There are several questions about electrical safety

1.Electrical appliances or wires must ensure that the limit current is not used for a long time, do not use electrical appliances where there are flammable gases such as gas or gas, and there is no problem with the connection of the line, and the joints must be connected.

2.The normal situation should be to cut off the power first, and then splash water or isolate it from the air. However, this problem is tilted into the coal mine, and it may be a bit troublesome to cut off the power supply. When extinguishing a fire, use soil to isolate the fire from the air, and be careful not to step on the place where there is electricity.

3.The person who is electrocuted must first cut off the power supply, wrap his hands with a cloth and other insulating materials, and pull the person away from the power supply for first aid.

1. Do not install the switch where there is gas.

2. In case of fire, the power supply will be cut off first.

3. Wrap the injured person with a cloth and pull the injured away from the power supply for first aid.

To effectively prevent the use of electricity, first of all, to ensure the quality of installation, and should meet the various requirements of safety and fire prevention, to use qualified electrical appliances, damaged switches, lamp heads and aging and damaged wires can not be used, the street of wires should be firmly connected according to the regulations, and wrapped with insulating glue, the wiring of the terminal pile head and terminal should be tightened to prevent poor contact caused by loose wiring.

Secondly, do not place flammable materials such as oil, cotton, wood chips, firewood and grass near the switches, sockets, and fuses of power lines. Before an electrical fire, there is a precursor, which will emit an unpleasant smell of burning rubber and plastic. When we smell this smell, the first thing we think about is pulling the brakes and blackout, until the cause is identified.

The vast majority of underground electrical fires are rubber sheathed cable fires, so the focus of preventing this underground electrical fire is to prevent the fire of rubber sheathed cables, followed by preventing fires caused by flushing transformers and white flashing lamps; To prevent the fire of rubber sheathed cable, we must first adhere to the rubber sheathed cable for mineral processing, and secondly, do a good job of cable connection according to the regulations. Suspension, avoid being crushed in the coal pile, and stick to the load. Short circuit.

Leakage protection device'Strengthen daily maintenance; Regularly inspect the quality of insulation and the insulation status of oil-filled electrical equipment; Adhere to the use of relay protection devices, protect the normal operation of the equipment, and remove the combustible substances around the electrical equipment in time; Prepare the necessary fire extinguishing equipment according to the regulations;

When a fire is found in electrical equipment. On-site personnel take fire extinguishing measures as much as possible. Control the spread and expansion of the fire, and should first cut off its power supply, however.

In the underground fire scene, sometimes far away from the switch, it is often necessary to extinguish the fire without power failure, and it is necessary to use non-conductive fire extinguishing equipment to extinguish the fire. And report the fire situation to the mine dispatch room,--What are you doing?".Lie on your back; Nostrils are facing up, clean your mouth, untie your clothes.

Flap open mouth. The nostrils are pinched. Blow for two seconds.

Relax for three seconds. Every five seconds. Operate patiently until recovery, - this is the first aid song of electrocution

Summary. Dear, I'm glad to answer for you :

Common sense of electricity safety.

1) Do not connect the power supply indiscriminately, do not overload the electricity, and do not install substandard fuses and fuses.

2) Purchase qualified electrical products and replace aging power cords and facilities in a timely manner.

3) Frequently check the electrical circuits, power distribution, and power plugs, and replace and tighten them in time if they are loose and hot.

4) Electrical facilities**, pull down the electric switch in time to cut off the power supply, and close the fire with wet cotton to extinguish the fire.

Electricity safety-related issues.

Wait a minute. Ask about custom messages].

Can you hurry up. Dear, there is a high shortage of hail Yuanxing to answer for you: common sense of electricity safety (1) Do not connect the power supply indiscriminately, do not overload the electricity, and do not install substandard fuses and fuses.

2) Purchase qualified electrical products and replace aging power cords and facilities in a timely manner. (3) Frequently check the electrical circuits, power distribution and power plugs, and replace them in time if they are loose and hot. (4) Electrical facilities, pull down the electric volt gate in time to cut off the power supply, and use wet cotton to close the suffocation to extinguish the fire.

I hope mine is helpful to you, if you are satisfied with my service, please give a thumbs up and wish you all the best!

The following points need to be paid attention to in the safe use of electricity:

1. Do not repair or tremble the live lines or equipment in your home, such as fans, washing machines, televisions, etc., to avoid electric shock;

2. Do not use metal to touch electricity, do not touch the power supply with wet hands, and do not use a wet cloth to wipe lamps, switches and other electrical appliances;

3. Install the three-pin socket correctly, and do not change the three-prong plug to a two-prong plug at will;

4. Use the power cord correctly, and do not pull or connect the wires indiscriminately;

5. Do not add electrical appliances to the original line without permission;

6. Correct use of household appliances, and shall not use electrical equipment that does not meet safety specifications;

7. Develop good habits, in the case of unattended or long-term non-use, please unplug the power supply of electric irons, hair dryers, electric stoves and other electrical appliances;

8. It is forbidden to use lead wire, copper wire and other substitute fuse wires as fuses;

9. Use leakage protectors to prevent the occurrence of electric shock and electrical fire.

We hope you find ours helpful.

The home is equipped with electric detectors, screwdrivers, etc., and regularly overhauls the wires;

The meter must be installed with a master insurance to prevent leakage;

If there is no cutout, a ground wire needs to be installed;

When the electrical equipment at home cannot meet the switch and line capacity, it should be replaced in time to avoid overload operation;

When the electrical appliance is connected to the power supply, it is necessary to use a switch or plug connector that can be manually opened or disconnected by Qi Xiao.

The following aspects should be paid attention to in the safety of electricity use:

1.Do not touch switches, sockets, plugs, and power connectors of various appliances when wet or barefoot. Do not wipe lighting appliances and electrical equipment with a damp cloth.

2.It is best to use the right hand when operating electrical appliances and switches.

3.The power supply must be cut off before moving the electrical equipment.

4.Each electrical equipment should use a separate socket, and several electrical equipment should not share a socket for a long time, so as not to affect each other and cause some unexpected hazards.

5.If you find smoke or smell from electrical equipment, quickly cut off the power supply for inspection.

6.Under normal circumstances, the power supply should be cut off in time after the electrical equipment is used.

7.The operating voltage and power (total load) of electrical equipment should not exceed the allowable load of wires, fuses and meters.

We hope you find our days helpful.

Tilt correction reinforcement is suitable for multi-storey existing buildings where the overall tilt value exceeds the specified allowable value and affects the normal and safe use. When the superstructure of the existing building is cracked, the superstructure should be strengthened before tilting. Forced landing correction should be preferred for tilt correction reinforcement, and jacking correction can be used when forced landing correction is not applicable.

In many cases, forced landing and jacking methods are used at the same time. In the process of tilt correction, an on-site monitoring system must be set up to record the tilt correction situation, and when there is an abnormality, the design and construction plan of the tilt correction and reinforcement must be adjusted in time. Hold the positive burn.

To use electricity safely, it is necessary to pay attention to the following aspects: 1. Do not repair or move live lines or equipment at home with bare hands and feet, such as table fans, washing machines, televisions, etc., to avoid electric shock. 2. Don't touch the electricity with metal, don't touch the power supply with wet hands, and don't use the wet cloth.

Summary. Dear, glad to answer for you. Consequences of not paying attention to the safe use of electricity:

Minor damage to electrical equipment, severe electric shock and fire. There are two forms of electric shock injury to the human body: electric shock and electric injury. Electric Shock:

It is the direct contact of the human body with the charged part, and the electric current passes through the human body, causing the destruction or dysfunction of the tissues in the body. At the beginning of the electric shock, the muscles are numb and hot, and then the stratum corneum of ** is destroyed, the resistance of the human body decreases rapidly, the current increases, and finally the muscles of the whole body cramp, difficulty breathing, and heart paralysis, resulting in death. Most electrocution fatalities are caused by electric shock, which is why electric shock is the most serious type of electrocution.

Dear, glad to answer for you. The consequences of not paying attention to the safe use of electricity: damage to electrical equipment in light cases, electric shock and fire in severe cases.

There are two forms of electric shock injury to the human body: electric shock and electric injury. Electric shock: It is the direct contact of the human body with the live part, and the current passes through the human body, causing the destruction or dysfunction of the tissues in the body.

At the beginning of the electric shock, the muscles are numb and hot, and then the stratum corneum is destroyed, the resistance of the human body quickly and quietly decreases, the current increases, and finally the muscles of the whole body cramp, difficulty breathing, and heart paralysis, leading to death. The majority of electrocution fatalities are caused by the return of electric shock, so electric shock is the most serious electrocution accident.

Data Expansion: Instructions for Safe Household Electricity Use: (1) Do not overload electricity, if the electricity load exceeds the specified capacity, you should apply to the power supply department for capacity increase.

Large-capacity point-of-use equipment such as air conditioners and ovens should use special lines. (2) Choose qualified electrical appliances, do not buy and use fake and shoddy electrical appliances, wires, trunking (tubes), switches, plugs, sockets, etc. (3) Do not privately or ask unqualified decoration teams and personnel to lay wires and connect electrical equipment, and find qualified units and personnel for installation and repair of electrical appliances.

4) Do a good job of grounding protection for the metal shell of the electrical appliances that are specified to be grounded, and do not forget to install grounding wires for three-eye sockets and socket boxes; Don't change the three-prong plug to a two-prong plug at will. (5) To choose the fuse wire that is suitable for the load of the wire, do not let the simple Luyi thicken the fuse wire, it is strictly forbidden to use itWire judgment, iron wire, aluminum wire instead of fuse wire.

6) Do not wipe the live lamp heads, switches and sockets with wet hands and wet cloths.

Avoid potential safety hazards of electricity use:

1. Don't overload electricity. Large-capacity electrical equipment such as air conditioners and ovens must use dedicated lines. Wires can not be connected indiscriminately, overloaded, and many electrical appliances cannot function as sockets, such as multiple air conditioners, ovens, etc.

2. Qualified electrical appliances should be selected. Do not use fake and shoddy electrical appliances, wires, trunking (tubes), switches, plugs, sockets, etc.

3. Do not lay wires and connect electrical equipment without permission or ask unqualified decoration teams and personnel.

4. Grounding protection should be done for the metal shell of the electrical appliances that are specified to be grounded. Don't forget to install a ground wire on the socket box of the three-prong socket; Don't change the three-prong plug to a two-prong plug at will.

5. Choose a fuse wire that is suitable for the load of the wire, do not arbitrarily thicken the fuse wire, and it is strictly forbidden to replace the fuse wire with steel wire, iron wire and aluminum wire.

6. Do not wipe live lamp heads, switches and sockets with wet hands or wet cloths.

The following points need to be paid attention to in the safe use of electricity:

1. Do not repair or tremble the live lines or equipment in your home, such as fans, washing machines, televisions, etc., to avoid electric shock;

2. Do not use metal to touch electricity, do not touch the power supply with wet hands, and do not use a wet cloth to wipe lamps, switches and other electrical appliances;

3. Install the three-pin socket correctly, and do not change the three-prong plug to a two-prong plug at will;

4. Use the power cord correctly, and do not pull or connect the wires indiscriminately;

5. Do not add electrical appliances to the original line without permission;

6. Correct use of household appliances, and shall not use electrical equipment that does not meet safety specifications;

7. Develop good habits, in the case of unattended or long-term non-use, please unplug the power supply of electric irons, hair dryers, electric stoves and other electrical appliances;

8. It is forbidden to use lead wire, copper wire and other substitute fuse wires as fuses;

9. Use leakage protectors to prevent the occurrence of electric shock and electrical fire.

We hope you find ours helpful.