What should I do if the screen flashes or goes black after the phone is in the water, urgent!! Fix i

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

After the mobile phone enters the water, the battery should be removed immediately, there is a blow dryer to dry, do not turn on the machine within 24 hours, if there is an ultrasonic cleaning machine, it is best to clean it, because there will be residual water, corroding the circuit board, if not, use a hair dryer to dry slowly with low hot air, keep it for 24 hours without turning on, let the water vapor evaporate.

If the phone is relatively high-end, it is recommended to go to the mobile phone store to repair it, remember not to try to turn it on again to see if it has improved.

After drying it, wait a few hours to see if it doesn't work, so you can only take it for repair.

Hello dear, what should I do if the phone is flooded and the screen shakes Steps:1First of all, we immediately salvaged the phone from the water2

Then wipe each part of your phone with a clean, soft rag or paper towel (gently pat your iPhone with your hand to drain excess liquid)3Then hold the phone upright, with the charging port facing down, and use a hair dryer to quickly dry the phone. 4.

After drying, we quickly turned off the phone.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

If your phone gets flooded and the screen is flickering, you can follow the steps below:1Shutdown:

Turn off your phone immediately to avoid short circuits or other damage caused by continuing to use the power supply. 2.Remove the battery (if removable):

If your phone has a removable battery, try to remove the battery to prevent battery damage or a short circuit in the current. 3.Wipe clean:

Gently wipe the phone case and screen with a soft, dry cloth or paper towel to remove any moisture from the surface. 4.Dry treatment:

Place your phone in a ventilated and dry place, either in a dry environment, such as in the sun, or with a hair dryer (low setting) to dry it. But avoid overheating or using high temperatures. 5.

Test without booting: After ensuring that the phone is dry, try to test whether the phone is normal without turning it on. Plug in a charger or connect to a computer to see if it charges properly or is recognized.

6.Seek professional help: If the flicker screen problem still exists, or other faults occur, it is recommended to contact a professional repair shop or mobile phone manufacturer as soon as possible to repair the vertical eggplant for further testing and repair.

It should be noted that it is important to be cautious when handling the water ingress phone to avoid further damage to the phone. In addition, water can easily cause short circuits and damage after entering the phone, and there is no guarantee of 100% repair, so dealing with it as soon as possible can increase the possibility of repair.

If the phone is turned on, please press the power button to turn it off; If your phone is turned off, don't try to turn it on. Remove the SIM card and microSD card. You need to bring your mobile phone to the local customer service center for testing, and there will be professionals to help you handle it properly.

The reasons for the splash screen can be summarized in several situations:

The network signal is unstable.

The current generated by the surface of the screen.

The flashed rom does not match the phone.

The radio baseband is not upgraded.

Hardware problems, the phone may be refurbished, and the screen may be defective.

Wiring issues. It is related to whether the original charge is used and whether the mobile phone screen is capacitive or resistive.

Problems with mobile phone data.

Open the phone cover with a phone screwdriver, dry it with a hair dryer, cover and tighten the screws, I hope it can help you.