How to deal with the cracks in the rubber, for several years, the cracks in the rubber, how to repai

1. First of all, do a thorough cleaning. First, use a vacuum cleaner to clean the dust on the surface of the floor glue, and then wipe it thoroughly with a semi-dry rag. 2. Dilute the strong wax removal water.

It is better to dilute it in a ratio of 1:10. 3. Evenly apply the diluted wax removal water to the floor glue and wait for 5-10 minutes.

4. Use a floor mopping machine for low-speed cleaning and wax removal, and clean up sewage when the liquid is changed to filial piety. 5. Wash it again with water to make sure there is no residual detergent on the floor glue. 6. Then use a new wax and a cleaning and glazing agent to treat the cleaned floor glue, and the renovation of the floor glue after rewaxing and polishing is completed.

1. There are many advantages of floor glue, such as good waterproof performance and anti-slip. For families with elderly people, it is very suitable to choose floor glue.

2. The foot feeling of the floor rubber is very comfortable, the texture is soft and the thermal insulation performance is also good, even in the cold winter, there will be no cold feeling.

3. It is more convenient to lay floor glue, compared with laying floor tiles or wooden floors, the laying of floor glue is much simpler.

4. The disadvantage of the floor glue is that the hardness is relatively poor, pay attention not to be scratched by sharp objects in the process of use, and do not smoke on the floor glue, the hot soot will also burn the floor glue.

5. The style of floor glue is relatively single, and compared with the tiles with a wide variety of patterns, the patterns and colors that can be selected for floor tiles are relatively limited.

Over time, the floor adhesive may become brittle and brittle, causing the floor adhesive to crack in the joints, which will not only affect the aesthetics of the floor, but may also cause the floor to fall off or be damaged. The following describes several common methods for dealing with the cracking of floor adhesive joints:

Replace the broken floor glue.

The easiest and quickest way to deal with it is to replace the broken floor glue.

The cracked adhesive strip needs to be completely removed with a knife or tool, and then the glue groove is thoroughly cleaned so that the new floor adhesive can be installed.

Make sure the groove is dry and clean before installing the new strip, and make sure it is evenly compacted and smooth when filling the new strip.

Replenish the floor glue.

If the damage is not severe, consider using flooring adhesive to repair it.

First, you need to cut off the broken floor glue with a knife, and then clean the glue tank and let it dry.

Using matching color and brand of flooring glue, fill in the voids in the crevices and smooth out the surface.

When finished, allow the filled strip to dry well to ensure its firm adhesion and aesthetics.

Use floor mats.

Another common way to deal with it is to use floor mats.

Floor mats are a ready-made product that prevents cracking of floor glue and are usually made of a soft material that adapts to the natural movement of the floor without breaking.

The floor mat is lifted into the glue trough and can be cut as needed when installing the new floor, and the floor glue board seam can maintain better and effective adhesion after proper trimming.

Replace the floor. If the floor glue is severely cracked or damaged, you will have to consider resurfacing the floor.

The new flooring will require the use of new flooring glue.

In this case, the best way is to hire a professional flooring installer who will provide professional services and ensure the quality and durability of the flooring installation.

Cracks in the floor should be repaired with touch-up paint and waxing on the surface of the floor.

If there are cracks in the paint layer on the surface of the floor, you can use sandpaper to polish the cracks, then use a rag to clean the floor, then use a dry rag to dry the floor, and finally touch up the paint and wax on the surface of the floor.

If the cracks in the floor are minor, the cracks can be filled with a mixture of wood of a similar color to the floor. If the cracks in the floor are severe, the only way to replace the floor is to replace it with a new one.

If the gap between the floors becomes larger, and the width of the gap exceeds two millimeters, the floor should be disassembled, and then part of the floor should be replaced with a new one, and then the floor should be re-laid on the ground. If the width of the gap in the floor is less than two millimeters, it does not need to be repaired.

You can identify whether the tile at the junction of the wall and the ground is smooth, if it is not smooth, it needs to be waxed in advance or pasted with some beautiful sewing paper and then glued, and in the process of caulking, you can not use ordinary caulking tools, you can choose some small specifications or special yin and yang corner caulking tools for caulking, and the caulking agent is strictly constructed in the gap, so that it is more perfect. Relevant knowledge development materials: 1. During the construction of Qingye, control the time of sewing glue, after all, the sewing agent is a quick-drying material, and it can be played 20 30 cm at a time.

2. The premise of the construction of the beautiful sewing beam is not to let there be open water in the gap, if you find that there is water in the gap, you need to clean the water with a dry cloth, and then use the sewing glue for beautiful sewing, and you also need to pay attention to a ventilation in the room after the sewing is not completed, which can help us to make the sewing agent dry and solid. 3. Each surface of the sponge of the sewing agent can only be used once, and can not be recycled, and the glue gun needs to be smoothed with a special scraper after the glue gun is finished, and can not be replaced by other scrapers, so that the construction will not have too much effect.

Summary. How to dispose of the ground seam glue is not sticky 1, use soap and a little ammonia and turpentine mixture, which can remove a lot of dirt and make the glass surface more shiny. 2. You can take a dry cloth stained with vinegar to cover the entire nail-free adhesive traces, and wait until the nail-free adhesive stains are completely wet, and you can easily remove them with a ruler.

3. When purging, whether you use glossing water or vinegar, you must let these supplies be completely soaked without nails to remove them easily and effectively! 4. You can also use heating to soften the adhesive of the nail-free adhesive: blow it with a hair dryer to soften the adhesive, and when the adhesion of the nail-free adhesive becomes weak, it can be easily removed.

If there are still small marks, wipe them off with polish remover that removes nail polish. 5. Repeatedly stick and tear with transparent adhesive with good viscosity, which can remove some of the surface.

How to dispose of the ground seam glue is not sticky 1, use soap and a little ammonia and turpentine mixture, which can remove a lot of dirt and make the glass surface more shiny. 2. You can take a dry cloth stained with vinegar to cover the entire nail-free adhesive traces, and wait until the nail-free adhesive stains are completely wet, and you can easily remove them with a ruler. 3. When purging, whether it is using glossing water or vinegar, these supplies must be completely soaked with nail-free rubber marks, so that they can be easily and effectively removed by closed mold infiltration!

4. You can also use the method of heating to soften the adhesive of the nail-free glue: blow it with a hair dryer to soften the adhesive, and when the adhesion of the nail-free glue becomes weaker, it can be easily removed. If there is still a small mark on the spine of the car, wipe it with polishing water that removes nail polish.

5. Repeatedly stick and tear with transparent adhesive with good viscosity, which can remove some of the surface.

Tile caulk should be used, because the caulking is not operated in accordance with the construction process, the joint mouth of the fill is uneven, and there are broken joints and black seams. If you want to repair the seam again, you can use the waste hacksaw blade to cross out the uneven caulk accumulated at the seam, and clean up the black seam in the scraping joint (be careful when cleaning the seam and do not damage the tile edge), and then touch the new caulk. It is recommended to find a professional construction personnel to do it, not professionals can not do it.

You can distinguish whether the tile at the junction of the wall and the ground is smooth, if it is not smooth, it needs to be waxed in advance or pasted with some beautiful sewing paper and then glued, and in the process of pressing the joint, you can not use ordinary caulking tools, you can choose some small specifications or special yin and yang corner caulking tools for caulking, and the sewing agent will be strictly constructed in the gap, so that it is more perfect.

1. During construction, control the time of playing Qingye sewing glue, after all, the sewing agent is a quick-drying material, and a rubber block can be beaten 20 30 cm, if it is too long at one time, it is likely to affect the aesthetics and dryness of the sewing.

2. The premise of the construction of the seam is not to let the water in the gap, if you find that there is water in the gap, you need to clean the water with a dry cloth, and then use the sewing glue for the sewing, and you also need to pay attention to a ventilation in the room after the sewing is not finished, which can help us to dry and solidify the sewing agent.

3. Each surface of the sponge of the sewing agent can only be used once, and it cannot be recycled, and the glue gun needs to be smoothed with a special scraper after it is finished, and it cannot be replaced by other scrapers, so that the construction will not have too much effect.