As soon as the new book is used in Inventor, the screen will be blacked out

Updated on number 2024-02-08
18 answers
  1. Anonymous users2024-02-05

    Is your graphics card an N card or a A card? If it is an A-card, there may be problems with the compatibility with Inventor.

    It is recommended to upgrade the graphics card driver and try it out.

  2. Anonymous users2024-02-04

    Boot was normal at first,Then the screen went black,This is a bit like a problem with the graphics card driver,This possibility is greater than the bright object,If it's convenient,You can turn on the phone again,Keep pressing f8,Then select safe mode,After entering the system,Find Device Manager,Then find the graphics card driver,Delete the graphics card driver,Restart it,Then use the driver life、Or 360 driver Datong Tuanshi software to automatically install the matching graphics card driver。 Another point,This system is the most local Huai orange is good to install win7 64-bit,Don't use XP,XP for these new architecture hardware,Too outdated,It's all compatibility drivers。

  3. Anonymous users2024-02-03

    The computer will automatically restart if it overheats instantly. The computer has a temperature setting value, and when it reaches this temperature, it will automatically jump off, which is considered overheating protection. There are many types of possibilities, such as large air moisture and small-scale short circuits; There is a lot of dust, which affects the heat dissipation; The heat transfer silicone on the graphics card CPU is dry; The computer turtle speed card exploded and crashed ......

  4. Anonymous users2024-02-02

    If the temperature is too high, open the case cover and sweep off the dust.

  5. Anonymous users2024-02-01

    You unplug the graphics card cable or memory first, start the computer, the computer can't find the graphics card, it will automatically shut down! Then, you are inserting the graphics card or memory back (note, the memory module cannot be inserted backwards, it cannot be burned) You are starting the computer at one time, press the F11 one-click restore button! Restore it!

    Try it! If not, you're installing the system from it!

  6. Anonymous users2024-01-31

    Log in in with security mode, and then turn off Remote Login to Remote Assistance. Sweep away the virus and open the firewall.

  7. Anonymous users2024-01-30

    It's possible that your computer has been poisoned. Antivirus or redo the system, when logging in to multiple users, that may also happen.

  8. Anonymous users2024-01-29

    There is a problem with your power supply, the power supply is unstable, you don't believe it, you can use a multimeter to measure it. There is also a problem with the power management chip on the motherboard. ,I hope you're still the first one.。。 Hehe.

  9. Anonymous users2024-01-28

    This is generally a hardware problem, you unplug the battery, just use the power supply to try, and the next Master Lu to look at the maximum temperature record or temperature pressure test to see the maximum temperature. It's best to have an adjustable power supply to see the current, the problem with the motherboard is more likely.

  10. Anonymous users2024-01-27

    He has a problem, and it is not good to send it for repair. The repairer of the computer asked you to change the motherboard and power supply, but I didn't change it.

    Broken Computer" I deal with it like this, as long as I can get into the BIOS, I can fix it.

    First, clean the motherboard and handle the interface.

    Next, boot into the BIOS settings, boot the first boot sequence set to the optical drive to start "this will be" with a pirated system disc into it, boot on.

    After the information on the disc appears, instead of installing the system, you use the "Hard Disk Magician" on the CD, and after entering, NTFS formatted the hard disk. Note that all partitions are formatted, which is a crucial step to reinstall the system after playing with its processing. "No, ask someone to help".

    After installing the system, whenever you can't format the hard disk, you can only use the "Hard Disk Magician" to format the hard disk to reinstall the system, use it as the format hard disk tool, don't use the system's own formatting tool. Remember, remember!

    In fact, there are several modes of hard disk NTFS, when installing the system, it is one mode after the PE system grid hard disk, and the low grid under the Microsoft system is another. For example, the C drive is the PE system grid, and the D drive is the operating system grid. After booting up, the data is incorrect, and it can only be started repeatedly.

    It also applies to the black screen of the computer. Try it, and you'll earn it anyway.

  11. Anonymous users2024-01-26

    There is a possibility that your system has hit the black screen treatment patch implemented by Microsoft for non-genuine systems, this is Microsoft's means of cracking down on non-genuine systems, you try the 360 patch recovery option, this many people have a black screen of death after playing, you can try to restore the patch. There is when it is turned on.

  12. Anonymous users2024-01-25

    It is recommended to sweep the dust in the case, you can use a USB flash drive to reinstall the system, I often install the system like this, I wish you a smooth operation.

  13. Anonymous users2024-01-24

    It is estimated that there is a problem with the radiator, it is recommended to disassemble the computer and clean the radiator, graphics card and memory module.

  14. Anonymous users2024-01-23

    If you have a fan problem, you can use a USB flash drive if you can't turn it on.

  15. Anonymous users2024-01-22

    This may be a problem with the graphics card, or the graphics card driver. The premise is that there is no blue screen in other cases.

  16. Anonymous users2024-01-21

    Is it a connectivity issue? If it doesn't work, you can reinstall the system, or you can only call someone to fix it.

  17. Anonymous users2024-01-20

    It may be the cause of poor contact, check whether the graphics card and memory of the computer are firmly inserted. It may also be that the driver is not installed well, check the driver, and if there is a problem, you can use the driver wizard to reinstall it. Hope it helps.

  18. Anonymous users2024-01-19

    The reinstalled system is missing some files.

Related questions