Which is better, Hpworth or George Fischer underfloor heating pipes

It should be a little stronger, because Hyworth is the largest Wavin plastic pipe company in Europe, which specializes in plastic pipes, and George is also European, first of all, the scale is not comparable, and then the highlights of these two companies are mainly PB pipes, and the use of PB raw materials in Hpworth accounts for nearly half of the world's use, which is also a lot behind George, and then George's company's main business is to make valves, and plastic pipes are a sideline. And now there are only pipes for floor heating, and its material products are not available for the time being, which is not comparable with the main plastic pipes of Hpworth, but it is worth affirming that George's pipes are also good, and they entered the Henan market relatively early, and the market operation can also be high, and the popularity of Shanghai Privos is not as good as George in the market popularity.

Of course, Georg Fischer's, the best high-end brand on the market, with a high market share and better service. For more than 200 years of Swiss brands, PB, PE-RT and other products were the first to be produced.

Of course, it is George Fischer's, with more than 140 wholly-owned subsidiaries around the world, which Hypworth cannot compare.

There is no doubt that it is Hpworth, Hpworth is the world's largest pipe manufacturer, George is incomparable, the production time of PB pipe is many years earlier than George, is the only practice in the world to prove that the service life is 50 years of pipeline.

Materially: Hypworth is stronger. Hypworth specializes in plastic pipes, while George's floor heating pipes are a side business, and there are no other supporting materials yet.

In terms of popularity: George's promotion efforts are really good, and its own quality is good, so it is well known and used by many businesses, and Hypworth has done a little less in comparison, on the whole: both are good, as long as you want to use that kind of decoration.

George's, George's is also more used than Hypworth.

Hpworth is the earliest manufacturer of floor heating pipes in China, but there are relatively few advertisements, but it is more cost-effective.

Hepworth is good. Absolute warranty of 50 years.

Well, I'm telling you it's George's.

At present, the most mainstream pipes sold in China are also the best quality pipes, which are basically the only choice in the mid-to-high-end market. However, their raw materials are all imported, the production standards are the same as those of European factories, and most importantly, Georg Fischer is a brand that does not add any ** materials, which few factories can do at present.

Generally, George tubes are also domestic, and they are the same as domestic ones.

George's pipes are divided into two types, domestic and foreign. As far as I know, the quality of the products that George factories send to foreign countries is okay because of their high requirements. To put it bluntly, the defective products that are left behind are picked by others, and they can only be hehe.

***。But **expensive. Ask Jingfeng HVAC specifically.

Georg Fischer is currently the first to produce plastic pipes, with a brand history of more than 200 years. The product quality and brand effect are well-known. Shanghai Liujiashan Environmental Science and Technology ****.

Not good, installed this spring, no temperature at all after testing the water in winter, at first I thought it was the reason for the heating company, the heating workers found that it had nothing to do with the heating company, and then went to find a local dealer, he came to the door to put the gas once, said that the next day was warm, waited for two days, or not warm, and when I went to him on the third day, he changed his face, said you go home to measure the temperature of your home, I said that the heating company said that I could not find out the reason for the heating fee and installation fee, You also came to see the situation, you also asked me to measure the temperature, and then he said in a very bad tone, then what do you let me do, then wait, I'll go and dismantle it for you, a dealer, I want to ask your conscience, I installed your floor heating, is to believe in your home, you don't help me find the reason why it is not warm, or in fact, you already know what the reason is, this is your attitude to solve the problem, and now you have changed your home to reinstall the radiator, otherwise the old people and children here in Henan can't stand it in winter, George Fischer The ** businessman of a county-level city, I will feed the dog with these floor heating money.

Georg Fischer, Switzerland +GF+

GF+ is a Swiss specialist for automotive products and piping systems.

Since 1802, 20 years of Chinese market development history, 50 years of plastic pipe product innovation and R&D technology, 140 years of experience in the production of pipeline system products, 200 years of brand and history. Hunan Changsha Hongyue HVAC ** has been this brand for seven or eight years, and you can find it by searching for them.

Summary. Georg Fischer underfloor heating pipes are good. The advantages are as follows:

1. Good energy saving. Underfloor heating requires only 35 50 meters of water temperature, which can be reduced by 2 3 compared to traditional convection heating under equivalent comfort conditions, and every 1 reduction in the average indoor temperature can save 10% of the system's energy consumption.

Georg Fischer underfloor heating pipes are good. The advantages are as follows: 1. Good energy saving.

Floor heating only requires a water temperature of 35 50 per cent, which can be reduced by 2 3 compared with traditional convection heating under the same comfort conditions, and every 1 reduction in the average indoor pure hand temperature can save 10% of the system's energy consumption.

2. Healthy and comfortable. Touching and underfloor heating evenly dissipates heat from the entire ground upwards, which is in line with the health philosophy of traditional Chinese medicine of "warming the feet and cooling the top". Even in the middle of winter, you can walk barefoot on the floor and watch your baby crawl around the noisy room without worrying about catching a cold.

It is also helpful to alleviate the old cold legs of the elderly. 3. Good hygiene. Evenly dissipated underfloor heating can avoid dust caused by convection of cold and heat, and the resulting respiratory infection and transmission; In addition, the lower room temperature reduces the evaporation of moisture in the indoor air, resulting in better indoor air quality.

The floor heating pipe is the pipe laid on the ground to ventilate and generate heat, which is the most important part of the floor heating device. Now the floor heating pipe on the market is Georg Fischer floor heating pipe, which is the most beam, and is welcomed and respected by everyone. So let's take you to know how about George Fischer floor heating pipes?

As well as some of the routing methods of Georg Fischer underfloor heating pipes.

Georg Fischer underfloor heating pipe advantages::

Outstanding flexibility for application at lower ambient temperatures.

Extremely low flexural elastic stress and thermal expansion force, which is convenient for construction.

After the pipeline is damaged, it can be repaired by fusion welding, without metal parts.

It can be used in conjunction with Georg Fischer polybutylene (PB) hot water and high-density polyethylene (HDPE) cold water piping systems to achieve the upgrading of all-plastic piping systems.

It can be added according to the user's requirements to prevent the permeable oxygen layer.

It can be supplied according to international or domestic standards according to user requirements.

Pay attention to technical details to improve the efficiency of use.

The laying of underfloor heating pipes can take many forms. However, it must ensure that enough heat is supplied to the room and meet people's requirements for comfort, so the choice of routing form and pipe spacing should be based on the specific situation, and cannot be the same.

The method of routing the Georg Fischer floor heating pipe

Spiral routing method.

Uniform ground temperatures can often be generated, and the pipe spacing can be adjusted to meet the special requirements of the local area. Since the pipe is only bent 90 degrees when using spiral routing, the material is subjected to less bending stress, so we recommend this method.

Roundabout pipe and pipe routing.

Ground temperatures are usually produced that are high at one end and low at the other. In addition, when routing pipes in this way, the pipes are bent by 180 degrees, and the bending stress of the material is high, so we only recommend using it in small spaces.

Mixed pipe and pipe method.

Due to the complex and diverse structure of the room, in addition to the above-mentioned typical routing methods, hybrid routing methods are also often used.

Spiral roundabout pipe routing.

Manifolds. The manifold is an essential component in a floor heating system. Georg Fischer's manifold is equipped with a flow control device on each circuit, so that the flow rate of each circuit can be adjusted separately, so that the temperature of each room can be easily adjusted individually, and the balance between different length circuits is also very simple.

Floor heating is a kind of heating device that uses the entire ground as a radiator, so that people can achieve the purpose of heating in the cold winter, which is generally more common in the north of China. As the most important part of the whole floor heating device, the quality of the floor heating pipe determines whether people can get enough warmth, so it is recommended that you may wish to consider the George Fischer floor heating pipe when purchasing the floor heating pipe, because the George Oak Fischer floor heating pipe is reassuring.

You can get it for free

Swiss brand, Chinese called George Fischer, English trademark + GF+, founded in 1802, more than 200 years of history of European industrial group, the oldest enterprise in the HVAC industry, the founding enterprise of pipeline products.

Georg Fischer has production bases in the United States, Germany, Switzerland and China, and the current domestic floor heating pipes are produced by the Chinese base, which is the mainstream brand of the high-end in China and has the highest market share. Their advantage is that they are of good quality, and they completely adopt the same raw materials and production standards as foreign countries, and do not add any first-class materials.

Without adding ** materials, only Georg Fischer is the only one who has publicly committed to it in China.

British, produced in China.

Georg Fischer is produced in China.