What should I do if I lose a Tiggo 5 smart key

If you lose your smart key, first check whether you still have a spare key, which you can use to enter the car and contact the repair station as soon as possible. In order to ensure the anti-theft security of the whole vehicle, it can be solved by changing the key or changing the lock. For the smart induction key, when changing the key, you need to modify the computer parameters, rematch the complete set of new keys, the owner needs to provide proof of vehicle and identity, and the manufacturer needs to issue the corresponding parameters or password of the model, the lost key after the replacement can no longer start the engine, but there is still the possibility of opening the door.

Another solution is to replace the entire car lock (including the engine ignition key cylinder), which is more secure, but the repair cost and repair time cost are higher.

When buying a car, the car has two keys, one of which has a small plastic strip on it, which is extremely numerous, this is the password of your car key configuration, bring the password, go to 4s to match a new one.

It should be noted that, generally speaking, the ** of 4S is relatively high, and the advantage is that the safety factor is high. It can also be equipped with a car key, which is cheap, but the security is not easy to say. It's up to you to make your choice.

You can go to the local 4S store to buy a handful, and rematch the program.

Hello, isn't there another handful, you can make it, thank you.

If you lose the key, it is best to go to 4S to reconfigure a set of keys to prevent the loss of the car.

Hello, it is recommended to change the set of keys.

Chery Tiggo 5's one-button start does not respond, it may be that the smart key is dead. After opening the door, put the smart key into the handbrake.

In the back of the storage box, it can be activated with a single button. One-button start car is a smart car.

The part of the device is a push-button device that implements a simple ignition process and can turn off the ignition. The car's one-touch start can be modified in the position of the original car key lock, or it can be modified using a separate panel. Many cars are equipped with such smart devices to increase their competitiveness in the market.

It is possible to install both high-spec and low-spec vehicles at the same time, but it is of little sense to start at one key touch. The use of the PKE intelligent system will show the need for intelligent modifications. At present, there are about 100 domestic manufacturers producing intelligent one-button start.

Most of them are transitioned from manufacturers who produce anti-theft devices. With the gradual increase in market demand, one-button start has gradually become a must-have equipment for automobiles. The ** of the product gradually declined and gradually became a popular product.

A professional installer is required for the modification to be carried out smoothly. In order to achieve its various functions, special treatment is required in terms of automotive electronic anti-theft.

Now many cars already have this smart device to increase market competitiveness, whether it is a high or low configuration of the vehicle can be installed, but a single one-button start is of little significance, and the use of the PKE intelligent system will show the necessity of intelligent modification. At present, there are about 100 domestic manufacturers of intelligent one-button start.

Most of them are transformed from manufacturers of anti-theft devices, with the gradual rise in market demand, one-button start has gradually become a necessary equipment for automobiles, and the product has gradually fallen, and gradually become a popular product, which requires professional installers in order to successfully modify its various functions, involving automotive electronic anti-theft also needs special treatment.

Hello, you can put the key on the start switch, you will sense the electricity, and then start.

Put the key to the sensor identification place to start the car.

There are four situations in which the car remote key fails:

First, the transmitter of the key is broken, and the firing command is incorrect.

Second, the car's receiver was broken and could not control the doors.

Third, the door lock is broken and it can't be locked at all.

Fourth, the electronics in the key are out of power.

The above problems can be solved by going to ordinary repair shops.

The car remote control key refers to the wireless remote control function of the central lock. The owner does not need to insert the key key into the lock hole to open the door and lock the door from a distance, and its biggest advantage is: no matter day or night, there is no need to find the lock hole, and it can be unlocked (opened) and locked (locked door) from a distance and conveniently.

Basic principle. A weak radio wave is emitted from the key, and the electric wave signal is received by the car antenna, and the signal is identified by the electronic controller ECU**, and then the actuator (motor or electromagnetic manager circle) of the system performs the action of opening and locking. The system is mainly composed of two parts: a transmitter and a receiver.

Hello, the current number of people consulted may not reply in a timely manner, if it is a vehicle failure problem, it is recommended to use the computer to detect the specific cause of the failure, search for "car master" can consult car problems at any time, 24 hours ** answer.

Summary. Hello dear, 1Push the mechanical key release slider to remove the mechanical key.

2.Separate the smart key cover with a flathead screwdriver with tape wrapped around the tip and remove the board.

3. After removing the battery holder from the circuit board, remove the depleted battery from the battery holder, then insert the new battery with the positive (+) facing up.

4. Install the smart key in place in the reverse order of removal, and test whether the key can work normally.

How to open the key to Chery Tiggo 5.

Hello dear, 1Push the mechanical key release slider to remove the mechanical key.

2.Separate the smart key cover with a flathead screwdriver with tape wrapped around the tip and remove the board.

3. After removing the battery holder from the circuit board, remove the depleted battery from the battery holder, then insert the new battery with the positive (+) facing up.

4. Install the smart key in place in the reverse order of removal, and test whether the key can work normally.

The Tiggo5X is usually equipped with a mechanical key and a smart key for the owner. If one of them is lost, the other can be used as a backup. But once your smart key and mechanical key set lose the balance lead, how can your key be re-played?

Let's talk about the solution of how to replay if the key is lost.

First of all, find the 4S store where you bought the car and rematch. Usually, 4S stores need the store owner to provide an anti-theft code that configures the key. After obtaining the password, the 4S store needs the store owner to provide the key tooth number to configure the new key. Although the process is time-consuming and laborious, the solution is relatively stable.

Second, when you call 110 or 114 for help, the corresponding linkage center will notify the nearby or on-duty unlocking matching service company, and professionals will get in touch with you. But in 110 and 114, there are very difficult multi-lock service companies linked together, and the professionalism remains to be investigated.

Third, completely renew the lock, which can cost four to five times as much as changing the key. Also, changing a key for a lock is usually not covered by an insurance company, so it can be costly.

In order not to hassle, waste time and money, the best thing to do is for the owner to take care of his keys. Dear Tiggo5X owners, let's have a long snack.

Millions of car purchase subsidies.

Tiggo 5x is generally equipped with a mechanical equipment key and an intelligent key to the owner, if one is lost, then another can also have a reservation effect, but once your intelligent key and mechanical equipment key set together are gone, then how to match your key again, let's talk about how to match the solution again if the key is lost.

First, find the car 4S shop to buy a car to match again, the general car 4S shop must be equipped with a key anti-theft login password, get this Tongyuan a login password, the car 4S shop must be given by the owner of the key tooth model, to be equipped with a new key. Although the whole process is time-consuming and laborious, this plan is more appropriate.

Second, look for 110 or 114, when you ask for them, the corresponding stool swimming core will be notified in the surrounding or on duty door lock key service center, there are professional staff to establish contact with you. However, in 110 and 114, there are many hardware lock service centers in the chain, and the professional ability still needs to be investigated.

Thirdly, to completely upgrade the door lock, this type of plan may require four to five times the cost of changing the key, and the replacement of the lock cylinder with the key is generally not covered by the car insurance company, so the cost is high.

In order to better avoid labor, time-consuming, and money-burning, the best way is for car owners to store their own keys.