What is the volume of a standard swimming pool

1. The pool length is generally 50m, and the allowable error is +. At the end of the pool can be installed the electric shock plate timer, (electric shock plate specifications: , placed at 30cm on the water surface of the pool wall at both ends.

Immerse yourself in water for 60cm. The surface of the board is brightly colored and marked with the same marking line as the pool wall marker. The total length of the pool is 50m, the length of the short pool is 25m, the total length of the short pool is 25m, and the allowable error +.

2. The width of the pool is 21m, and the Olympic World Championships require 25m. 3. Water depth and water depth requirements. The walls of the pool at both ends are from 30cm above the water surface to 80cm below the water.

Can be set up on the pool wall within the depth of the water surface, and the table width is 10-15cm.

50 meters long, 25 meters wide, 2 meters deep, 50 * 25 * 2 = 2,500 cubic meters

The volume of a standard swimming pool is 2250 cubic meters (

The standard swimming pool is 50 meters long and 21 meters wide.

The official competition pool is 50 meters long, at least 21 meters wide, and the water depth is more than one meter; For swimming, diving and water polo.

Pools for comprehensive use, water depth meters; The depth of the pool with a 10-metre jumping platform should be 5 metres. The pool water temperature should be maintained at 27-28 ° C. Filtration and disinfection equipment should be in place to keep the pool water clean.

Freestyle:

1. In the freestyle competition, any swimming style can be used. However, in individual medley and medley relay competitions, freestyle refers to the removal of butterfly.

Swimming styles other than backstroke and breaststroke.

2. Every time you turn and reach the finish line, a certain part of the athlete's body must touch the pool wall.

3. During the entire swim, a certain part of the athlete's body must be exposed to the water. After the start and each turn, the athlete is allowed to be completely dewatered, and the athlete's head must be exposed to the water before 15 meters (inclusive).

The standard swimming pool is 50 meters long and 21 meters wide, the Olympic World Championships require a width of 25 meters, and there are also swimming pools called short pools that are only half the length of 25 meters.

The water depth is greater than meters.

The swimming pool is generally 1050 square meters.

The official competition pool is 50 meters long, at least 21 meters wide, with an area of 1,050 square meters and a depth of more than one meter.

Pools for swimming, diving and water polo combined, water depth meters; The depth of the pool with a 10-metre jumping platform should be 5 metres. The pool water temperature should be maintained at 27-28 ° C.

Filtration and disinfection equipment should be in place to keep the pool water clean and clean. The width of the pool bank of the swimming pool is usually not less than 5 meters at the end of the departure platform, and the rest of the pool bank is not less than 3 meters.

For the official competition pool, the shore width of the starting platform pool shall not be less than 10 meters, and the width of other banks shall not be less than 5 meters. The International also has a 25-metre swimming pool competition.

Structure of the swimming pool:

a) It is directly excavated on the ground to form a pond Qi Pei.

b) is to place the pool on the floor of the building. In the former case, the side pressure of the pool wall receiving water and the side pressure of the backfill. When the pool is deep and empty, the wall is actually a retaining wall, and the bottom of the pool is under pressure.

If it is overhead or on the floor, the pool wall needs to be structurally designed, and the solid masonry (high elimination but not overhead) pool wall should also be treated according to the structural needs. <>

If it's a cube, it's the side length multiplied by the side length.

In the case of a cuboid, it is the base area multiplied by the height.

If it is a cylinder, it is the base area multiplied by the height.

If the infiltration wheel is trapezoidal, the sum of the two base areas multiplied by the height divided by 2 e.g. There is a rectangular swimming pool. It is 2 meters deep, 20 meters long and 10 meters wide.

Pls How many cubic meters of water can a rotten pants swimming pool be injected? Cong Lixin.

2 20 10 400 cubic meters.

The volume of this pool is 400 cubic meters.

The volume is equal to the volume, the length is multiplied by the width of the water, and the circular polygons are calculated according to the formula.

Question 1: What is the standard size of an indoor swimming pool? 10 points Standard swimming pool.

There are spectator seats for competitions and no spectator seats for practice. The size specifications and equipment of the pool should meet the competition standards. The plane size of the general pool is 21m x 50m, and the water depth is 1 8m.

Standard plunge pool.

There are two types: with and without auditorium. But the specifications and equipment requirements of the pool are in line with the competition standards. Plane size 21 5mxl5m, water depth: 3 5m 5m, with diving platform and springboard.

Other types 1) Ordinary swimming pool There is no limit to the plane shape and size, and the water depth is not limited, and the general water depth is about or so.

2) Fancy swimming pool with a plane size of 30m x 20m, with 12mxl2m, water depth guarantee.

3m。Other parts .

3) Water balloon pool The plane size is 33m x 21m, and the water depth is 1 8m.

4) Diving pool Plane size 3 6m x 5m, water depth 1 5m 5m.

5) Wave Pool The plane size is 25m long and 5m wide. The water depth is about 1 5m.

6) paddling pool (children's pool, water slide) The plane shape and size are not limited, and the water depth is about lm.

Comprehensive pool The comprehensive pool is to achieve the purpose of a pool for multiple purposes, increase the area of the pool, the depth of the pool has changed, and set up a deep water area and a shallow water area to meet the requirements of different swimmers. In terms of scale specifications, the pool surface and water depth are greater than or equal to the standard pool specifications to meet the requirements of competitions and exercises. Separate the water surface from the depth (with buoys or water nets, for pools of different ages, different swimming skill levels, and different swimming requirements.

Question 2: What is the approximate size of the swimming pool? Count the squares, the length and width, and subtract the extra ones.

Q3: What is the size of a standard swimming pool and how much does it cost? The standard swimming pool is 50*25 meters, and the cost is about 80-1 million.

Question 4: A swimming pool covers an area of 100 square meters, and several such pools cover an area of one hectare n=10000 200=50

50 such pools cover an area of one hectare.

Question 5: A swimming pool covers an area of about 2000 cubic decimeters.

Question 6: The ground area of a swimming pool is about 180, how much is the water depth, and what is the depth of the water is about 180 The sentence is not smooth, and I can't understand it! The quantity is not clear, and you can't see what you are asking! Let's get into the water!