What should I do if the Apple 6S mobile phone can t turn on after upgrading

It is possible that the system has entered recovery mode due to some misoperation or other reasons. At this time, we can press and hold the power button and the home button of the phone at the same time and hold them for more than 5 seconds. In this way, the phone can be forced to shut down, and the screen will go black, at this time, press the power button to turn on the phone, and see if it can enter the mobile phone system normally.

2.If you follow the above method and the iTunes connection screen is also displayed on the screen, it means that the current phone's system is damaged and you need to restore it again. Next, please connect your phone and computer with the original data cable, as shown in the figure.

4.When your phone is connected to your computer, open the iTunes software and you'll be prompted to detect an iPhone device in recovery mode.

How to deal with the iPhone not booting normally:

1. Check whether the iPhone has physical damage, such as: bending deformation or water ingress and other accidents;

2. Use the original data cable and charger to charge the iPhone, check whether the iPhone is responsive, and the battery may not turn on if the battery is insufficient;

3. Force restart your iPhone;

4. If there is still no response or cannot be turned on normally after the above operations, it is recommended to go to the local Apple official or authorized after-sales service.

Is there a display on the boot screen? If it is not displayed, it may be that the battery is dead, try again after charging for an hour, if it still does not move when it is turned on, then it is a hardware failure, and it is recommended to send it for repair. If the boot screen is displayed, but you can't enter the system, then it may be a system problem, it is recommended to connect to the computer, use iTunes to restore or upgrade the system.

What to do if your iPhone freezes?

If the iPhone can't turn on after upgrading, it is generally a system failure, you can use iTunes to restore the system, or use the crazy master Apple Repair Master to repair the device, and you can turn it on.

Step 1:Run iTunes and connect your Apple 6s to your computer.

Step 2:Set your Apple 6S into recovery mode and wait for iTunes to recognize it.

Step 3:Select the "Restore iPhone" option and wait for the restoration to complete.

Step 1:Run Mad Master Apple Repair Master and select "Standard Mode".

Step 2:Set your Apple 6S into DFU mode or recovery mode.

Step 4:Start repairing your phone, and when the repair is complete, your phone will reboot and resume use.

What should I do if I can't turn on the phone after upgrading?

The Apple mobile phone 6s can't be turned on after updating the system because the version of the system is too high, and the model itself does not support the operation of the higher version, which will lead to the failure to boot.

You need to take your phone to a specialized phone repair shop to flash your phone and bring your phone back to the version you bought. Note: The mobile phone that is too early or the model is too early is not suitable for updating the new version, the mobile phone motherboard and running memory, the memory does not support the settings of the new version, and it will bring unnecessary burden to the mobile phone.

Mobile phones have now become a necessity of our lives, and there are shortcuts to use them no matter what we do. With the progress of the times and the development of science and technology, mobile phones are becoming more and more important in our lives, from the very beginning of Big Brother, line landlines to current smart phones, these are the products of science and technology, who would have thought that it would become such a small and convenient tool after twenty years when we use Big Brother. Although mobile phones bring convenience and happiness to our lives, we must not indulge in games, which not only waste time, but also have an impact on our physical health.

It's troublesome, I'll teach you, I will.

After the update, why can't I turn on the phone when it is turned off?

After connecting iTunes, it will automatically restore the iPhone6, everyone just wait for the recovery, don't worry.

If you are not an iPhone6 device but other iOS devices, the above situation also occurs during the upgrade, you can also solve the problem in the article.

The reasons and solutions for other iphone6 can't turn on, friends who need to take a look:

What should I do if my iphone 6 won't turn on?

1.It may be due to the battery running out and the device cannot be turned on. If this is the case that we can't turn on, please connect the phone to the power first, if you see a charging sign on the screen at this time, and the battery is very low, it means that the battery is dead.

2.Don't think that when you connect it to the power supply, you can turn on it normally when it is charging. However, if you use up all the battery charge, the charge will need to be charged to 5% before it can turn on properly. So in this case, please let the phone charge for a while before turning it on.

3.If you are sure that the current battery of your phone is sufficient, but it cannot be turned on normally, there may be a problem with the software system of your phone. At this time, we can try to press the "Home and Power" button of the mobile phone at the same time until the screen is lit up and there is a display.

4.If the above operation method does not work, at this time we can also connect the phone to the power supply, and then press the power and home button on the home screen at the same time to see if it can be turned back on.

iphone6 won't turn on solution.

1.Press the Home button and hold it for 6-8 seconds to quit any program that can get your iPhone stuck.

2.Try long pressing the power on and off button, if it can restart, this is the best.

3.If that doesn't work, try pressing the home and hibernation wake buttons at the same time and holding them for about 10 seconds to force the shutdown.

If you can't turn on the phone, connect the computer to enter DFU mode and swipe the line.

Same as above, force the boot to try first, and then brush it if it doesn't work.

It is recommended that you go to the regular after-sales service to take a look, because it may be the reason of the mobile phone system, I suggest that you go to the regular after-sales center to test it, because in the regular after-sales center, the service fee can be waived by making an appointment in advance.

Repair the mobile phone or go to the regular after-sales center for repair, so as to have a guarantee, in the case of not understanding, it is not recommended to disassemble the machine and repair it blindly, so as not to cause damage to the mobile phone. If it is convenient, you can go to the store for inspection and repair.

Why can't Apple 6 turn on the system after the system is upgraded?

If you force shut down or restart in the middle of the update, there is a certain chance that it will cause white apples, and if there are white apples, you can reinstall the system by connecting iTunes to recover, but all data will be erased, and the method is as follows:

2. Until you see the device in the DFU state on the computer, after the computer prompts, release the home button, click the OK recovery button on iTunes, and click confirm the recovery in the pop-up selection box;

If it still doesn't work, it is a problem with the mobile phone system, please go to the Apple mobile phone after-sales service to find a professional to repair.