less long service life than resin figurines. The resin figure has a certain degree of difficulty in the process of opening the mold, and it is also high, but due to the strong plasticity of the resin material, it is more suitable for expressing very detailed details and characters.

However, now everyone calls PVC also a figure, and the masses have changed the industry identity. So now resin material and PVC material are called figures.

I guess it's GK.

GK (twigs) last longer than PVC (the main ingredient is plastic?). The collection time is long, and the GK is hard, and the figure in the standard sense refers to the GK, which is generally not produced in large quantities, and the GK is more brittle than PVC, so it is easy to cause damage during transportation, and it is recommended to buy it as close to the store as possible from your city.

Here's a look at the gk bar** You can take a look Remember to remove the whitespace.

The number of GKs is very small, and most of them are white molds, which require players to polish, assemble and color by themselves, and require certain art skills, materials, and technical support.

PVC is a mass production figure, produced by the factory assembly line, there must be some gaps between the reduction degree and GK, after all, it is a mass product, and the details must not be compared with GK, but in general, the quality of PVC figures can still meet the needs of consumers, and GK, most of the people we can buy in the mainland are turned molds, because the number of original GK white molds in Japan is scarce, and then ** is very expensive, the original GK is generally only sold a few or dozens at a time, **thousands of RMB....

8 to 10 years is not bad.

It's just that if you don't torture it, it will take longer, and 4 or 50 years is not impossible.

But I don't know if the paint will peel off.

Well, keep out of the sun and keep in a cool, dry place.

It's right to put it in the box and then put it in the cabinet, which can slow down aging to a great extent, but people will get old, and it's normal for the figure to be a little worn out for a long time, you can open the box and put it in the glass cabinet for easy appreciation, and it's always in the box, and it feels obedient = =

Usually try not to touch the body with your hands.,If the dust falls and clean it up, the life is limited.,The figure will also age.,That's no way.,But the time is not short.,7-8 years is definitely no problem.。

The landlord can take a look at this, and it should all be understood:

1. The meaning is different.

PVC: It is a polymer polymerized under the action of light and heat according to the reaction mechanism of free radical polymerization.

GK figure: refers to the unpainted resin mold set, which is a type of collectible model.

2. The materials are different.

PVC: The material is soft rubber.

GK figures: The main material is resin.

3. The characteristics are different.

PVC: It is a white powder with an amorphous structure and a small degree of branching.

GK figure: The gray mold is designed by the stylist, and then the mold is opened to make the white mold, which has poor stability to light and heat.

4. Difficulty varies.

PVC: The details are relatively simple, and some shapes with complex structures cannot be made, so the degree of freedom of modification is greater.

GK figures: buyers need to polish, assemble, color and other operations by themselves, which is much more difficult than general model making.

5. Different uses.

PVC: in building materials, industrial products, daily necessities, artificial leather, packaging films, foam materials, sealing materials, fibers, etc.

GK figures: suitable for expressing very detailed parts and characters.

In terms of anti-aging, resin, that is, the material we often say GK is harder than PVC, more wear-resistant and heat-resistant than PVC, and more durable for preservation, so of course it is more durable than PVC, how can their anti-aging be almost the same.

PVC is a cheap material that is easy to shape and easy to attach color, because the material is soft, so it has become a mass-produced material, PVC can not be called a figure, the figure is just the name of resin GK, but the Chinese themselves like to call it, resin GK products are basically completed by hand-coloring painting and engraving, so the amount is very small, and ** is much more expensive, the most important thing is that the texture is much better.

In terms of collection, it must be GK, generally many GK are works made by master humanoids or designers, and the amount is very small, of course, the collection value is large.

Transfer someone else's].

Cast resin.

Commonly known as PU resin, CAST resin is actually Japan's HEI-CAST resin, which is the abbreviation of non-foaming polyurethane resin.

The color is white, beige, ivory white, etc. (according to the number of cast resin, there will be different, such as 8012 beige, 8014 white, 8017 ivory white, as well as transparent color, or other colors specially modulated), the weight is relatively light, the plasticity is also very good, and the material with the best performance in details.

However, it is more expensive than other materials, equivalent to more than 300 yuan (one kilogram each for A and B, and the total weight is two kilograms). The figure made of cast resin is relatively easy to process, and the figure made of cast resin is mainly the original.

The material of the Japanese version of the figure is generally marked as cold resin cast kit, cold refers to the forming process - cold forming, that is, the material does not need to be heated and melted before entering the mold. Other plastics (e.g. PVC ABS) must be heated and melted before they can be injection molded. resin is resin, and kit refers to kit.

So the translation is the meaning of cold-formed cast resin kit.

Polystone polystone powder resin.

A material made by mixing resin with stone powder, a type of cold resin. The price is cheap, less than 1 3 of the price of cast resin, and the English name is poly stone, which is the main material for the early completion of the humanoid shape. Basically, it is not suitable for hand-made materials for figure enthusiasts, and it is the most unsuitable material for GK models, which is impact-resistant, heat-resistant, hard, heavy, not easy to cut, and has poor plasticity.

The color can be changed by adding toner, which is heavier and brittle (because of the hard work) and very easy to break.

Abbreviation for PVCPOLYVINYLCHLORIDE. That is, polyvinyl chloride. Europe and the United States are mostly called soft rubber materials.

The difference between the uncoated components of soft rubber material (referred to as soft rubber components) and the first category is that the material of this component is soft rubber, which is cheap, and the same shape can be bought for less money, and in terms of modification, it has more freedom than resin.

Summary of the above:1Japan's HEI-CAST resin is more expensive, light in weight and good in plasticity.

Not suitable for newbies. Abbreviation. That is, polyvinyl chloride.

The material of this component is soft rubber, which is inexpensive and has a large degree of freedom in terms of modification. It can also be used as a pouring mold. 3.

Stone powder clay is more suitable for novices, and it is also easier to operate and cheaper.

The resin is used to pour molds, and you can use oil sludge, or stone powder. It seems to be called this name.

Stone powder clay is more suitable for novices.

Finely carved hard clay (not ordinary clay) is also easier to operate + cheaper, but it is not very suitable for Japanese figure modeling, more suitable for European and American systems, monsters and the like (easier to texture, not easy to smooth).

Stone powder clay (as well as various model modeling tools) can be purchased at **. A small scale figure recommends the brand crafty.