How to repair a children s bouncy castle slide if it is broken Children s bouncy castle

How to repair a broken children's bouncy castle slide Children's bouncy castle adhesive glue Glue with soft glue Non-hard glue.

If the bouncy castle slide cloth cannot be slipped, it is likely that the surface of the fabric is attached to garbage or stains, or it is stored in a humid or hot environment, resulting in dust or hardening on the surface of the fabric. Here are a few things you can consider about it:

1.Wash in warm water. You can clean the bouncy castle slide cloth with warm water, which will help remove dirt from the surface and restore its smoothness.

Make sure to use lukewarm water (not hot water) and neutral cleaners that are free of alcohol, benzene, and oil-based materials. When washing, gently wipe with a sponge dipped in detergent and wash it off with clean water. In addition, you can use a cloth to gently wipe dry after the task is over.

2.Wash with alkaline detergent. If warm water doesn't solve the problem, you may want to consider using an alkaline detergent, such as sodium carbonate.

Add sodium carbonate to water and mix well, then apply to an inflatable castle slide cloth, gently scrub with a brush, then rinse with clean water and let dry.

3.Store dry. Inflatable castle slide cloth should be stored in a dry, ventilated environment to avoid water and mildew on the surface of the fabric. When in storage, make sure that the bouncy castle slide is completely dry and tied with ropes to avoid loosening.

The above are some ways to deal with bouncy castle slips and make a chati cloth, it is recommended that you pay attention to safety and choose the appropriate method according to the actual situation. Before operating, please read and understand the product with caution and follow the product instructions.

The inflatable slide will only be softer if it is inflated all the time, and there is no safety hazard to play.

Because the inflatable slide bouncy castle itself needs to have a place for air leakage, be inflated all the time, have a place for air leakage, and have air intake and outlet, so as to maintain elasticity. The safety factor of these inflatable products is still relatively high, and the air cushion is soft, even if you accidentally fall, it is not a big deal.

Bouncy Castle Inflatable Trampoline Soft PVC Mesh Rubber Boat Children's Swimming Pool Bonding Patching Glue for filling holes.

Soft PVC special glue.

YH-T885 Clear, Soft, Non-Hard, Tough, Special Glue.

Generally, the problem will not be very serious, you can try it with glue first. You still have no repair materials, you need two things, one is PVC mesh cloth (this is the fabric used to make bouncy castles), and the other is bouncy castle repair glue (you buy second-hand, it is estimated that there are no two. If you need it, Lexin Amusement can send you some free of charge.

The specific method of patching is as follows:

1.Clean up the area you have scratched first, there is no water, and the area to be prepared for treatment should be slightly larger than the area where you have scratched it out by 5-10 cm.

2.According to the shape of the scratched place, cut a piece of PVC mesh cloth with a similar shape, and apply glue on the mesh cloth, not too much glue, apply evenly, and the area to be repaired in the bouncy castle is also coated with glue, not too much, and apply evenly, do not rush to paste, first dry for a while, and then stick when it is half dry, so that the strength is high, and basically you can use it immediately.

3.Glue the PVC mesh cloth to the area to be repaired, pay attention to flatten the area of the bouncy castle to be repaired, so that there will be no bubbles when sticking, and then press the side hard to bond firmly.

4.If the weather is too cold, you can use an electric hot air for a while, or you can not do it.

If you want to be stronger, you can take a needle and thread yourself before pasting and repairing, sew the cut area, pay attention to the stitches are tighter, or sew two threads.

Go find a place to repair the bike, polish the outside a little, and then stick a piece of rubber on it with glue, and the glue will dry and repair.

Bonding, repairing, filling holes, bouncy castle glue, no hard and soft glue.

As long as it is not deliberately broken or worn out by regular use, it is generally stronger.

Repair method: First, look at the location of the damage, if it is in the corner, it is recommended to cut the repaired material into a round piece, or according to the texture of the material, cut into a long strip of oblique stubble, the wide band should be moderate, too narrow and not firm, too wide and not sticky. Generally between 3 and 5 cm is fine.

Second, clean the surface of the damaged place, there is too much dust will also affect the effect of the glue. Apply glue to the damaged surface and then to the back of the patch. This kind of cloth is generally different from the front and back, which can be clearly seen.

3. After applying glue, after a short while, put the two pieces together, you can find a small scraper to scrape back and forth, and do not leave air bubbles. If the weather is cold or humid, the glue is not easy to function, you need to use the kind of hair dryer that blows your hair, and you can use a hot breeze to stick it firmly. It can also be repaired in the middle of the day when the temperature is relatively high.

Under normal circumstances, it can be used normally after a few minutes of gluing. Therefore, it is completely okay to use it while maintaining it in the process of use.