How to Solve the Network Lag Caused by the Router?

1. Restart the router at home regularlyIn this regard, everyone must often ignore it, so the router at home basically runs continuously 24 hours a dayIn fact, the machine needs to rest like a human after working for a long time, the router will cache a lot of data, which will occupy a lot of memory in the router, which will cause the wireless network to slow down. 2. After setting the speed limit and entering the management page, the basic situation of wifi is displayed here. We can intuitively see which devices are connected to the wifi and can manage them accordingly.

For example, let's take a device as an example, select rate limit management, and after clicking to enter, we can carry out a better management of this device, such as limiting the upload speed, or deactivating it. 3. Set a complex passwordThe speed of home wifi is related to the number of people who use it at the same time, so it is important to set a strong password to ensure that only people who know the password can use your network. Numbers, uppercase letters, lowercase letters, special symbols, 4 categories of minimum choice of 3 categories password length as long as possible, generally greater than 7 digits is best to use random strings, do not use the string to change the password regularly, generally two months.

4. Upgrading the FirmwareAlthough upgrading your router's firmware is an annoying and time-consuming task However, if you have a very old version of your router, updating the firmware can ensure that your router software is in the best and most efficient condition. The upgrade is to upgrade the router software (firmware)** to the local computer.

Heating is caused by or IP conflicts or firewalls.

Computer Mobile Phone Professional IP Modification Solution Steps:

It is possible to change the local IP address to another city by using IP** software.

Select the city you want to modify.

The connection is successful and you can switch.

There are many lines and the speed is fast.

It's particularly simple and convenient.

2.Install it all on your computer phone.

1. Router may slow down over time for several reasons:

2.The router is running for too long and has internal overheating;

3.The router cache is already occupied.

4. Line problems, such as unstable network cables, poor network cable quality, wrong line sequence, etc.

5. Router Maintenance: Any person or device that works endlessly can also cause problems with wireless routers.

The same is true, so it's best to disconnect the power supply every once in a while, turn off the wireless router, and let it rest for a while;

6.When no one uses it at night, you can turn off the router regularly, which is conducive to the maintenance of the router and improves its service life;

7.Clean the dust off your router by every summer. If the device is still under warranty, you can use a hair dryer to simply clean some of the heat dissipation holes on the router. If your router is out of warranty, take it apart and clean it up.

8. Over time, the router may slow down for several reasons: the router runs for too long and overheats internally; The router cache is already occupied. Line problems, such as unstable network cables, poor network cable quality, and incorrect line sequence.

9. Any person or device, endless work, can also cause problems, and the same goes for wireless routers, so it's best to disconnect the power supply every once in a while, turn off the wireless router, and let it rest for a while;When no one uses it at night, you can turn off the router regularly, which is conducive to the maintenance of the router and improves its service life;

10. Clean up the dust on the router before summer every year. If the device is still under warranty, you can use a hair dryer to simply clean some of the heat dissipation holes on the router. If your router is out of warranty, take it apart and clean it up.

11. Other information: The network speed is very slow.

caused by infection.

12. This situation often appears in Internet Explorer, in the lower left box of the Internet Explorer interface: the web page is being opened, but there is no response for a long time. Check out Task Manager.

(Go to the method and hover over the taskbar.

, right-click - Task Manager - Processes) to view CPU usage. If it's 100%, you definitely have a virus that makes running other programs a pain. This is to find out which process is greedily consuming CPU resources.

This is because there is too much cache garbage inside the router, and the network speed slows down due to overload, so you can turn off the router when you are not using it, so as to remove the cache garbage.

It may be that it has been used for too long, or it may be because there is a certain problem with the router, or it may be because there are too many connected mobile phones, so this situation will be caused.

It may be that the service life of the router is up, and see if the router is full of dust and the reason for being plugged in for a long time.

According to the cause of the jam, the symptomatic solution is:

1. The router has been used for too long. It is recommended to turn off the router and restart it after a few minutes.

2. The device is too far away from the router. It is recommended to use the device close to the router.

3. The number of router access users is too large. It is recommended that not too many people use a router at the same time, and check whether there are any users who are using the Internet in time.

4. Network problems on the operator's side. It is recommended to wait for a while before using, if it is still stuck, you can consult the operator.

Solve the complex situation of wireless network lag:

1. If you often regularly drop a lot of people around the group, and after a while, the maintenance personnel tell you to restart the PON port equipment, then hurry up and let the maintenance personnel help you change to other optical splitters, it is very likely that the optical module on the upper link will not work or there are rogue cats on the optical splitter, and it can be solved by changing to other optical splitters.

2. After replacing the optical modem and the router or frequently dropping the line, this may be the poor contact between the cat and the network cable in the middle of the router, you can temporarily try the external trawl cable, if the external network cable is not dropped, it means that the internal network cable of the wall is in poor contact, you can spend money to ask the operator to help replace the network crystal head at both ends and the network panel on the wall.

3. A rare case is that the power supply of the cat and router is plugged in with high-power appliances (such as refrigerator and microwave oven), which may also cause the network to suddenly fail to get up.

The relationship between the router and the wifi lag is not big. The reason for the network card may be: if other users are surfing the Internet at high speed, the space of the wire box will be occupied, and you will be very stuck when you go to the Internet.

In addition, it has little to do with wireless routing, unless your routing signal is very poor. If you use a light brazing and stuck, it is the reason of the computer itself, in this case, it is recommended that the software is not put on the C disk, classified storage. It may also be a line problem, such as the network cable is not connected, the network cable quality is poor, and the line sequence is wrong.

Due to the long running time of the device, the interior is overheated. NetworkWhether you use ADSL cat dial-up Internet access or connect to a router to surf the Internet, its network speed is the same as always, without any change. In general, if everyone is connected to the Internet at the same time, the network speed will be diverted, so it is understandable that the network speed of a single user is slower.

Some of the reasons that affect internet speed:

1. The port forms a bottleneck.

In fact, router WAN and LAN ports, switch ports, hub ports, and server network cards can all become network bottlenecks. When the network speed slows down, you can use the network management software to check the data traffic of routers, switches, and server ports during peak network usage hours. You can also use the netstat command to count the data traffic on each port.

Based on this, we can identify the location of the bottleneck in the network data flow and try to increase its bandwidth. There are many specific methods, such as changing the server network card to 100M or 1000M, installing multiple network cards, dividing multiple VLANs, changing the router configuration to increase bandwidth, etc., which can effectively alleviate network bottlenecks and maximize data transmission speed.

2. Firewalls are used more.

Excessive use of firewalls can also slow down the network, so the solution is to uninstall unnecessary firewalls and keep only one that is powerful.

3. Insufficient system resources.

There are too many applications running in the background, and you need to close the programs you don't use or delete useless programs and files to free up resources, or you can just use the junk cleaning function of the optimization software to achieve the purpose of improving the Internet speed.

Router freezes and the network speed is slow

1. Check the cause of slow network speed.

Now disconnect the router and disconnect the wired client. Now let the router connect to only one device, and then perform a speed test on the various software in the computer device. If the speed and bandwidth values we are testing are about the same, then it is not a problem with the speed or the software.

It may be a problem with the router, and you need to adjust the bandwidth value of the router.

2. Check the settings of your router.

Check to see if the router at home has turned on the function of limiting IP bandwidth, if this function is turned on, it will cause our network speed to slow down, just turn it off. Then do a speed test on the computer to see if the computer has any software and processes such as P2P turned on, and if so, turn it off, so that the computer will not slow down the Internet speed. You can install a 360 security guard or Kingsoft guard, turn on the firewall function of traffic, monitor all software processes, reduce traffic output, and speed up the network speed.

3. Check if there is any rubbing net.

Sometimes our wireless network is cracked by the people around us, and rubbing the network can cause our own network speed to become very slow. The more people who rub the Internet, the slower our Internet speed will be, and sometimes even the machine will freeze. We can open our wireless router to set it up to see if there are other devices using our own wifi, and if so, change the password directly.

Then go to the network to limit the wifi setting, so that you can speed up the network. At the same time, it is also possible that the line of the router at home is faulty, and if the line is damaged, the network speed will be slow. Check it, if there is a timely repair, the network speed will be faster.

Intermittent lag of wireless network, in most cases, it is caused by long-term continuous use of the router, if the wireless router is used continuously for too long without rest, a large amount of cache data will slowly accumulate in the router, the cache is not cleaned up in time, and the running speed of the router will decrease due to insufficient memory;

Then there are a series of problems such as access network speed drop and lag, so this kind of problem can be solved by restarting the router, the cache data will be automatically emptied after the router is powered off, and the router can be restored to normal after waiting for a few minutes;

In addition, if the wireless router does not dissipate heat, it will also have the problem of intermittent lag of the wireless network, especially in the hot summer, so it is best to put the wireless router in a ventilated place for heat dissipation.

Of course, it's a re-buy, now that the router has been out of the 6th generation, your old router will be replaced, and the general router will not be stuck, your estimate is very old, affecting the network speed and bandwidth.

There is no need for a router to be connected to a router, as long as the router is connected to a switch, but if you already have two routers and the total number of computers does not exceed six, you can use the second router as a switch.

This is actually a cache problem, because how the router caches too much, it will affect the entire network speed, although the signal is full, but if there is no network speed, our router will receive all kinds of signals when used like this, then the signal will be transmitted to this cache, if you do not clean it regularly, then the router will become more and more stuck, and the network speed will be very stuck, so there will be a network disconnection. We need to clean the cache in the router in time, and then we need to restart. The second is the problem of failure, because when we first started using it, the router basically will not break, very smooth, but we are using it every day, it will also be very tired, then there will be a strike, so if you use it for a long time, it will strike from time to time, although the mobile phone signal is full, but the network can not be used.

At this time, we need to press the restart button, and if we restart, the network signal will become much faster. The third trick, that is, aging, because we use it every day, but we will not restart the parts in it, there will be aging, including heating and other problems, so we will know that it will heat up when we use home appliances, so this is no exception, and then the speed becomes very slow. Then the solution is to put it in a ventilated place so that it does not continue to heat up.

The most likely reason for intermittent lag in the router's wireless network is that it is caused by heavy load caused by long-term work. Because after all, the router is an electronic product, and the life and yield rate must not reach the ideal state, and sometimes there are inexplicable heating and failures. Moreover, you get what you pay for, and some cheaper routers have disconnections and signal fluctuations as the norm.

Solution: Enable the router restart function to ensure that the router recovers regularly. If there is no timed restart function, then restart the device after a period of time.