The computer is stuck after it is turned on, and the computer is stuck after it is turned on

Your phone is still responding to power on or charging, so it can be repaired, don't worry, but first ask a few questions, 1Can I remove the battery and put it on again? 2.

How long has it been on the boot page without any changes? 3.Can't you restart it after trying it many times?

5.Did you open a lot of software or a game with a high memory usage before your phone crashed? However, I think you may have a program open when the other party called, so the phone memory is insufficient, and the phone called again, and finally let the system crash, the system needs to delete some programs to reduce memory occupation, accidentally deleted the necessary programs, generally speaking, it is the desktop system, sound system, picture system, page system, because the phone can not find the system, so that the phone can not operate normally, so that it crashes, which is called "mobile phone no system".

Of course, it can be recovered by some methods:The first is to press and hold the power button and the volume boost key when the phone is turned off,These two keys must be pressed at the same time,Of course, this method is that the mobile phone has a flashing system,If you don't have it, you can only turn it on,And it's still dead on the boot screen。 The second is for people who have an SD card and a card reader, you can insert the card reader into the computer, wait for the desktop in the computer, take out the card reader after it is good, put the SD card on the machine and restart it.

The third is that the computer can still receive mobile phone requests, you can flash the software in the computer, but you have to look at the mobile phone model it supports and follow the steps to do it, otherwise there will be particularly serious consequences. There are certain risks associated with this approach!! Choose carefully!!

The fourth way is to go to the mobile phone repair point to repair, which is a very low-risk life-saving method!

I only want to help others, not in return, I hope your phone can be repaired, and I hope mine can give you some help o(o

Hello! Welcome to the Coolpad Enterprise Platform.

Hello landlord, try to operate according to the following methods, but it will empty the information of the mobile phone:

1. In the shutdown state: press and hold the volume up, volume down, and power buttons at the same time, and wait for a while for the phone to enter recovery mode (red exclamation mark, Android robot interface).

2. Press the power button again to enter the "Android System Recovery" menu

Note: "Volume Down Button" is a scrolling menu, and "Volume Up Button" is to confirm execution.

There are a total of 8 menus as follows:

Reboot System Now--- Reboot the system immediately.

Wipe Data Factory Reset ---Erase Data Area to factory reset.

wipe cache partition --- wipe the cache.

Backup User Data --- backs up user data.

Restore User Data --- restore user data.

Recovery Mode].

1.Through the volume down button, select "Wipe Data Factory Reset", and press the volume up button (to enter the next interface);

2.Press the volume down button, select yes--delete all user data, and press the volume up button to restore and clear data.

3.Through the volume down button, select "wipe cache partition" and press the volume up button to execute;

4.Reboot the system when you're done.

Have a great day!

1) Slow boot or stuck:

Don't operate it immediately after booting up, because the program is loading when you boot up, and you will try it in operation later, if it takes too long, look at the following method.

You disconnect the network cable and try to turn it on, if there is no problem, it is caused by slow boot networking, and it has nothing to do with the system (if it is a network problem, try to set a fixed IP).

If it is not caused by slow networking, first soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, don't install them if you find something that isn't suitable (if it's a hardware problem, please overhaul it, such as hard disk, etc.).

2) It may be that there is something wrong with the disk, please fix it (fix it for each disk or only fix C).

Built-in disk repair method:

The specific steps are as follows: select the drive letter in my computer, right-click to select the properties, select "Tools Start Checking" in the pop-up drive properties window, and select "Automatically repair file system errors" and "Scan and recover bad sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options (after doing it according to the above method, a box will pop up, the point is, repair after automatic shutdown at boot, win7 select the disk check button according to the plan).

Bad sectors on the hard drive will lead to corruption or loss of computer system files, computer failure to boot or freeze. Hard disk bad sectors can be repaired using NDD Disk Utility or Scandisk.

If the fault persists, please restore the system or reinstall it (it is still not possible to format the hard disk and repartition and reinstall it, if it doesn't work, you will have to replace the hard disk, or overhaul it).

3) If this is always the case, first soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, don't install anything that doesn't fit (if you have any questions, please ask me).

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

4) In terms of hardware, such as hard disk, memory, etc., whether there is a problem, whether the temperature of CPU and other hardware is high, if it is caused by hardware problems, it is recommended to overhaul it.

It may be a problem with the motherboard.,The motherboard will get stuck when it's burned.,There's also a possibility that it's a bad program.,You rush to do a program to see if it's bad.,That's the problem with the motherboard.。

Is there more detail? The scope of the question is too large.

For example, what kind of software is installed? Are there any other problems, what kind of configuration, have you ever had the same problem before?

Reinstall the system, or your computer configuration is too low?

Is the heat dissipation function not good?

It could be that your computer has a virus or a malicious plug-in, or maybe you have too many boot items.

Many people have such an experience, after booting into the desktop, anxiously click on the icon, but after clicking on it, there is no response from the stupid Hongpi, and the source is until more than a minute later, the program you need to jump out slowly, which is really annoying. In fact, this is caused by the fact that the computer does not have an IP address, and after the computer is turned on and enters the desktop, it continues to search for available IP addresses in the background, which takes more than a minute, and this process hinders the operation of other programs.

It should be noted that when a stand-alone dial-up Internet access, do not fill in the IP, or fill in the wrong one, it has no impact on the Internet, but in the LAN network (using a router to access the Internet is this type), it can not be filled, either it is automatically obtained, or the correct IP address is filled in to access the Internet.

If you are a beginner user and are still confused about the concept of IP address after reading the above instructions, please keep it as it is and do not change it indiscriminately, otherwise it may cause you to get on the Internet without a difference.

What exactly it looks like depends on your location, there should be a program to automatically fill in the IP on the Internet, and you can also find a professional to help you see. Since it's a new purchase, it's not a big loss to reinstall the system.

In addition, it may have something to do with too many plug-ins in your computer.,It's best not to go down any network plug-ins.,Automatically installed and deleted.,It is recommended to kill the virus immediately after each time.,Don't think about deleting it directly if you have a problem.。

Antivirus software is recommended Nordun Kaspersky. It is recommended that the cybersecurity software Kaka Security Assistant.

- Me too. I'm a program that sets up an automatic connection to the Internet. Now it is estimated that you can play after 10 seconds after turning on.

The specific steps are:

1. Right-click "Online Neighbors" - Properties;

2. In the "Network Connection" window that appears, right-click adsl (depending on what you name it for, that is, the one that is not a "local connection" is generally a "broadband connection"), right-click, and click "Properties";

3. In the properties dialog box that appears, click "Options".

4. Remove the check mark in front of the "prompt name, password and certificate, etc.", and click "OK" to exit;

5. Copy the ADSL icon on the desktop to the "Startup" of the start menu, if there is no icon on the desktop, you can set the broadband connection as a desktop shortcut in the network connection. That's it.

The next time you start the computer, Windows will automatically start the dialer program for you, so you can go directly to the Internet without dialing up again. Crack balance.

If it is a Windows 7 system, open the browser - Tools - Internet options - connect Select "Always dial the default connection", then disconnect the network after searching, and then open the browser The connection dialog box will pop up, and you can choose to connect automatically.