What is the function of circulating pump side bypass water processor

Remove impurities in the circulating water system due to atmospheric capture, surface peeling of pipe fittings, and flocculation of impurities in the water supply. Protects the circulatory system from deposition, fouling, etc.

The scope of sewage is wide, mainly depending on the status of pollutant substances in sewage. If the pH in the sewage is too high or too high.

If the direct discharge right is low, the pH of the receiving water body will be changed, and then the life activities of aquatic plants, microorganisms or animals will be inhibited, and the water quality will deteriorate. or if N and P are seriously polluted, it will lead to the proliferation of algae in the receiving water, and the proliferation of algae will make the water body appear hypoxic, thus making the water body smelly and black; Or industrial sewage contains heavy metals, which are discharged into the water body and eventually endanger the health of animals or humans with bioaccumulation. Therefore, sewage treatment is still of great benefit to the society, and in general, sewage treatment is of great help to the environment we live in and our physical and mental health.

Diversion and filtration, the orderly exchange of hydraulic oil pressure energy in the hydraulic system is carried out, and the circulating filtration of hydraulic oil is carried out again to filter out harmful impurities.

It is mainly used to filter the garbage generated by the wear of power components and actuators in the hydraulic system.

When the filtration of the hydraulic system itself is ineffective, a bypass filter is added to filter again. It purifies the oil and protects the actuators.

This should be the category of boiler water treatment, because condensate reuse is a good energy reuse, composed of a water collector and a circulating pump, Jinrun Environmental Protection Technology Water Treatment believes that the condensate of the water collector is injected into the preheater of the boiler by using the pressure of the circulating water pump. Without a circulating pump, the condensate would not be able to return to the pressurized steam system and would be treated in an in-line manner and could not be reused.

Therefore, the circulating pump plays a role in boosting reuse.

Circulating pump refers to the circulating liquid pump that transports reaction, absorption, separation, and absorption liquid regeneration in the device. It has a low head and is only used to overcome the pressure drop in the circulatory system. Low-head pumps are available.

The circulating pump refers to the role of the pump, and the centrifugal pump refers to the structure of the pump, and the two are completely two concepts. The working principle of the circulating pump is to circulate the water, and the pump used is called the circulating pump, for example, the hot water in the plumbing and heating pipeline is circulated by the circulating pump.

Working principle: The working principle of the circulating pump is to circulate the water, and the pump used is called the circulating pump, for example, the hot water in the plumbing and heating pipeline is circulated by the circulating pump.

1. The circulating pump adopts excellent hydraulic model and advanced manufacturing technology, which greatly improves the performance and service life of the pump.

2. Because the shaft seal is made of cemented carbide and fluorine rubber mechanical seal, the reliability of pump operation and the temperature of the conveying medium can be improved.

3. The overflow part of the pump is made of stainless steel plate stamping and welding, so that the pump can be suitable for mild corrosive media.

4. The overall structure is compact, small in size, light in weight, low in noise, remarkable in energy saving effect, and easy to maintain.

5. The inlet and outlet of the pump are located on the same level as the pump base, which can be directly used in the pipeline.

6. Using standard motor, users can easily equip the motor according to their needs.

7. It can be equipped with intelligent protectors according to user needs to effectively protect the pump from dry rotation, phase loss, overload, etc.

Water supply: water plant filtration and transportation, water plant zoning water supply, main pressurization, high-rise building pressurization.

Industrial pressurization: process water systems, cleaning systems, high-pressure washdown systems, fire protection systems.

Industrial liquid transfer: cooling and air conditioning systems, boiler feed water and condensing systems, machine tool kitting, conveying acid and alkaline media.

Water treatment: ultrafiltration systems, reverse osmosis systems, distillation systems, separators, and water treatment systems for swimming pools.

Irrigation: farmland irrigation, sprinkler irrigation, drip irrigation.

Circulating pumps are widely used in industry, urban water supply, water discharge, and can also be used for farmland and orchard drainage and irrigation, and DAO is used for transporting clean water or other liquids with physical and chemical properties similar to those of the genus Qingshui. Split case pumps rely on the principle of centrifugation to pump liquid materials, and the split case pumps made of special materials are suitable for pumping corrosive liquids and liquids containing a certain amount of solid particles.

The circulating pump is horizontally installed, the pump casing is horizontally separated from the shaft line, the upper part is the pump cover, the lower part is the pump body, the suction inlet and the discharge outlet are on the pump body below the pump axis, and its center line is perpendicular to the axis. Except for the 48SAP-30 pump, which is a sliding bearing, the bearings of other types of pumps are made of rolling bearings, and the end seal of the bearing end cover adopts skeleton oil seal.

The shaft seal of the circulating pump adopts soft packing seal and mechanical seal.

The rotation direction of the circulating pump: from the motor end to the pump, it rotates in a counterclockwise direction, that is, the suction port is on the left and the discharge port is on the right. The drive end can also be moved to the other end of the pump according to the user's requirements, and at this time, the direction of steering, suction and discharge is opposite to the above.

The material of the main parts of the circulating pump: the flow parts of the pump are made of cast iron, if the user needs, the impeller can also be made of cast steel and brass, but it must be indicated in the order contract.

Hello, my family is using a circulating pump, generally speaking, it is good, if the home is a villa or a large square meter.

The house is recommended for use.

What is a Circulating Pump? I guess what you want to know is the role of the circulating pump! The circulation pump is mainly to solve the problem of slow hot water output.

Due to the long pipes of hot water, it is always necessary to run cold water for a period of time before hot water is available. After using this circulating pump, you can achieve the effect of hot water coming as soon as the faucet is turned on.

As for the working principle of the circulating pump you mentioned, this one is not difficult. To put it simply, it is to install a circulating pump to "suck" the cold water in the hot water pipe to the water heater and then heat it again. This is just a brief introduction, and there must be other details in it, such as the need to install a return pipe, temperature sensing device, check valve equipment, and so on.

My family just installed last year, with a can circulating pump, at first I couldn't figure it out, and finally their workers and masters explained it to me, and the service was quite good. Having said so much, maybe you still don't understand, the following gives a working principle diagram, and the water return device below is the circulating pump (the water return is another name for the circulating pump).

It can be seen from the working principle diagram given by the master of the workers that there is a return pipe at the farthest end of the hot water pipe, and the return pipe is connected to the circulating pump and then connected to the water heater. Among them, there is a temperature sensing device at the connection between the return pipe and the hot water pipe, when the temperature reaches the set value, the valve closes, and the hot water comes out of the faucet.

Circulating pump Anbai

It is installed on the return pipe, and the DU is generally equipped with a ZHI temperature controller. When the temperature of the water sensed by the temperature controller is less than the water temperature that you have preset, the circulating pump will start working. The water heater will also heat up the water at this time, and when the preset temperature is reached, the pump and water heater will stop working.

At this time, when the faucet is turned on, the water in the entire water pipe is hot, and the effect of hot water will appear. This mode, in which the temperature is pre-set and operated by a temperature controller, is called the temperature control mode. This model is generally suitable for boilers, water heaters, and places with a large permanent population.

This is because the water use in these places is more irregular. The advantage of this method is that it is ready to heat and can be used at any time. The disadvantage is that the energy consumption is relatively large.

Circulating pump principle:

There will be a temperature control inside the copy circulating water device, and the circulating water device will be installed under the water heater, and the water inlet will be connected back to the water heater in series to form a loop. When the temperature control induction water is lower than your preset temperature, the circulating pump will start, and the water heater will ignite to heat the water when it senses a water flow, and when the temperature is reached, the circulating pump will stop, and the water heater will also stop. The water in the whole circuit is hot, so the effect of turning on the faucet will have hot water coming out.

This is a temperature control mode: set a sensing temperature, and the circulating pump will start to activate and notify the water heater to start when it senses that the temperature on the return pipe wall is lower than the set level. This is called temperature-controlled mode.

It is suitable for boilers, water heaters and villas, because of the large resident population, the hot water time is not regular.

Hello, to prevent impurities from entering the circulating pump in the system, it will lead to damage to the circulating pump, Changzhou Great Wall Heat Conduction Oil Furnace Company.

The role of the filter is to filter the dirt of the medium.

In the hydraulic system, the filter can be installed in five positions of the system, one of which is to be installed on the oil circuit next to the system, in parallel with the main oil circuit. It can be separately drawn from the main oil circuit and can also be installed on the oil return circuit where the relief valve is ready to open (commonly used). When installed on the return road of the relief valve, in order to prevent accidents caused by the system overload due to the filter blocking the cover scale, a safety valve needs to be connected in parallel with the filter.

The safety valve and the filter form a bypass filter group.