Help, everybody! Half of the graphics card s video memory? T T 80

It's okay to wash it, why do you wash it...

Humorous kids! Hehe.

It's broken, it's a new one.,It's a memory chip that's broken.,This will automatically expand.,If you don't change it in time, it may even be bad for the memory.,It's recommended that you hurry up and change the graphics card.。

The video memory directly affects the display effect and the speed of screen dragging.

It may be that you have short-circuited a part of the graphics card, try it with a brush, and if it really doesn't work, send it for repair.

One way to solve this problem is to replace the capacitor, which is basically recommended to use the capacitor with the same voltage and micronormal amount (slightly larger), and the probability of repair is larger.

Cleaning fluid? Everest Ultimate Edition take a look with this software.

It may be that the existing particles have been washed by you!

The graphics card is halfway hung. Or the line on the memory is broken.

The memory particles are empty welded, just take the graphics card to the maintenance place and drag the tin again

Repair is a solution, and video memory has a direct impact on 3D games.

I think it's more likely that the graphics card is hanging.

There is one less capacitor on the graphics card, it is recommended to repair the graphics card or replace it!!

Isn't it when you plug and wash, the board burns!

I don't think the problem with the graphics card should be big, you can try the graphics card on a different machine!

Uncle Lu is weird. Even the driver on the r128 will not shorten your memory.

How can it be? Will the memory of friends be reduced?

Compared to before, it has decreased?

You can look at the capacity of a single chip on the memory particle. Then divide by 8 and multiply by the number of memory chips. It's the real size of the physical memory.

You can also take a look after clearing the coms.

It may be that the existing part of your tnt2 is not working.

Because the existing ones are lumpy, there may be 2 pieces that are broken and unusable.

At that time, some of them were 4m each, and some were 8m each.

The driver is incorrect, try a different driver.

Maybe the memory chip is broken.

Are you sure the specs of the graphics card are: TNT 32M?

If so, you'd be wrong.

All I remember is that TNT's video memory was originally 16M; Only TNT2 is 32M

Go to BIOS, load default optimize setting

Or remove the drive and reinstall it.

It should be 128. It won't be 256.

The heat dissipation of the 128 is small, except for the fact that the game effect is almost good, nothing else has an effect, don't worry.

Do you think it's the kind of graphics card that can share memory?

Having 64M video memory means that this graphics card has 64M of physical video memory.

Hardware T&L support means that the graphics card has the ability to handle light sources and coordinate conversions independently of the hardware, that is, the core hardware supports DirectX7 or later. Hardware T&L technology can greatly reduce the load on the CPU. NVIDIA GeForce and AMD-ATI Radeon all series support hardware T&L technology, Intel's GMA 950 does not support this technology, fortunately, the current Intel CPU performance is very strong, even if the graphics card does not support this technology, if it is handed over to the CPU to deal with, the performance is not bad.

GMA X3000 is supported.

At present, with the continuous development and improvement of DirectX, the advantages of OpenGL are gradually lost, although there is a version advocated by 3DLlabs to come out, which has added a lot of designs similar to the programmable unit in DirectX, but the awareness of users of the manufacturer is not high, and the future development prospects of OpenGL are confused.

This graphics card of yours only holds that and that technology (sorry, forgot the name), and can "semi-dynamically allocate memory". That is, memory can be allocated as video memory in a fixed way, and the video memory value can be adjusted by itself.

Go to the BIOS and set it up. Power on, press delete .........No more nonsense. Hehe.

BIOS settings to see if there is any problem.

Cress 7300gs

256M memory capacity.

DDR2 memory type.

Your graphics card is 256M, but the performance is not as fast as the 7300GT 128M graphics card.

Because it is DDR2 video memory, although it is only 128M, but with DDR3 video memory, the performance is much faster than yours.

128 and 64 are the bit widths of the graphics card, just like the width of the road at high speed kilometers The larger the number, the larger the data you will display at the same time (and the greater the bandwidth) You can look at the parameters of your graphics card in the next GPU-Z My 8500GT uses video memory So the bandwidth reaches 30G s Your estimate is only about 5G This is the difference between graphics cards.

For games, one is to look at the graphics card memory type, and the other is to look at the bit width! The third is to look at the number of SP units (formerly called the render pipeline).

In BISO Setup, you can set 16,32 or memory models in Advanced Chipset Features (3rd item) - AGP & P2P Bridge Control (2nd item) - VGA Share Memory Size (2nd item), if you set the video memory to 64M, it will be very slow.

It depends on what you do with the computer.,If it's just general Internet and games,512M is completely enough,If you want to play mainstream games,Especially those big guys or you use to do professional**Image design,,1G of video memory is not too much,Naturally, the more the merrier,Hehe。

At present, it is all to 1G video memory, it still depends on what you do with the computer, and to what extent you need to go. It doesn't have to be high.

Graphics card512M memory is OK The main thing is to look at the bit width and SP number.

This depends on the others, the width of the video memory, and the process of the graphics card.