Can the ASUS laptop model F83se burn discs?

Yes, you have to be able to

Just don't burn it too often, optical drives are parts that can easily go wrong, and that's true for all brands.

Listed in July 2009.

Processor Prize Error Correction Intel Pentium Dual-Core (Penryn) T4200 (

The core architecture is rewarded with error correction penryn

Processor Type: Prized Error Correction Pentium.

Processor clock speed 2000MHz

CPU internal cache with prize error correction L2 1M

Motherboard chipset Rewarded Error Correction SIS M672+SIS968 System Bus Rewarded Error Correction 800

Mobile platform with prize error correction is not a Centrino platform.

Operating System Bonus Error Correction Windows Vista Home Basic Storage Device Memory Capacity Prize Error Correction 2GB

Memory type: Prize error correction DDR2

Maximum supported memory Rewarded error correction 2 memory slots, maximum capacity supports 4GB hard disk type Rewarded error correction SATA hard disk.

Hard disk parameters: 5400 rpm with prize error correction.

Hard disk capacity 500GB with prize error correction

Optical drive type Reward error correction *** recorder.

Display screen.

Look if the optical drive is marked with RW or DW, which means that it is burned.

Nero burning software can be burned, in fact, it is very simple, open the software and see the interface will operate. Click on a ** logo to make an audio disc. Note that what you are talking about is to listen to it in the car, preferably**on the Internet**, the first song will lead to**different formats, **different flavor speeds cause you to hear the feeling of high and low in the car****.

Hello! If the optical drive supports burning, you can purchase a burning disc according to the type of burning drive supported by the optical drive, and then use burning software to burn the file, burning software, which can be nero, etc.

First, put the burning disc into the optical drive, second, open the interface of the program nero7, select the format you want to burn the disc (CD, ***, VCD) at the top, and select the format you want to burn. Third, click on the taskbar (Contain, Make Data, Make, Make. Make Audio) Select one you want to do, the burn interface appears, add the files you want to burn, and then click burn, and you're good to go.

Drive a device directly into the disk, and then click the right mouse button to write the file such as cd, click below it, and the computer itself is carved.

First of all, the optical drive is a recorder, and then there is a burning software.

It is a burner that can burn *** CD discs. If you want to see the details, here's how:

How to determine whether it is an optical drive or a recorder and check the performance information of the recorder: To determine whether you are installing an optical drive or a recorder, because there is no unified model naming standard in the country, manufacturers have their own lines, so it is difficult for some recorders to see whether they are recorders from the model, as well as the supported disc categories, burning categories and other information. The most reliable thing is to use burning software to view your optical drive information.

1.Use "Disc Burner": Open the software, select "Disc Information", you can view all the information of the optical drive (recorder) you have installed, and the one that is checked is supported.

2.With the Nero version: Open the software, select "Other—Get System Information", and in the window that appears, you can see the type and model of the optical drive (recorder) you have installed, the maximum speed for reading and burning, and the type of disc you support.

The one that is ticked is the one that is supported. Write ***-r dl before the checkmark, that is, support d9 *** double-layer burning discs.

You can use software such as Master Lu to detect the hardware of the whole machine and see the test results.

Consult with an engineer to help you solve the problem!

It has an effect, and after adding the memory module, the reaction speed will be significantly faster. When adding a memory module, pay attention to the frequency and voltage of the new memory module that is consistent with the original memory module. There are two ways to check the model number of a memory module:

Method 1: Check the memory module model of the notebook with the help of hardware detection software. There are many computer hardware testing software, including Master Lu, Driver Genie, CPU-Z and so on.

Method 2: Check the memory model of the laptop in the BIOS. If you feel that it is more troublesome to check the memory model of the notebook in the computer, you can also enter the computer BIOS to view, you need to restart the computer, and then enter the BIOS, to view the relevant hardware information, in addition, like the XP system, when the computer is turned on, the hardware self-test will be carried out, and the memory model information can also be viewed from the boot interface.

Add the total memory to 4G or above,For the existing use environment,It should be able to improve a lot of performance,I have an ACER4920G,It's 08 years,It's estimated that your time should be about the same,Now it's 4G memory,Running win8+office2013 is completely stress-free。 The daily office speed is very comfortable.

The *** RW drive of the notebook optical drive has a burning function, which can burn *** and VCD discs.

Steps: 1. Double-click the *** RW drive and follow the prompts to put the blank burning disc in.

2. You can name this CD. Here you choose something similar to a USB flash drive for easy reuse.

3. After the next step, start formatting the disc.

4. At the end of formatting, enter the CD.

5. Follow the prompts to drag the file into the disc folder.

6. File copy process.

7. After the copy is completed, right-click on the *** RW drive and click Eject. When you're done burning, remove the disc and finish burning.

Laptops can burn discs. The steps to burn a disc are as follows:

1.Prepare a recordable CD, which can be purchased on the computer**, and is generally a one-time burned disc.

2.Open the files on my computer and select the files you want to burn on the CD.

3.Then click the right mouse button and select Send to, *** RW drive.

4.The computer will then automatically prompt you to insert the CD you want to burn, and the drive will be opened automatically.

You need to insert the prepared CD disc, and then the computer will automatically burn it.

Laptops require an optical drive with a burning function to burn discs.

Here's how:

1. The notebook is equipped with a burning disc drive (disc burner).

2. Prepare a blank disc, select a blank disc according to the size of the burning file, burn the file less than 700MB with a CD disc, the CD blank disc capacity is 700MB, burn the file larger than 700MB less than, use *** blank CD, *** blank disc capacity.

3. The computer is using the Windows system, there is no need to install external burning software, and the Windows system itself contains the function of burning software.

4. Right-click the image file you want to burn.

5. Click: Burn the disc image.

6. Put the blank disc into the burning CD drive, check in front of the verification disc after burning, and finally click: Burn 7, the burning verification disc is completed, and the burning CD will automatically pop up the burning CD compartment door.

You first have to figure out if your optical drive does not support the burning function, use Master Lu to detect it, and if it does, just go to the next burning software from the Internet.

rRead w Write Insert the blank disc directly and drag the file to the disc letter on the line.

Laptops can be engraved with discs, and the specific operation you can do with your own computer instructions.

Here's how:

Computer burning. 1.Open "My Computer" on the desktop of your laptop, find the file you want to burn, click and hold it with the left mouse button, and then click Share in the menu bar (as shown below).

2.Click "Share" in the menu bar to enter, you will find "Burn to Disc", click to enter (as shown below):

3.At this time, put a "blank disc" in the automatic ejected optical drive (as shown below).

4.Then enter the title, then select the disc type, click OK after selection, and you can wait for the disc burning to complete (as shown below).

Software burning. 2.First, put the burning disc into the recorder, then open the burning software, and select "Burn Data Disc" in "Rip and Burn" (as shown below).

4.to the disc content interface, as shown below, "Add[e].Open the window to find and select the folder you want to burn, as long as the disc can be loaded, you can add as many files here as you like (as shown below).

7.Go to the final burn settings, take a look at the current burner selection, and the name of the disc can be changed, etc., and then "burn" (as shown below).

8.Next, the burning data disc software will automatically run the program, wait for a while, and finally a prompt will appear that the burning is completed, and the burner will eject the engraved disc at the same time, and the burning will be completed (as shown below).

9.In this way, a folder on the computer is successfully burned to the disc in the form of data, and we can put the disc back into the CD drive, pop up "My Disc", and click to enter "Open Folder to View Files" (as shown below).

10.At this point, you will be able to see the folder data placed in the disc (as shown below).

When buying a computer, if the computer has a burning function, it is generally given a burning software, such as Lenovo's power2go, Asus's nero, and Samsung's nero should be fine.

The operation is very simple, after putting the burning disc in, organize the files you are going to burn in the nero software, and execute the burning.

The notebook can be burned if it burns the CD-ROM drive, and the Kangbao CD-ROM drive can only burn CD-R, and if it is *** burn the CD-ROM drive can be burned***

Please consult your notebook configuration and manual.

If your optical drive has an engraving function, you can engrave, but it is best to use Nero engraving software to engrave.

1. First of all, check whether the optical drive is a burning optical drive, method: desktop - select the "My Computer" icon - right-click the mouse - manage - computer management - device manager - click to open the window on the right "*** cd-rom drive" - display ***-rom is an ordinary optical drive, display ***-rw, ***-ram is a recorder;

2. If you burn the CD-ROM drive, you can burn the disk, and Windows 7 comes with a burning tool. Put the blank disc into the optical drive, put the things you want to burn together, select all, right-click to "the location of the optical drive", and then follow the prompts step by step.

Of course, if you want to burn software, there are many people who generally use nero, and it is powerful!

Personally, I recommend you to use nero. This is simple and practical (alcohol 120 is also very good, carved mirror image and the like). Windows Vista 7 comes with its own CD burning, but it is not easy to use and has few features.

Vista can be burned directly without knowing other operating systems. Of course, to burn a disc, your optical drive is CD burning or *** burning, and it is OK to burn the optical drive and burn the disc.

Whether you can burn a disc or not depends on the brand of your computer. You need to determine whether the optical drive on the notebook has a burning function.

1. Double-click the "My Computer" or "Computer" icon to enter the following interface.

2. If the name of the optical drive icon is marked with "rw", it can be judged that it supports optical drive burning.

3. Further determine the attributes of the optical drive. On the optical drive icon, right-click and select Properties

You can see the settings tab for recording, and you can be sure that this drive supports disc burning.

This depends on whether the optical drive support is not supported, the software only needs to install the relevant ones, but the optical drive must be supported on the hardware.

This depends on whether it has a *** optical drive, and now many computers generally do not have an optical drive. Some styles are available.