The stainless steel pot is burned, how to remove the black on it

The bottom of the pot is burnt and paste, the black paste is difficult to get down, and how to deal with the yellow place on the side, learn a little trick to get twice the result with half the effort.

The first method is to soak in hot water for about ten minutes, then wash it, and you can clean it.

The second method is to add water to the pot and boil, add a small amount of dish soap, let it sit overnight, and then scrub it with lead, and Huai Xunhu can be removed. Scrub clean with a layer of oil.

The third method is to add a 1:2 ratio of vinegar to water, remember to cover the blackened part, then cover the pot and bring to a boil, and soak overnight. The next day, remove with a spoon of tea.

The stainless steel pan is burned and the black on the top is removed as follows:

Soak in warm water for a few minutes and use the usual pot cleaning method to clean the hanger. You can also use old cards, the harder ones, and scrape them along the edges of the pot to scrape off the blackened charred scale.

It can be treated with a higher concentration of sodium hydroxide. Pour sodium hydroxide water into the pot easily, soak it for a while, and then use a steel wool ball to scrape for a while, and then it can be processed. Gloves need to be worn throughout the process to avoid getting on the **.

Stainless steel pots should be used with attention:

When using stainless steel pots, it is not possible to add acidic foods to the pot, so as not to react with acidic substances with chromium, nickel and other elements in the stainless steel pot, resulting in some harmful substances entering the food, which will bring a certain threat to the human body.

Stainless steel pots cannot be used to boil traditional Chinese medicine. Because in traditional Chinese medicine, there are more alkaloids or organic acids, in the heated state, it will react with some components in traditional Chinese medicine, so that traditional Chinese medicine loses its medicinal properties and will produce some bad substances.

Stainless steel pot has the advantages of corrosion resistance, rust resistance, easy processing, not easy to deform, etc., and is commonly used in kitchen life, but the heat conduction of stainless steel pot is very uniform, and many brands of stainless steel pot are made of three-layer composite bottom structure.

The use of stainless steel pot is heated evenly, fast heat conduction, will not burn the food because of the high temperature when stir-frying, will not produce fumes, and has a variety of functions such as frying, frying, roasting, stewing, etc., the stainless steel pot with three-layer composite structure can not only maintain the nutrients of food, but also maintain people's health.

Ingredients: white vinegar, edible alkali, water.

Step 1: Pour white vinegar (white vinegar contains acetic acid, which softens dirt) over the stainless steel pan.

Step 2: Pour an appropriate amount of edible alkali into the stainless steel pot (edible alkali has the effect of decontamination).

Step 3: Carefully scrub the stainless steel pan with a steel wool ball.

Step 4: Rinse the pot with clean water.

Step 5: The stainless steel pan has been burned, and the black dirt on it has been removed.

Because of the material, stainless steel pots are corrosion-resistant, high-temperature resistant, and the appearance is relatively good-looking, not easy to stick to the pan, and it is the first choice for buying pots and pans. The stainless steel pot itself also has the characteristics of non-stick pan, if it is not used properly, it will easily stick to the pan, or even burn paste, thus leaving a black mark on the bottom of the pan. So is there any way to wash off the black of stainless steel burnt paste?

Method 1: Start by preparing a container and pour in some white vinegar. Then squeeze some toothpaste into the container and stir.

Then put a paper towel in a mixture of white vinegar and toothpaste, soak it in the bottom of a stainless steel pot and let it soak for 3-5 minutes. Finally, use a scouring pad to scrub the stains and yellowing on the rough surface of the stainless steel pan to make it easy to whiten.

Method 2: Dip a little water on the outer dirt of the pot so that the pot is soaked with water, rub the baking soda on the dirt on the pot, wrap the whole pot in plastic wrap, and leave it overnight. Remove the plastic wrap after two days and wipe the pan with a scouring pad so that almost all the dirt is removed.

1.Add water to a large pot at home, add some pineapple skin, fill the small pot, boil for 20 minutes, and remove when it is cold.

2.Without waiting for the pot to be used, after soaking in warm water for a while, the effect can be doubled with half the effort, and it can be cleaned using ordinary cleaning methods.

3.Cut a few slices of oranges and bring to a boil in a pot. It will be sullen all night and the residue will be removed the next day and will be easily removed.

4.Pour the tomato sauce over the stainless steel pan and wipe with detergent.

5.Dip the bottom of the pot in a little water, then sprinkle the dry fragrant ash evenly on the bottom of the pot, and then slowly wipe it with a steel wool ball, the effect is very good. Please note that the accumulated incense ash must be kept dry, this method can also be used. Traces on the bottom of enamel pots and casseroles are very useful.

1.First check if there is a label on the inside and outside of the new pot, and if there is, remove the label. Some labels are so tight that they are difficult to remove by hand. At this point, you can put a few drops of sesame oil on the label. Once the sesame oil is fully absorbed by the label, it can be easily removed.

2.Apply two drops to a damp cotton cloth and wash, wipe the inside and outside of the pan (including the lid and bottom of the pan) with a cloth, and rinse with clean water.

3.Pour boiling water and a little white vinegar into the pot, shake the pan, and rinse the vinegar into each part of the inner pot.

4.Wipe the pan dry with absorbent paper.

Hello dear, I am happy to serve you: The stainless steel pot is burned black and polished: first, pour the white vinegar on the place that needs to be cleaned, sprinkle with salt and wipe well; Then spread a clean paper towel and soak it with white vinegar; Then let it stand for a period of time and then remove it and clean it with a steel wool ball; Finally, repeat the above steps to clean the entire pot.

There are three methods: 1. If the outside of the pot is blackened, you can use a wet rag to stick the grass ash and wipe it, the grass and wood ash in the city is not easy to find, and the remaining ash can also be replaced by common mosquito coils, which can basically be wiped to the brightness. 2. It's toothpaste.

Keep the toothpaste skin after the toothpaste is used up and don't throw it away. First, we cut off the head and tail of the used toothpaste skin. Then cut out the length of the toothpaste skin according to the size of the pot, and cut the toothpaste skin from the middle to make it from the previous circle into a piece.

Then we use the toothpaste skin to rub on the black scale that needs to be removed, the best toothpaste is to choose the best with particles, so that after slowly rubbing back and forth for about 3 minutes, we use a rag to wipe off the excess toothpaste on the top, which is easy to clean, so that the bottom of the pot can look new after cleaning. 3. Pour an appropriate amount of dish soap, white vinegar and tomato paste into a bowl. Pour the mixture of the three over the yellowed and blackened area, then wrap a layer of paper towel on the outside.

After 5 minutes, everyone tears off the paper towel again, and finally gently rubs it with a steel wool ball, and the pot that looks yellow and black can be as clean as new. Thank you for your trust, the above is my reply, I hope you can ask Pei Jing to help you, I wish you a happy life.

Wu Wang If the stainless steel pot is burned, there will be some black cavity solid substances, which may be difficult to remove, but if they are not cleaned and maintained in time, it will undoubtedly affect our later use effect, such as it may affect the taste when cooking ** meals in the later stage, or it will also affect the service life of the pot itself, which is undesirable, so when this happens, how should it be operated? Friends who have similar confusion can comprehensively understand the following, and learn together the methods, steps and operations that can be taken to remove the black substance left by the burnt surface of stainless steel.

1. How to clean the stainless steel pot that burns black and burns

The first method is to soak in hot water for about 10 minutes, and then wash it, and it can be cleaned very quickly. However, be careful not to brush with steel wool balls to avoid damaging the bottom of the stainless steel pan.

The second method is to boil hawthorn or tomatoes in a blackened stainless steel pot with water. In this way, the blackened part will automatically fall off and there is no need to brush it. However, it is important not to allow the water to boil dry.

Of course, if you think that using fresh tomatoes will be wasteful, you can also choose stale ones, which will not affect the cleaning effect.

The third method is to add water to a stainless steel pot with burnt paste and blacken, add pineapple peel or apple or pear peel, boil and let it stand for 20 minutes. Wait for it to cool and then remove. At this point, the pot will be as clean as new.

The fourth method is to add a ratio of 1:2 vinegar to water, and remember to cover the burnt and blackened part! Then bring the lid to a boil and steep overnight. The next day, remove with a spoon of tea.

The fifth method is to add beer, liquor and water in the proportion to the blackened stainless steel pot, cover the pot, soak for 5 minutes, and then clean.

The sixth method is to dry boil the blackened pot over low heat and sprinkle salt into the pot when it is smoking. Shake gently for a minute, then wipe again to remove.

If the outside of the pot is also blackened, you can wipe it with rosin perfume and toothpaste powder, and it can be cleaned cleanly.

Through the above, it can be known that if the stainless steel pot is burned, there will be some black substance on it, in the event of this failure problem and trouble, we need to clean and maintain it in time, the common measure is to choose some milder texture of detergent, or some other lemonade, etc., they are good suggestions, further we can also refer to the advice of professionals for repair and maintenance, so that it can not affect the premise of the later use of the processing effectIt can also achieve the purpose of protecting the service life of the pot itself.

You can get it for free

If you want to polish the blackened stainless steel pot, first pick a few tomatoes, put them in the pot to boil, then cut a few oranges and boil them in the pot, cover the pot and simmer for a long time. Then pour the oranges and tomatoes from the pan, put a few drops of vinegar in the pan and bring to a boil with hot water. Finally, apply toothpaste to the pot, dip a cloth in some water, and scrub vigorously.

Dress-up. <> tomatoes, oranges, vinegar, toothpaste, cloth.

Pick a few tomatoes first, put them in the pot and cook them, and slowly the burnt part of the bottom of the pan will fall off.

After cleaning the pot, cut a few oranges and bring them to a boil in the pot, cover the pot and let it sit overnight.

Then pour the oranges and tomatoes from the pan, put a few drops of vinegar in the pan, put some hot water in it and bring to a boil.

Finally, apply toothpaste to the pot, dip a cloth in some water, and scrub vigorously.

The appearance of the stainless steel pot is very high, but it is very easy to burn black, so once the stainless steel pot burns black, what should we do.

1. Use incense ash.

First dip the bottom of the pot in a little water, then sprinkle the dry incense ash evenly on the bottom of the pot, and then rub it slowly with a steel wool ball, the effect is very good. Note that the usual accumulated incense ash must be kept dry, this method can also deal with the traces of the bottom of the enamel pot and clay pot, which is very effective.

2. Use waste ** cards and magnetic cards to wash the paste pot.

It is inevitable to paste the pot when cooking, and if you use a hard shovel to clean the scorched scale, it will cause scratches, and if you use a wooden spatula, it is difficult to completely remove the scorched scale. So we can use the card along the edge of the pot to gradually scrape off the charred scale. Note that you don't need to use too much force when scraping.

If the card is made of rigid plastic, it can also be used to scrape dirt on the gas stove.

3. Apply toothpaste.

Toothpaste can increase friction, we use a cloth to boil some water, apply toothpaste, and rub vigorously. It's economical and doesn't hurt the pot. However, it may take a bit of effort to wipe it.