What is the Japan PSE certification? Is it mandatory?

PSE (Product Safety of Electrical Appliance & Materials) certification (called "fit inspection" in Japanese) is a mandatory market access system for electrical appliances in Japan, and is an important content stipulated in Japan's "Electrical Appliance Safety Law", which divides electrical appliances into "specific electrical appliances" and "non-specific electrical appliances", of which "specific electrical appliances" include 116 products; "Non-specific electrical appliances" contains 341 products, and the technical requirements include EMC and safety.

All products that belong to the "specific electrical products" catalogue to enter the Japanese market must be certified by a third-party certification body authorized by the Ministry of Economy, Trade and Industry of Japan, obtain a certification certificate, and affix the diamond-shaped PSE mark on the nameplate;

Products that fall under the "non-specified electrical appliances" catalogue must be verified to meet the Japanese technical standards for electrical appliances through self-testing and self-declaration to enter the Japanese market, and a circular PSE mark must be affixed to the nameplate.

PSE certification is a mandatory safety certification for electronic appliances in Japan, and it is a mandatory market access system for electronic appliances in Japan. Depending on the product, PSE certification is divided into two categories: Class A diamond PSE certification and Class B PSE round certification.

Class A: Diamond PSE Certification:1.Diamond PSE is generally aimed at components, especially key components such as electronic components 2Diamond-shaped PSE requires testing + factory audit and has a long cycle.

3.The diamond-shaped PSE certification is issued by Japan**.

4.According to the Denan Act, manufacturers are obliged to keep test results and certificates;

5.The label must have a diamond-shaped PSE logo.

Category B: Round PSE Certification:1.PSE circular certification is generally for the whole machine;

2.Circular PSE does not require a short audit cycle;

3.Round PSE can be tested and certified by a Japanese accredited laboratory;

4.Must be certified by a third-party certification body licensed by an international accreditation body;

5.According to the Denan Act, manufacturers are obliged to keep test results and certificates;

6.The label must have a circular PSE logo.

Category A: Diamond PSE Certification Cost:The cost of diamond PSE certification includes testing fees, certification fees, factory inspection fees, etc., and the cost is generally about 2-30,000 yuan.

Category B: Round PSE Certification Cost:The cost of circular PSE certification only needs to be tested + certified, and there is no need to inspect the factory, and the cost is relatively low, generally about 3500-5000 yuan.

PSE certification application process:(1) PSE certification application form.

2) Factory Inspection Questionnaire.

3) A copy of the business license of the applicant, manufacturer, manufacturer (4) Product manual.

5) Description of product differences (there are multiple models to be provided) (6) List of key components and/or main raw materials.

7) Product size drawing, ** drawing and the size drawing of each part.

The cost should be determined according to your product, PSE is divided into prismatic and circular, prismatic needs to be inspected, circular does not need to be inspected, and it is also based on your product to decide whether you need to do a circular or prismatic, and the time for issuing the certificate is also different, learn more about my account.

PSE certification is a mandatory safety certification in Japan to prove that electrical and electronic products have been tested by Japan's Electrical and Raw Materials Safety Law (DENAN Law) or international IEC standards.

Process: Testing, Audit, Certification.

The cost is determined by the product.

According to our experience with PSE certification, there is such a classification:

1. From the perspective of certification classification, the certification forms include diamond-shaped PSE certification and circular PSE certification, and different products in different catalogs do different certifications.

2. From the perspective of the certification process, the certification application forms are:

1) Pure type test, no factory inspection is involved.

2) Secondary type test (applicable to factory inspection before).

3) Initial type test + factory inspection (applicable to initial certification).

Hope it helps

Yes! Introduction to PSE CertificationPSE certification is the electromagnetic compatibility certification of Japanese cable products, and it is a mandatory safety certification! PSE certification is divided into two types: PSE round certification and PSE diamond certification.

1) PSE diamond certification - specific electrical products (Specified Products), including 116 products;

Common typical products: mobile phone chargers, transformers.

2) PSE circular certification - non-specified electrical products, including 341 products;

Common typical products: batteries, power banks.

PSE certification processPSE certification process

PSE (Product Safety of Electrical Appliance & Materials) certification (called "fit inspection" in Japanese) is a mandatory market access system for electrical appliances in Japan, and is an important content stipulated in Japan's "Electrical Appliance Safety Law", which divides electrical appliances into "specific electrical appliances" and "non-specific electrical appliances", of which "specific electrical appliances" include 116 products; "Non-specific electrical appliances" contains 341 products, and the technical requirements include EMC and safety.

All products that belong to the "specific electrical products" catalogue to enter the Japanese market must be certified by a third-party certification body authorized by the Ministry of Economy, Trade and Industry of Japan, obtain a certification certificate, and affix the diamond-shaped PSE mark on the nameplate;

Products that fall under the "non-specified electrical appliances" catalogue must be verified to meet the Japanese technical standards for electrical appliances through self-testing and self-declaration to enter the Japanese market, and a circular PSE mark must be affixed to the nameplate.

What is Japan PSE Certification?

PSE certification is a mandatory safety certification in Japan to prove that electrical and electronic products have been tested by Japan's Electrical and Raw Materials Safety Law (DENAN Law) or international IEC standards.

Japan's DENTORL Act (Electrical Installations and Materials Control Act) stipulates that electrical and electronic products must pass safety certification to enter the Japanese market. Among them, 161 Class A products should obtain the diamond-shaped PSE mark, and 341 Class B products should obtain the circular PSE mark.

PSE certified product range

There are two types of PSE certification: PSE diamond certification and PSE round certification.

Diamond certification - specified products, including 116 products;

Common typical products are: mobile phone chargers, transformers, etc.

Circular certification - non-specified products, including 341 products;

Common typical products are: batteries, mobile power supplies, etc.

There are two types of PSE certification: PSE diamond certification and PSE round certification.

Diamond certification - specified products, including 116 products;

Common typical products are: mobile phone chargers, transformers, etc.

Circular certification - non-specified products, including 341 products;

Common typical products are: batteries, mobile power supplies, etc.

PSE certification is a mandatory safety certification in Japan to prove that electrical and electronic products have been tested by Japan's Electrical and Raw Materials Safety Law (DENAN Law) or international IEC standards. Japan's DENTORL Act (Electrical Installation and Material Control Act) stipulates that 498 products entering the Japanese market must pass PSE safety certification. Among them, 165 Class A products should obtain the diamond-shaped PSE mark, and 333 Class B products should obtain the circular PSE mark.

Before the certificate is issued, the manufacturing plant will be inspected by the testing agency. Once the requirements have been met for testing and factory inspection, the use of the PSE mark on the battery charger as well as the mark of the testing institute is permitted. It is required to carry out 100% inspection of the products produced, however, different product testing items are different, usually high voltage test and protective grounding continuity test.

The certificate is valid for 3 years.

The regulations require Japanese buyers to register and declare to Japan METI within one month after purchasing goods, and must mark the buyer's name or ID on the product for supervision and management in the future product sales process.

According to the Product Material Safety Act, the responsibility for the safety of products imported into Japan rests solely with the Japanese importer, and as such, the importer is required to keep test reports and inspection records. Importers can also view inspection records via the Internet.

2.Enforcement Ordinance of Electrical Appliance and Material Safety Law

3.Enforcement Regulations of Electrical Appliance and Material Safety Law

4.Explanation on type classification