The Dopod S600 touchscreen cannot be calibrated

Can't calibrate or won't calibrate?

Point + sign to hold down and don't put, when + move, immediately let go, when + stop, then press and hold don't put, so repeatedly, be patient.

If the + doesn't move at all, it's a problem with the touchscreen, and if you move it 1 time, it's your own problem.

Screen calibration. In addition to the need to calibrate the screen when you use the device for the first time, if you find that the stylus is tapping the touch screen after using it for a period of time.

If it's not sensitive enough, or if there's an error in the click, it's time to calibrate the screen. You can also calibrate the firefly yourself every once in a while.

screen to make the click more accurate. You can set up > by clicking Start >

System > Screen to access the Settings window.

1.Under the Settings page, tap the System tab, and then tap the screen icon.

2.In the General tab, you can switch between portrait or landscape display modes or press Calibrate Screen to start the screen calibration process.

3.Press and hold the center point of the cross accurately with the stylus, and correct it step by step as the cross moves to all corners.

Your touch screen must be broken, you can replace it with a new touch screen, it's not expensive, 150 can do it.

Dizzy. Want 150? Give me 100 yuan for you. It's a touchscreen issue

Haha, my phone just changes the screen and can't be used haha.

Impossible, the fault after the replacement still means that the replacement is also bad!

Friends around me all use Nokia's No one uses Dopod I want to disassemble the machine by myself There are tools at home But it's a slider Don't stare at Wang and know where to start Friends tips Thank you for viewing Kai Shuzai's original Biyun post

It should be a problem with the screen. Did you change the screen yourself? Or ask the repairman. Maybe the cable was damaged during the repair. I also had such a problem with my previous 838 because the screen was broken.

The cable is aging, and it's not worth repairing it, so let's replace it.

It should be that the touch screen is broken, or its cable contact is poor. If you have strong hands-on ability, you can take it apart and make it yourself. If you are sure that the touch screen is broken, you can buy one yourself and come back to replace it.

Do it yourself, have plenty of food and clothing!

See if it's a film problem, I've encountered it before, tear it open and put it down, be careful!

If the cable is broken, change the cable, it won't be very expensive, dozens of dollars can be found!

Under the dismantling ** tutorial, you have to have a new cable at hand. I've dismantled Samsung, Copycat, Palm Blackberry. There is no circuit involved, and many things can be done by the owner himself.

Let's go to the physical store and have a look.

Chinese medicine dispelling beans does not recur.

1. ROM problem, the screen drift is serious, and you may need to flash the machine.

2. Wire arrangement, there is a problem with touching several wires and needs to be replaced.

The above two possibilities, first flash the machine, play the screen drift patch, see if it works, and if it doesn't work, it will be repaired.