How to get rid of wood borers in simple ways

Updated on home 2024-02-09
12 answers
  1. Anonymous users2024-02-05

    Easy ways to get rid of wood borers:

    1 Pharmaceutical treatment.

    When the wooden cabinet is infested by insects, dichlorvos and water can be used in a ratio of 1 5 to prepare the liquid, spray it comprehensively with a sprayer, let the liquid infiltrate into the wooden cabinet, spray 3 times 5 times in a row, after 8 hours, it can kill all the moths. After that, wash the wooden cabinet with clean water and dry it.

    2 Rub with diesel.

    On a sunny day, place the wooden cabinet that has been eaten by insects in the morning sun, and paint all the wooden cabinets with a brush or cotton yarn dipped in diesel oil. Dry for two or three hours and then apply it once, and then dry it again, until you see the moth dead at the mouth of the hole. Then wash with laundry detergent and dry.

    Wood borers are a more difficult pest to deal with. In order to prevent the invasion of wood, it is necessary to take care of every process, from the raw material of wood to the processing of wood into finished products, to avoid infection. Always keep the environment clean and remove dead trees and waste wood.

    Applying paint or varnish to the surface of the wood, sealing pores, cracks, etc., can prevent the laying of eggs by wood borers.

  2. Anonymous users2024-02-04

    I've encountered it, but it's just a bed frame, and every day in the dead of night, I'm tired of "Titica".

    I started to touch the medicine and it didn't work, so I found a thin wire, a screwdriver, and the like After half an hour of hard work, I finally caught three small white worms, but the bed was almost there

    I suggest a good idea: find the location of the bug first, and then prick it with an awl! Refill the medicine!

  3. Anonymous users2024-02-03

    Put a few more mothballs in the right places. The smell will smoke the bugs away. The smell is non-toxic.

  4. Anonymous users2024-02-02

    It can only be covered with a large plastic cloth and then fumigated with medicine.

  5. Anonymous users2024-02-01

    Find a company that specializes in insect control, there are a lot of them on the Internet, they are not expensive and professional, and they will not be used indiscriminately and will not be harmful.

  6. Anonymous users2024-01-31

    Spray diesel fuel on the surface of the wood.

  7. Anonymous users2024-01-30

    Throw it away, the easiest way.

  8. Anonymous users2024-01-29

    Put them in the coldest place in winter and freeze them to death.

  9. Anonymous users2024-01-28

    Keep your home and environment clean and dry, and regularly clean and inspect wooden furniture and building structures. 2.Use moths, such as insecticides, to apply to the surface of wood products or spray them in the air to prevent the infestation infestation.

    3.Use natural mothproofs, such as mothballs, eucalyptus balls, etc., and place them near wood products such as wardrobes and pumps to prevent the invasion of moths. 4.

    Apply paint or lacquer to the surface of the wood products to prevent the infestation from entering. If there is already an invasion of borers, use the following methods: 1

    Use an insecticide spray on the affected area of the hand to crack the known to kill the borers and eggs. 2.The affected wood products are placed in sealed bags and treated with high or low temperatures to kill the borers and eggs.

    3.With gas insecticides, affected wood products are placed in sealed bags and treated with gas insecticides to kill moths and eggs. Please note that when using pesticides or gas exterminators, they should be used according to the instructions on the book and avoid harm to the human environment

  10. Anonymous users2024-01-27

    Summary. The best way to eliminate wood borers: on the corners of some wooden boards and bamboos that have not been damaged, paint them with raw tung oil, shellac paint or varnish, etc., and paint them with a layer to isolate the board from the air and achieve the purpose of preventing moths.

    When the wooden furniture is infested by insects, take out the clothes in the wooden cabinet, prepare the liquid medicine with dichlorvos and water in the ratio of 1 5, spray it comprehensively with a sprayer, let the liquid infiltrate into the wooden cabinet, spray 3 times 5 times in a row, after 8 hours, it can kill all the moths; After that, wash the wooden cabinet with clean water and dry it.

    The best way to eliminate wood borers: for some wooden boards that have not been damaged The corners of the bamboo, use the traces of life with tung oil, shellac paint or varnish and other coatings, and paint a layer of limbs and fingers, which can isolate the board from the air and achieve the purpose of preventing moths. When the wooden furniture is infested by insects, take out the clothes in the wooden cabinet, prepare the liquid medicine with dichlorvos and water in the ratio of 1 5, spray it comprehensively with a sprayer, let the liquid infiltrate into the wooden cabinet, spray 3 times 5 times in a row, after 8 hours, it can kill all the moths; After that, the state hunger wood cabinet is washed and dried with clean water.

    The fastest way to kill woodworms is to expose them to the sun.

  11. Anonymous users2024-01-26

    Hello, dear, I have helped you find the results: the best way to eliminate wood borers: 1. Pharmaceutical treatment, when the wooden cabinet is moth-eaten, you can use dichlorvos and water to accompany the medicine in a ratio of one to five, spray it with a sprayer, let the liquid medicine penetrate into the wooden cabinet, spray three to five times in a row, and kill all the borers after eight hours, and then wash the wooden cabinet with clean water and dry.

    Second, wipe with diesel, on a sunny day, put the wooden cabinet that has been eaten by insects in the morning sun, use a brush or cotton yarn dipped in diesel, and re-paint and dry it again for two to 3 hours, but if you see the moths dead at the mouth of the hole, you can wash and dry it with laundry detergent. Wood-boring is a more difficult pest to deal with, to prevent it, it is necessary to start from wood raw materials, to wood withering processing, finished products, etc., each process needs to be paid attention to avoid infection, often keep the environment clean, the dead trees and waste wood are removed, and the wood surface sealing system, cracks and other paint or varnish can avoid wood-boring insects from soft production.

  12. Anonymous users2024-01-25

    Pro-1The pharmacy replied that when the wooden cabinet was moth-eaten by insects, it could be accompanied by dichlorvos and water in a ratio of one to five, and sprayed with a sprayer to let the liquid infiltrate into the wooden cabinet, and it should be sprayed three to five times in a row, and all the moths could be killed after eight hours, and then the wooden cabinet would be washed and dried with clean water. 2.

    Wipe with diesel, put the wooden cabinet that has been moth-eaten in the morning sun on a sunny day, dip it in diesel with a brush or cotton yarn, and re-paint and dry it again for two to 3 hours, but see the moth Qingyuan die at the mouth of the hole, and then wash and dry it with laundry detergent.

Related questions
8 answers2024-02-09

Ammonia is an alkaline object, which is different from the burning corrosion of acidic objects, and alkaline objects are destructive and penetrating, and cannot be removed with an air purifier. The correct way is to put a match in the sewer and let the gas **, so that the ammonia is purified. For residual ammonia on the surface of the room, it can be burned with fire or dried with fire.

19 answers2024-02-09

Smell of cigarettes in the room.

You can light a few candles in different places in the room to quickly disappear the smoke and smoke, or you can use a towel dipped in thin vinegar and wave it indoors a few times to take effect, if you spray thin vinegar with a sprayer, the effect is better. >>>More

9 answers2024-02-09

3 ways. 1. After changing the name, click File Replacement, browse to the file location and click Replace, and then save. >>>More

17 answers2024-02-09

Step 1 Method: Start by double-clicking to open PhotoshopCS4 >>>More

12 answers2024-02-09

Click "Start" - "Run" in the bottom left corner of the desktop, and then type "DXDIAG" Enter, which will launch the DirectX diagnostic tool, and you can see the current version number to the right of the "DirectX Version" entry in the lower part of the "System" tab. >>>More