How to wire the smart remote control switch, how to pair the remote control switch

There are three steps:

1 Two black wires are connected in parallel inside the remote control switch. A neutral wire is randomly selected (the black wire next to it is connected to the neutral wire).

2 Another black and blue wire on the other side of the housing is connected at both ends of the load.

3. Connect the red wire to the switch on the wall, and then connect to the fire line.

The power supply is 12V, and the output is generally a relay. The equipment is connected in series on the common contact and normally open contact of the relay, and then the receiver is controlled with a remote transmitter, and the sound of the relay is heard.

home appliances and other fields. Wireless remote control and wireless transmission systems increase the degree of freedom of movement compared to wired and infrared devices.

In the first step, zero live wire installation, the power supply must be cut off first (live operation is strictly prohibited);

The second step is to connect the wires in the wall cassette to this product, and the wiring instructions for the binding post on the back of the switch:

L" binding post - the live wire connected to the 220V power supply;

N" binding post – the neutral line connected to the 220V power supply;

a" Binding post – the light line that connects the controlled luminaire;

b" Binding post - the light line that connects to another controlled luminaire;

The third step is to fix the base of this product in the wall cassette with two screws. The installation method is the same as that of a normal wall switch.

Hope it helps.

The pairing method of the remote control door remote control is as follows:

1. Clear code: Press and hold the lock key and the down button at the same time, and you can see that the indicator light is constantly beating. Just press and hold the button on the remote control, and you can see the indicator light lights up and then off, which means the removal is successful.

2. Copy: Take out the remote control that has been erased before, correspond the keys of the two remote controls one by one, and press the respective door opening buttons at the same time, you can see the indicator light flashing. Please note that this operation is the same as our Bluetooth transmission, and the two remotes must be close to each other to succeed.

The other three keys can be operated in the same way as the first button above.

How to choose the right electric door

1. When choosing an electric door, the most important thing is its performance. We have to look at the production materials, the hardness should be good, and the internal materials should be energy-saving and emission-emission-saving. Considering the above factors, it is best to buy a brand of electric door, so you must be very careful when choosing to avoid buying defective products.

2. In addition to considering the material and performance of the electric door, you should also pay attention to the information products and product descriptions of the manufacturer. Be sure to ensure that the manufacturer is regular, and the electric door meets the industry standard. Products.

Looking back on the service life again has a guiding role for us to carry out a reasonable maintenance plan, and it is also convenient for us to have a basis for protecting our own rights and interests when we encounter problems in the future.

The analysis is as follows: 1. The two black wires are connected in parallel inside the remote control switch, and one of them can be connected to the zero line (the black wire on the side is connected to the zero line on the figure).

2. The other black wire and the blue wire on the other side of the shell are connected to both ends of the load.

3. The red wire is connected to the wall switch, and then connected to the live wire.

Pro, the wiring method of the intelligent remote control switch is as follows:1First, connect the input of the smart remote switch with the power supply.

Generally speaking, there are two interfaces on the input, one is L (live wire) and one is N (neutral wire). Connect the L connector to the live wire of the power supply, and connect the N connector to the neutral wire of the power supply. 2.

Then, connect the output of the smart remote switch with the load. The output also has two interfaces, one is L (live wire) and the other is N (neutral line signal). Connect the L connector to the live wire of the load and the N connector to the neutral line of the load.

3.Finally, connect the remote control of the smart remote switch with the switch body. Generally speaking, there is a small receiver between the remote control and the switch body, and the receiver can be connected to the switch body.

Turn off the power of the remote control switch, and then turn off the main power supply. 2. Remove the wiring around the switch port and remove the bulb. 3. Connect the lamp with the live wire and neutral wire of the remote control switch.

4. The other end of the zero line of the remote control switch is connected to the line post of the outer screw port, and the other end of the live wire is connected to the inner line post of the lamp port. 5. Wrap the joint with insulating tape.

The remote control switch is one of the commonly used products in modern industrial or nuclear modern families, it consists of a movable remote control transmitter, and a switch receiver fixed on the wall, all functions can be operated directly on the wall switch, and can also be controlled remotely with the remote control.