The home is upgraded with telecom 8M fiber, and TP link WR941N cannot access the Internet

Based on your description, if you're sure that there's nothing wrong with your router, it's likely that your router isn't set up. The steps below are as follows to set up the connection between the wireless router and the modem

One: the connection of the router hardware.

1.First, connect the network cable on the modem side to the WAN interface on the router (this interface is usually colored or positioned to distinguish several other interfaces with the same appearance).

2.In addition, prepare a network cable to connect to any of the four LAN ports, and the other end to connect to the computer network port. (Skip if using wireless).

3.Connect the modem and the power cord of the router, turn on the switch (some brand devices will start automatically after connecting, no switch), and the hardware connection of the above router is complete.

2. Connection settings of the router.

1.Log in to the router settings screen

Open the browser and enter the router login address in the address bar, the login address is different for different brands, but most of them are or check the label on the back of the router or the router manual).

2.Enter the login username and password, the default username and password please check the label or manual on the back of the router.

3.After entering the password correctly, you will enter the settings interface of the router, and the router that has not been set will automatically pop up the settings guide interface.

4.After selecting the connection method, click Next, and the interface of entering the broadband username and password will appear, and the username and password filled in here is provided by the operator when handling the broadband.

5.After filling in the correct username and password, click Next, the connection of the router has been completed, if you need to access the Internet through wireless mode, please see the next wireless connection setting method.

Three: How to set up the wireless connection.

1.Turn on the wireless connection function, set the wireless connection name, and other options are usually default.

2.Set a password for the wireless connection.

3.Turn on the wireless network card on the computer to find the set wireless network name, click Connect, and enter the set password to connect normally.

Anhui Telecom will serve you wholeheartedly, I hope mine can get yours.

If you have any questions, you can consult the staff in the online business hall of Anhui Telecom, and Anhui Telecom has officially opened 4G services.

You can go to the online business hall to check the details, I wish you a happy life!

Try changing the dialing method on TP.

Dear users, TP-Link TL-WR847N is a router, and the connection between the telecom fiber modem and the router is shown in the following figure:

After making sure that the connection is correct, use a network cable to connect one end to the LAN port of the wireless router and the other end to the network port of the computer. Then type or press enter in the address bar of your computer browser.

Enter admin in the "Username" field and click the "Login" button to enter the wireless router settings interface. Generally, the IP address and username used by the wireless router are entered in this way, and there will be a label on the back of the wireless router.

In Current Network Configuration, select Manual Settings, and in Internet Connection Type, select PPPoE (Username and Password) Connection Type.

In PPPoE, first select "Dynamic PPPoE", and then fill in the username and password dialog with the password you used to apply for ADSL.

Another setting in PPPoE is "Connection Mode Selection", select "Always". This mode ensures that your wireless router will automatically connect as soon as it is turned on, so you don't have to manually establish the connection. You can also click "Add New Schedule" to automatically connect to a more detailed time configuration.

Finally, set up a terminal (such as a mobile phone or laptop) to verify the password when connecting to a wireless network.

How you set it up.

How do you go online without routing?

See if it's wrong there, if your password is wrong, if not, clone the address in the WAN port settings, save it, and try it.

Are you using a broadband connection to dial-up Internet when you're not connected to your router?