The thousand year mystery of the mystery of the hanging coffin, about the mystery of the hanging cof

Most of the hanging coffin burial remains in China are located near mountains and rivers, and have a history of at least two or three thousand years (the latest is more than 400 years). In these thousands of years, the river course and landform may have undergone great changes, such as the Jiuqu River in Wuyi Mountain, Fujian, and the Shangqing River, a tributary of the Xinjiang River in Xianyan, Guixi County, Jiangxi Province, and the stone walls on both sides of the river, which have experienced the erosion of the riverbed by the river water in two or three thousand years, and it is entirely possible for the river water level to be lowered under the action of long-term natural forces, so the height of the coffin at that time will not be as high as what is seen now. In short, the view that most of the hanging coffins in South China have been elevated due to geological changes is of significance in the study of hanging coffins.

Everything was wrong. The mistake is that you assume that the hanging coffin fell down after it was completed below. Wrong! It didn't fall all at once. The ancients were not as stupid as some people, but they were made in caves.

The hanging coffin is not put in, but buried in, where there is a hanging coffin, there is a flow of water, in fact, a long time ago, the place where the mysterious hanging coffin was put into the place has a high layer of soil, people can carry the coffin up to it. But later, due to the movement of the earth's crust, the soil layer in some places declined, and after thousands of years of feng shui baptism, the coffin was slowly revealed, forming the hanging coffin we see now.

The following is purely a personal opinion.

Materials: wood, rope.

Operation method: 1. The wood is fixed on the floor and ceiling like beams and columns; Left and right respectively 3 (longitudinal column), the first root is close to the second root, the middle of the root can leave 10 20cm spacing, in the middle of the root to dig a circle and put the horizontal log. At this point, an H-shaped frame is formed (the middle beam should be pierced 20 cm).

2. Make 2 * shaped rudder handles at each end of the crossbar (1 fixed crossbar will not move left and right, and one will be used later). (Note: facing the direction of the opening).

3. Dig a groove of 1 2 cm (at intervals of 3 5 cm) on the horizontal wood.

4. Wrap the rope along the groove and put it on the river surface (both ends of the rope are on the river surface).

5. Put the same number of ropes (not wrapped) on the river surface (one end of the rope is on the river surface and the other end is in the hole).

6. The people on the river tied one end of the rope in 4 to xuanguan, and tied one end of rope in 5 to xuanguan.

7. At this time, the upper and lower mutual ropes are formed. (Note: xuanguan should be placed on top of the rope).

8. At the same time as pulling the rope, someone should rotate the crossbar to reduce the wear of the rope.

9. People on the river should control the angle between the rope and the horizontal plane so that Xuanguan is stable. (Note: A triangular base is needed underneath the hanging coffin to stabilize Xuanguan, and the base can be covered with wood and bamboo to reduce friction).

10. The hinch of the H-type structure (note: the winch, referred to as the winch table) should be added to the beam in the vertical and horizontal columns according to the weight of Xuanguan (professionally, it should be called a point column, referring to the southern coal mine cannon mining wood support). The cross column in the H-type winch table can be increased from top to bottom as needed (at the same time, press the middle to add the rope).

11, the solution of transportation when encountering a convex mountain, personnel can tie a rope (rope tied to the beam) from the hole to ensure safety and fall to the convex mountain with an H-shaped winch to dig and carve a horizontal column of 1 2cm and put it in the place where it will be rubbed (rolling timber method). 12. The H-shaped winch can change the form, for example, it can be changed into the shape of the seesaw, and the H-type remains unchanged), on the beam (the beam is fixed) Wear several pieces of wood and fix it (there are many ways to fix it, such as the cross column can be fixed on the ceiling if the cross column moves up, and several H-shaped winches can be installed on the longitudinal row as needed. ）

13. Personnel climb the hole, as long as the personnel bring a bundle of rope, after arriving at the hole, the rope is put on the river surface, pull a small wood, fix it as a beam, the rope is folded in half through the beam, and the two ends are thrown to the river surface, and the people on the river surface upload materials. But by that time, would there have been Kong Ming lanterns, kites, bows and arrows, or trained birds? If so, there is the possibility that the rope will pass from one side of the mountain to the other side, and people can enter any hole with security.

I watched an issue of "Discovery Journey", which tells the story of some Miao people living in Guizhou who have been guarding the entrance of a cave, saying that there are treasures inside. They are going to guard these treasures for generations to come. Later, the expedition team entered the cave and found a large number of hanging coffins at the exit at the other end of the cave.

After a series of visits by the expedition team, some of the elderly people in these villagers told some legends.

These legends roughly mean that the original residence of the Miao people was in the place where the sun rose in the east, and later they were forced to leave their place of residence because of the defeat of the war, but their ancestors have been rumored for generations to return to their original place of residence, and they also have to bring back the soul of the deceased, and the premise that the soul of the deceased can be brought back is that it cannot be buried or other burials, but can only be buried in hanging coffins. Their hanging coffin burial method is to first carry the deceased and the hanging coffin board one by one by the young, strong and good climbers in the village to the designated place, and then complete the assembly and burial of the coffin.

The deceased and the hanging coffin board are carried to the designated place by the young, strong and skilled climbers in the village, and then the coffin is assembled and buried.

Hanging coffin burial is an ancient form of funeral, the burial site is generally selected on the high cliff cliff facing the river, close to heaven, and avoid being destroyed, a masterpiece of genius.

Use a 60-meter to 80-meter Wangtian tree' to tie the coffin to the [top that is, the small end] and go into the water at the big end of the tree. With a thick rope, 7 people pull the small end at the top of the mountain, if the tree is not long enough for 80 meters, then use two or more roots to add to the "number of people at the top of the mountain" The roots can be attached with multiple strips of wood "The top of the mountain can be added to the people. . . The small end of the tree needs 2 to 3 people, because the top of the tree can hit the cliff wall and go up and down without effort, and there is support, it can stand up and down horizontally [just a thick rope to move up and down] Stand 30 to 80 degrees.

I solved the mystery of the hanging coffin, in a unique way, safe, convenient and practical. It can solve all the problems of placing the hanging coffin, but I can't contact it, who can help me, please,. Hurry, thank you.

Luobiao Town, Jue County, Yibin City, Sichuan Province, is about 350 kilometers away from Chengdu.