The host with the 2500 can run AutoCAD smoothly

Hard disk 160g **270 yuan for the whole set -70 yuan is fine. Seagate's firmware door hard disk 160g 250 yuan. But I can't ask for it.

Seagate Barracuda 11th generation. The 12th generation is also around 300. Not cost-effective.

So I recommend spending less than 50 yuan to buy 3 times the capacity.

The first Intel platform.

CPU: Intel E7400 750 yuan.

Motherboard: Spartak P45 Kuroshio series 485 yuan.

Memory: Kingston 2G DDR2 800 140 yuan.

Hard disk: Hitachi 500g 340 yuan.

Graphics: Dilan Hengjin ATI 4670 480 yuan.

Power supply Huntkey Panshi 400 rated 350w 260 yuan chassis: ordinary 38 degrees 90 yuan.

Total: 2545 yuan. About 2600 yuan in different regions.

The second set of AMD platforms.

CPU AMD Phenom X3 8650 (Box) 530 yuan.

Motherboard Onda 790gs 128M version 540 yuan memory Kingston 2GB DDR2 800 (narrow board) 140 yuan.

HDD Hitachi 500g 16m 340 yuan.

Graphics: Dilan Hengjin ATI 4670 480 yuan.

Power Huntkey Panshi 400 rated 350W 260 yuan optical drive Samsung*** 105 yuan.

Chassis: ordinary 38 degrees 90 yuan.

Total: 2485 yuan in different regions** around 2530 yuan!

CPU AMD Athlon: X2 4600+ AM2 (boxed 65nm)

Memory: Apacer 2GB DRR2 800

Motherboard ASRock A790GMH 128M

HDD Hitachi 160G 7200rpm 8MB SATA graphics card Integrated high-performance graphics card (HD3300).

Display AOC 9125W+

Optical drive ASUS ***-E818A3

Keyboard and mouse LG Blade A

Chassis Big Buffalo A0707 + Huntkey Calm King Enhanced Edition.

Speaker Kaneda S3330

A total of 2491 yuan.

2.Choosing the Intel platform at the price of 2500 yuan will take up too much budget, so I chose AMD

3.Remove the display** only about 1600 yuan.

4.The hard drive was originally 160

2500rm is perfectly fine.

If you say a lot of graphical and numerical calculations on a regular basis.

CPU is recommended to use Intel's, after all, this is still the first choice in professional graphics workstations.

Needless to say, the memory should be as large as possible.

It's best to use nvidia for graphics cards, after all, it's better than ati in terms of drivers and performance.

CPU Intel Core 2 Quad Core Q8200 (Case) 960 Motherboard Onda G45S 599

Memory: ADATA 2G DDR2 800 (145) HDD Seagate 500GB 16M (Serial Port) 375 CD Drive Pioneer ***-130D 120

Chassis Parkson C602 80

Power supply Huntkey Calm King Diamond version 228

Total: 2507 RMB.

The price difference between a 160g and 500g hard drive is small, but the cache of 500g is twice as large as that of 160g.

As long as the host is easy to do, the 2nd floor is written well.

Main board: UNIKA UR790GX

CPU: AMD Athlon's X2 7750 Black Box Original Pack is now less than 400

Hard disk: Western Digital (WD) 500GB 7200 to 16MB (serial GP).

Memory: ADATA 2G DDR2 800 (Wan Zi Qianhong) is guaranteed for three years.

Graphics: Shuangmin (UNIKA) Infinite HD4830 Maverick Edition.

Chassis:Youze T21F This depends on your hobby.,Power supply and chassis are also the bulk of JS installation money.。

Power supply: Shunda ATX-480

CD-ROM drive: BenQ DW2200 120 or so.

Total Actual Amount:

It's just that the 7750 is now cheaper again. The hard disk is now very little, the optical drive is about 120 fast money, take a few classmates to bargain when you buy it, you can reduce it on this basis by about 100, if you can't go down, you can't be higher than this**.

CPU AMD Athlon64 X2 7750 (Black Box) 405 Gigabyte GA-MA770-DS3 (Rev..)559 or MSI 770-C45 699

or Jet Xblue-77A2 399 Memory Goldbond 2GB DDR2 800 (Millennial) 145 HDD WD 320GB 7200 rpm 16MB (Serial YS) 315 Graphics Card Onda HD4830 512MB Shengo 599 Optical Drive Pioneer ***-130D 120

LCD Great Wall M95 760

Chassis Big Buffalo A0707 (empty) 105 Power Supply Huntkey Panshi 400 ( 280

A total of 3228 yuan The actual price of the goods is 3000, you can get it, if the budget is not enough, you can use the Lanbao 4650 The actual price of the goods is 380, and the display can also be used LG W1942SP The actual price of the goods is 850, according to your budget to choose What I provide is the quality of the products of large factories, absolutely ***.

If you have something, you can hi me directly.

Main board: UNIKA UR790GXCPU: AMD AthlonX2 7750 black box original hard disk: Western Digital (WD) 500GB 7200 to 16MB (serial GP).

Memory: ADATA 2G DDR2 800 (Wanzi Qianhong) three-year warranty Graphics card: Shuangmin (UNIKA) Wuji HD4830 Maverick Edition Chassis: Youze T21F

Power supply: Shunda ATX-480

CD-ROM drive: BenQ DW2200

Total Actual Amount:

Supplement. Actually: AutoCAD's requirements for graphics cards can be said to be high and low.

Low: It's because it's not like gaming software, which requires an advanced graphics card.

High: You need to configure a professional graphics card, which is not a common graphics card on the market, and it is not low.

Just get a discrete graphics card, and be stable.

2500, I think the money is very rich, AutoCAD requirements are not high.

CAD office computer, if you do not consider the configuration upgrade of the back computer, you can consider using the following configuration, a total of about 3000:

Intel Xeon CPUE3-1230V2, frequency four cores and eight threads, second-hand**680

Cooler radiator, **90

ASUS P8B75-V motherboards support 1155 CPU interfaces, DDR3 RAM**230

Used GTX960-4G or new 1050-2G graphics card **820

HDD Seagate 1T or 120G SSD ZOTAC Filmrun **350

ADATA DDR3-1600 Memory: 4G 2, Total 8G Memory: **280 2= 560

Kanegawada chassis **150

Great Wall 400W Power Supply**150