Whether the glass window insulation film is pasted inside or outside

3M's is very good, and the inner paste is better.

Both inside and out, depending on whether you are a car film or an architectural film!

It is possible to stick it inside and outside, but it is best to stick it on the inside.

Generally, junior technicians can only apply film to the side windows, while only intermediate and senior technicians can apply film to the front windshield with a large curvature.

Before the film, it is necessary to check whether the installation of the window glass is intact and the integrity of the car glass to ensure that the subsequent film work can operate normally.

Be sure to cover the necessary parts of the car before applying the film to prevent liquid from penetrating. Sprayed cleaning fluids and lubricating fluids can affect trim parts such as automotive electronics and interior seats.

Wash the interior and exterior surfaces of the windows before applying the film (focusing on the interior surfaces and glass sealant areas). This is mainly to eliminate the dirt or other object construction quality problems between the heat insulation film and the window glass after the film, and ensure that the film and glass can be perfectly combined.

The membrane is pre-cut. Use a ruler to measure the size of the front and rear windshields, and cut the film according to the measured size. (The professional film mechanism is through the computer, which is tailored according to the model).

Spray the installation fluid. Dust spots can be avoided and corrosion at the edges can be reduced, resulting in the desired viscosity and better application results.

Dry roasting, wet roasting shaping. The film is dry-roasted first so that the film can be fully pre-shrunk. In order to further improve the adhesion of the heat insulation film, it is also necessary to wet bake and shape the heat insulation film.

Extrusion of the installation fluid: In the process of using the wiper to remove the installation fluid, try to scrape the installation fluid between the heat insulation film and the window glass, which can reduce the drying time of the heat insulation film and obtain a better bonding effect, overall performance and visual effect.

Check after sticking. "Three looks and one attention": look at the entire heat insulation film to see if there is any dust and bubbles, see whether the corners are firmly glued, and sit in the car to see if there are any places that affect the line of sight (especially the front windshield and side windshield). After the film, it is recommended not to raise or lower the glass arbitrarily within 48 hours.

The most important thing to pay attention to when applying the film is the use of hair dryer, if you blow this place for a long time, it will cause the glass to crack due to uneven heating. Therefore, it is necessary to find those professional authorized stores for the film, so that the quality of the film will be the best and the danger of glass cracking can be avoided.

Also, the car film is best in rainy weather, and when it is pasted on rainy days, there is very little dust in the air, which has certain benefits for aesthetics.

The film is attached to the inside of the car glass, and the Northern Lights Solar Film will serve you wholeheartedly!!

Dear, I am very happy to serve you, the answer is as follows: Can double glass be pasted with glass insulation film, A, kiss can paste the heat insulation film in summer, there is no effect, and it will be colder in winter, unless the heat insulation film can not shine in a little light, and it will be dark after pasting, so that it can be slightly better in summer, but it will be more miserable in winter. The main thing may be that the single-layer glass has poor thermal insulation performance, but if the double-layer insulation is better, it will heat people to death in summer and better in winter. It is recommended to use thicker curtains for double glazing, so that the curtains are blocked in summer, and the film has nothing to do with double glazing, and the double glazing is only a relatively good sound and heat insulation effect.

For privacy protection, you need glass, special glass, proportional colored or coated glass.

As we all know, the glass of windows is divided between inside and outside, so is the window insulation film inside or outside? The answer is yes, there is a difference between the inside and the outside of the window insulation film, and most of the heat insulation film is attached to the inside. Let's take a look at the specific knowledge about the inside or outside of the window insulation film!

The main purpose of window film is to make the interior more comfortable, and the heat insulation film is the right thing to do. In general, most homeowners only consider the inside of the insulation film when using the insulation film, and do not have the idea of putting the insulation film on the outside of the window.

There are also some people who believe that to make the interior cooler, cooler and more comfortable, the window film should be applied to the outside of the window to block more sunlight and heat, because the sun is shining in from the outside. But here we need to pay attention to the fact that the window insulation film on the outside of the window is usually exposed to the wind, sun and rain, so it needs to have waterproof and sunscreen performance, so the heat insulation film on the outside of the window is usually a special film.

It is also advisable to apply film to the inside and outside of the window to maximize the thermal insulation, but the cost of renovation is slightly larger, and it can also be considered if the owner has the budget.

When the owner is ready to paste the window insulation film, he should first figure out the problem of whether the window insulation film is inside or outside, and secondly, he needs to know some tips about pasting the heat insulation film

The size of the window insulation film should be cut to be about 1 to 2 cm larger than the window glass.

There are two layers of window insulation film, the protective film is transparent and pasted on the outside, and the film is the colored part, so the transparent protective film attached to the outside should be removed before use.

Be careful not to blister when applying the film, and scrape the moisture off when the protective film is removed.

The above is the answer to the inside or outside of the window insulation film sticker, is it helpful to you?

If you want to film the windows at home, you need to guess the source to understand the specific operation method. Is the window film attached to the glass or on the outside? PChouse will take you to find out.

Whether the window film is attached to the inside or outside of the glass mainly depends on the actual situation

1. Window film stickers inside.

If the film is pasted inside, the biggest advantage is that it can extend the service life of the film, of course, it can also make the film play a certain role in heat insulation and light insulation, so that the occupants can live more comfortably, so for most users, they will be more inclined to stick the film on the inside of the window.

2. The window film is pasted outside.

For some families, it will also be pasted outside, because the light and heat are shining in from the outside, so if you want the house to become cool, the film can be put outside to block more sunlight, but if you want to stick the film on the outside of the window, you must pay attention to buying a window film with waterproof and sunscreen functions.

3. Window film is pasted inside and out.

If you want the room to look more comfortable, and at the same time give full play to the role of the film, you can also apply the film on the inside and outside of the window, which can not play the role of heat insulation, privacy protection, and ultraviolet protection to the greatest extent, and at the same time extend the service life of the film to a certain extent.