Newly installed system black screen 100, newly installed system black screen

It may be a hardware problem, and now that it's hot, it may be that the graphics card doesn't dissipate heat very well. (Because if it's a software issue, you can't get it right sometimes).

After uninstalling the graphics card driver, the graphics card does not have a driver driver, and the heat generation is not so great, so it will not fail.

So it is recommended that you check if the graphics card fan is working properly.

There must be something wrong with your graphics card, unplug it and check it well, maybe it's a circuit problem, try a different graphics card.

Has the hardware ever moved?

If you haven't touched it, it's a software problem.,It's recommended to reinstall the system.,After installing the system, install the graphics card driver first.,Then restart it to see if it works.。

It should be the problem of incompatibility of your machine's hardware...

It's a problem with your hardware, and you should ask about it when you bought a computer.

It's a system problem, what system are you installing, and the VSITA system has high requirements for hardware configuration.

What is your resolution.

You go into VGA mode and turn the resolution down.

You try to put it.

Method 1. 1. If there is no response when pressing the power supply, check the external power supply first, and then see if the motherboard is powered on, and if the light is not on, there is a problem with the motherboard.

2. If the motherboard can't be turned on if there is power, it is a problem caused by insufficient power supply and switching circuits, and it can be used on the meter side for one year.

3. If the fan is rotating but the display screen has no signal and the host does not have an alarm, it is a memory problem, you can unplug the memory card and then use the eraser.

Method two. There is also a reason that your system is not installed properly or a pirated system is installed, so it is recommended that you reinstall it.

When we reinstall the system, we sometimes encounter the situation that the system completes and enters the black screen on the desktop, what should we do at this time?

The first thing that happens is when the ghost system is installed on the brand machine, which integrates a universal driver, but sometimes the graphics card driver inside will be incompatible with the brand motherboard, resulting in a black screen into the system.

We restart the computer, press F8 when it is turned on, and enter safe mode.

Right-click "Computer" on the desktop in safe mode, and click "Device Manager" in the pop-up menu.

Find "Display Adapter" in the list on the right side of Device Manager, click the + sign in front of you, right-click on the graphics card model that appears, select "Uninstall" in the menu, uninstall the driver, and it will enter the system normally.

If the system fails to be reinstalled, you must use the boot disk to boot to install, and the installation process is relatively simple

1. Before installing the system, you need to prepare:

1. Blank U disk (xp, 2g required; Win7, Win8, at least 4G, preferably 8G);

Second, after doing the above work, you can start to install the system on the target computer.

1. Insert the USB flash drive and use the USB flash drive to boot the computer. For computers in recent years, press F12 when booting, a list of startup devices will pop up, and you can select your USB flash drive to enter; For older computers, press del or F2 when booting up to enter the BIOS settings related startup items, different BIOS settings are different, please refer to the motherboard manual. After the boot is successful, it will enter the main menu interface, and select PE to enter).

2. After the PE system is loaded successfully, the ghost installation interface will automatically pop up, select the target partition (generally select C), and then click "OK" to start the system cloning.

3. After the GHOST process is completed, it will prompt you to restart the computer, restart it, and you need to unplug the USB flash drive when restarting (if you change the BIOS settings, you need to change it back to the hard disk to boot).

4. The next step is the fully automatic installation process, no human intervention is required, only need to wait patiently for more than ten minutes.

The system is not installed properly, try to repair the boot area.