How to Make a 3D Printed Model? 3D printing model making tutorial

This question is relatively simple, and there are several ways.

The most commonly used is to use professional software modeling, such as CAD modeling.

I hope I can help you.

Wukong Printing Workshop is to do 3D printing services, you can model, print, as long as you send the picture to them, select the material to print, after the printing is completed, it is still very convenient.

1. Vase 3D printing model tutorial: Step 1: Open the vase 3D drawing with PROE and check if the 3D drawing is something you need to print. Step 2: Convert the 3D picture to the printer's format, generally we convert the 3D picture to STL format.

2. The D printer production tutorial is as follows: build the frame first, build a frame according to the size of the CAD model, and change the size of the parts and the required number for different parts.

3. Prepare 3D model drawings to imitate friends; 2: Convert 3D printing format; 3：

copy to a memory card; 4: Insert into 3D printer; 5: Feeding 3D printing filaments; 6：

Select the model to be printed; 7: Start the printer; Generating a digital model is the first step in the 3D printing process.

4. Printing: According to the above process, after the 3D data is completed, the 3D data is repaired through the data processing poledevs before 3D printing, the best printing angle is placed, the support is added, and then the format file for the 3D printer is exported to the 3D printing equipment, and the white model of the figure can be entered into the 3D printing equipment to do a good job of production.

3D printing has the following process steps:

1: Prepare the 3D model drawing;

2: Convert 3D printing format;

3: Copy to memory card;

4: Plug into the 3D printer bucket to ignite;

5: Feeding 3D printing filaments;

6: Select the model to print;

7: Start the printer;

Generating a digital model is the first step in the 3D printing process. The most common way to generate a digital model of a hole is to utilize computer-aided design software (CAD). There are a large number of free and professional CAD programs that are compatible with 3D printing.

Reverse engineering can also be used to generate digital models from 3D scanning.

There are several design considerations that must be considered when designing for 3D printing in the void. These are typically focused on feature geometry constraints and support or escape hole requirements, and can vary from technique to technology.