Mechanical Keyboard Selection Puzzle Solve!

Updated on number 2024-02-09
13 answers
  1. Anonymous users2024-02-06

    I am an Interstellar 2 player, a P and T player, and I also use a lot of mechanical keyboards. Exactly your question.

    Don't consider cherry under the budget of 500, nothing more than g80-3800 (mx-board, this keyboard is hacked out of the machine bar, I have one, it is indeed worse than the mechanical keyboard of the same price, don't think about it, unless you like to eat advertising effects.

    You should choose the blue shaft and the brown shaft if you pursue the feel, but to play SC2, red and black are more suitable, and relatively speaking, the black shaft has more feel than the red shaft, after all, the elasticity is good, as long as your hand is not particularly boring, the black shaft should be your first choice, and most professional players use the black shaft.

    As for the appearance, in fact, mechanical keyboards are generally low-key, and that can't be considered monotonous......

    i-Rocks IK3-DK is a black switch mechanical keyboard based on the 6251 red switch mechanical keyboard. (Any 6 keys are rollovered).

    The i-Rocks IK3-WE is a membrane keyboard based on the 6260 membrane keyboard. (There is a good anti-flush only in the designated area, and some areas even have a 3-key punch).

    A film, a mechanical, ** gap is of course large.

    So if you choose in your "tendency", there is actually only one you can choose now:i-rocks ik3-dk (the little gang master is currently using this.,It is said that it feels good.,The worm heart battle made by the little gang master** is played with this keyboard.,You can go and listen to the sound)

  2. Anonymous users2024-02-05

    cherry is not very suitable for games within 500 must be selected 3800 This keyboard keycaps are thin, without steel plates, and the mechanical keyboard feels different, if it is not a special preference, it is still not recommended.

    Kaiku 104 108 is within 500, and the cost performance is off the charts.

    Ducky 2108 has good workmanship and a big brand.

    The noppoo choc is good-looking and has good workmanship.

    These three (four) should be no worse than i-rocks, and of course they have their own emphasis.

  3. Anonymous users2024-02-04

    500 is not up or down, Kaiku 108 bar, the cost performance is OK, if the keypad usage is not high, you can consider 87, and the rest of the money is equipped with keycaps.

  4. Anonymous users2024-02-03

    What is a mechanical keyboard:

    Black Axis is suitable for playing CS games.

    Under 1000, there are Cherry, Cyre, Razer, and Filco.

    You can check it out.

  5. Anonymous users2024-02-02

    I like the budget of the cherry blue shaft 650 is basically hopeless, and the last cherryg80-3000 black shaft is about 660.

  6. Anonymous users2024-02-01

    First of all, if you start from scratch like me, you have to start from the lowest level, let's take the first few weeks.

  7. Anonymous users2024-01-31

    I'm too tired to play 3D games, and I've been playing this 2D round of Q all this time. Dao game, it feels pretty good, you can try it.

  8. Anonymous users2024-01-30

    Iron Asura Durandot Ultimate Edition.

    Has a cooler appearance There is also a full keyboard backlight breathing lamp On this** The quality, workmanship and feel are stronger than a widow is not a star and a half Although it is a non-mainstream mechanical keyboard But the general peripheral forum has a good reputation for this brand.

    It depends on the appearance that you are actually tangled up, so this should suit you The key is that the quality is really good, and the noise of the blue axis is quite loud, and you can also choose the red axis, which feels lighter than the black axis, but the trigger is still very sensitive.

  9. Anonymous users2024-01-29

    If you want to pursue the appearance, the widow is a good choice, at the same price, there is still a ducky 9008s backlit keyboard, this should be the largest shipment, and there are a little more choices in the color of the lamp If you want to buy the regular version of the blue switch, it is better not to choose Razer.

  10. Anonymous users2024-01-28

    The black shaft is not tired, don't be scared by some people with kidney deficiency;

    If the widow doesn't bring a lamp, it's better to look at the Tang monk;

    Personally, I feel that the passage of the tea shaft is very unpleasant, like something stuck, and I am not afraid of noisy or green selection.

  11. Anonymous users2024-01-27

    The landlord compares Filco with Cherry and Sairui...

    Black Widow is not on the same level as these ...

  12. Anonymous users2024-01-26

    The choice of mechanical keyboard should first choose the shaft body, green switch: suitable for typing, very cool, strong sense of paragraphs, loud sound, the experience is completely different from the membrane keyboard, suitable as the first mechanical keyboard, not suitable for playing games.

    Brown Axis: Weakened green axis, weak sense of paragraphs, quieter voice, more modest, playing games and typing.

    Red axis: There is no sense of passage straight up and down, it is more comfortable to press softly, the sound is smaller, you can play games and type, and the shortcomings are easy to touch by mistake.

    Black axis: The heavier red axis, without a sense of paragraphs, goes straight up and down, because you need to press hard for a long time, your fingers will be sore, which makes up for the shortcomings of the red axis that are easy to touch by mistake, and is suitable for playing games.

    Most people as the main keyboard are to choose the brown switch or red switch,If you haven't experienced it before and want to do it in one step, it's better to give it a try,Because different people's preferences are not the same。

    Then what brand to choose depends on the budget, within 300 is generally domestic casual, anyway, except for the appearance, everything else is not very good.

    More than 300, you can choose the original cherry switch keyboard, the cheapest is Gigabyte K83, **about 320, and the more expensive is ikbc's C104, about 400, these two are relatively cheap cherry switch keyboards, but there is no backlight, some people may not like it.

    If you have a budget of 500+, you can consider Corsair, the red backlight punisher is about 500-600, and if the budget is higher, you can go to K70

    As for the cherry original keyboard and big f in the back** is a bottomless pit.

  13. Anonymous users2024-01-25

    K70 Lux RGB backlit mechanical keyboard.

Related questions
10 answers2024-02-09

General solution: A total of 789 numbers are needed to compile the pages of this book, and it is estimated that the total number of pages of the book should not exceed three digits. Since it is no more than three digits, it can be calculated by classification. >>>More

8 answers2024-02-09

1.Because he went to the penguin shop to eat, the taste was different from what he had eaten before. Only then did he realize that he had eaten not penguin meat, but his wife's meat. In order to save him, his wife cut off the flesh from his body and cooked it for him to eat. So with deep guilt and shock, he committed suicide ...... >>>More

7 answers2024-02-09

First of all, the business ideas of each store are different. (Take your peers in one sentence, don't belittle others.) Then patiently explain to the customer. >>>More

14 answers2024-02-09

English and Spanish are very useful, depending on which language you will be exposed to in the future, but since you don't know any English, I think it's better to learn Spanish, because Spanish doesn't have a phonetic transcription, which I think is easier to learn than English. Nowadays, English is a very popular language, and even the salesperson who buys clothes in the market can speak it very well, so what is the point of learning it from now on, and it will never be able to catch up with the countless good ones. On the contrary, there are not so many people who learn Spanish now, so wouldn't it be better to find their own advantages from it? >>>More

6 answers2024-02-09

The efficiency of the injection molding manipulator is much higher than that of manual work, and it is also more cost-saving, and it only needs power supply to work continuously without rest. The manipulator can pick up the piece for 3 seconds, and it is not afraid of being hot. According to reports, Bronte's injection manipulator has used a lot of patents, and the efficiency is much higher than that of other manufacturers' injection manipulators.