Laptop ingress with water. T T, the laptop fan is flooded, and the T T is not turned

The motherboard is burned, send it for repair!

1.Don't be anxious and afraid of water ingress Unplug the power supply immediately and remove the battery. (Remember, never test or plug in the battery power before booting it).

2.Use a hair dryer to blow the surface of the keyboard, to move and blow, do not blow a little, otherwise it may blow the keyboard badly, and it will be worth the loss!

3.Take the machine to a repair shop and bake it in a professional oven at a temperature above 80 degrees for a few hours before cleaning the watermark on the motherboard with alcohol.

4.Turn on the computer with an external power supply (remember that it is an external power supply, not a battery).

5.After booting, look at the self-test process, if the self-test is too slow, shut down immediately, it is possible that the main version has been short-circuited, don't keep waiting.

6.If the self-test goes well, then congratulations, the main components are fine, 7 Don't have a fluke mentality Use a hair dryer to blow the surface is dry and you can use it When you turn on the machine or two or three days and a half a month A month The machine may have some hardware hanging!The more you charge, the more the motherboard will be corroded.

Send it to overhaul, it is estimated that the line is a little problematic.

Send it for repair. Generally, you should wait for 1 day before turning on the machine to make sure that all the water is dry.

Also, the blowing temperature should not be high, otherwise the motherboard will be burned out.

My computer has been flooded several times and is in normal use.

Let's go to the after-sales service to take a look. This one is more reliable.

Do preliminary drying first, you can use facial paper, hair dryer If it affects normal use, send it to the designated customer service for maintenance Do not disassemble it yourself

What a machine, dismember it yourself and dismantle it to solve the problem.

After the laptop enters the liquid, you should immediately unplug the power supply, and then disassemble and clean up the motherboard, keyboard, and parts that enter the liquid, etc., and then turn on the test after cleaning up.

In Beijing, I will help you to test for free to make sure, and it can be repaired on the same day.

If you are not in Beijing, it is recommended that you find a reputable and skilled maintenance company to help you overhaul.

This kind of problem cannot be solved even if it is said in words. No matter how detailed you say, you don't know what your situation is.

It is recommended not to turn it on. Or send it to the repair point.

If you know the circuit, you can change it yourself, and if you don't understand it, go to the store to fix it!Don't make it worse.

Will I change it?No, please find a tutorial. The cost of a fan is 10 yuan. It's OK to buy a cheap one. 100's is definitely a black heart... I played with the book myself. Don't know how to ask me.

Most of the time it's not the fan, you're rightly worried. Because the circuit of the fan is too simple, it is possible to short circuit unless it is soaked in water, and the design of the notebook, the fan is not attached to the bottom surface, so it is unlikely that water will enter the bottom surface to affect the fan.

The fan is flooded, I don't understand it, and there is no other place? If you don't turn the fan, it's fine.

The notebook must be disassembled in time to dry the circuit board with a hair dryer, otherwise it will corrode the circuit board, causing the motherboard to be scrapped and the loss will be great.

Take it to after-sales... It is very likely that the solder joint is desoldered. Just let him repair the motherboard.

Wrap the keyboard with toilet paper, blow it with a hair dryer, dry the moisture, blow it after a day, don't turn it on, and start it for two days, first of all, the battery will be down.

It is recommended that you find a technician to help you do deep cleaning and drying, and clean all the parts with liquid ingress After testing, the keyboard failure is mostly due to liquid ingress corrosion and damage, and you need to replace a new keyboard at your own expense.

You should take it to the store to take a look, it is turned on too early, and some people can't see it.

Even though it's good to use now, some of the places where the water enters are not dry, so it will corrode the components or plates after a long time, you know. If there is a problem at that time, it will need to be repaired, and it will be more expensive.

I've had experience with that. At that time, I told my daughter that the computer was in water, and she actually laughed at me and said that my head was in water. This one.

Although there is nothing about the computer now, it is difficult to talk about it later. I'm just a user, and I'm not a repairer. Talk of experience.

The built-in keyboard can't be used, and it must be related to water ingress. You've soaked it. After soaking, you don't deal with it and turn it on, you're strong! Hehe.

There is no problem with the instructions for starting the machine, but because the power is not cut off in time after the water is entered, and the short circuit caused by the boot, it is recommended to take it to the monopoly to check it, because some electronic components will be reduced if they are damaged due to the short circuit of water ingress.

It's best to clean it immediately to the place where the computer is repaired, although it is blown dry, but it is not absolute, the water will slowly corrode the computer motherboard, and wait until the computer can't turn on, and then it's too late to repair.

Cool for at least 3 days, in a ventilated and dry place, or in a sunny place. Do not expose to direct sunlight.

There is a greater chance of burning. As soon as you pour it into the water, don't move the machine, there is a waterproof membrane under the keyboard. At this time, you have to quickly and long press the switch to forcibly shut down.

Then unplug the power supply and remove the battery. Then, take a paper towel to absorb water, then remove the keyboard, and then blow an electric air on the keyboard and motherboard.

When you try to press the power button, even if it was good before, when you press it, there is a 90% chance of burning it.

Finally, one more word, since LZ has carried out a series of wrong operations. Then it depends on whether your book is in the warranty.,If it's still in the warranty.,Carefully dispose of the water marks in the keyboard and motherboard.,Then,Send it to the repair station.,The rest,I don't say.,LZ You should understand.。

When disassembling, find some reliable screwdrivers, don't mess the screws, those black screws, if they are removed with white marks, a small amount can be painted with a thin black oil-based marker. I used to do these things every day when I was in a computer company.

Water ingress is very random, and bad is possible. This water ingress must be removed from the motherboard to dry and clean the motherboard thoroughly, this kind of undisassembly is very risky, a lot of water and dust combined will slowly corrode the motherboard Incorrect treatment may have more and more sequelae, the power battery is unplugged Don't turn it on again. Disassemble the motherboard and dispose of it thoroughly.

If it is still under warranty, find a good technical actual dismantling, clean up all water stains, and then go to the after-sales service, do not admit that water can be guaranteed for free, and the technology of treatment is very important. You should find a good technical one to deal with water stains, motherboards, etc. It's a lot of processing, and as long as the technology is okay, it's going to be successful.

First of all, deal with this problem is not timely enough, when the situation occurs, the first reaction is to quickly unplug the power of the notebook, immediately flip the computer, and then immediately remove the battery and do not press any keys, especially the power button, this is a great mistake, the keyboard water computer will immediately cut off and the power supply of the motherboard plays a protective role, you force the power to turn on and reconnect the power to cause the motherboard to be burned out is more likely.

Secondly, after this situation, if you understand the computer, open the back cover and blot the water with a paper towel, do not disassemble if you don't understand, and then it is recommended that the computer be exposed to the sun for two days before turning on (the weather should be good), and wait for the water inside to evaporate a little safer, in this case you can only pray, I hope you deal with it in time.

If it doesn't work in a week, then you are ready to take it to the after-sales service!

It doesn't work much to blow the surface tube, first remove the battery, it's best to remove the keyboard, there may be water under the keyboard.

Wait for the water to dry and start the machine to try, if not, find a professional repair.

Hey, there's a better chance of burning, it's a pity, pray.

In fact, water poured on a computer generally does not burn instantly. The best solution is to unplug the power supply and unplug the battery without moving the computer so that the computer will be powered off immediately, and then flip the computer to control the water, then blow it with a hair dryer, and then turn it on for a day or two.

It's not too big, don't turn on the computer when it gets water, unplug the power supply and battery, and then blow it with a fan, remember not to disassemble it yourself, and find an irregular place to disassemble it, go to the after-sales service, as long as it doesn't pass the shelf life, it will be replaced for free or it will cost very little repair money, and if you don't go to the after-sales service, the motherboard will be more than 1000 mine is because I didn't go to the after-sales service, so it's miserable.

Bless it, I hope the motherboard is not burned, don't turn it on if the screen is already black, even if you dry it with a hair dryer, it will not last a few years Because it will corrode the circuit if it is not handled well, take it to repair it and let a professional help you repair it, bless it, Amen.

There is a great possibility that the motherboard will burn, and it will cost more than 1000 to go to the store to change the motherboard.

Take it to the repair point immediately, disassemble it and dry the motherboard and other parts inside, otherwise the motherboard will corrode after a while, and the loss will be great.

Turn it off, take out the battery, and if the range is relatively large, you have to remove it and dry the water in the chip.

Remove the battery immediately, turn it off, take it to a repair shop, and let a professional handle it for you.

Send it directly to your local easy-to-repair service store for processing, and never turn it on.

Take it for repair, what else do you ask?

This can only depend on luck, if there is water as soon as possible, it is best to unplug the power and battery immediately. Don't power it on again, take the motherboard out completely, clean it with board washer, and dry the motherboard to 100 degrees with a dryer. to power on again. Don't leave anything to chance.

The laptop is flooded, and after the user turns off the computer and dumps the water, there is no other treatment, and after leaving it for a period of time, the computer is turned on. Generally, there are two results at this time: one is that the machine cannot be turned on, and the other is that the machine can be used normally temporarily.

It is quite dangerous to re-power this kind of untreated water ingress laptop, and if there is very little water in, and it does not enter the motherboard and keyboard, the machine may be fine. But more often than not, after a few days or weeks of reuse, the laptop has a black screen again or cannot be turned on or some functions are malfunctioning, then the laptop is quite dangerous, and the repair rate is very low.

In this case, it's better to send it to a repair shop to repair it, don't look for a black shop, or just say something that is broken, you don't have to live (you have to pay a lot of money), find a better store to see, ask what is broken and then decide whether to repair it, because the repair of ** may be more than the money sold by the computer.

If you don't have to care about anything at that time, just unplug the battery, after a few days or disassemble it and then blow it with a hair dryer, it's fine, now it's water seeping into the motherboard, damaging the circuit original, only dismantling and repairing, the price may not be any, see what the damage is to the original.

If the laptop gets into the water, it can be repaired, and the repair cost is around 150-450. Free testing, repair is charged. If you are in Beijing, I hope I can help you! I have the information in my user profile.