How to flash the Apple 6 with Aisi Assistant?

Preparation before flashing the iPhone6:

Before flashing, please back up the important data in the iphone6 phone, mainly contacts, text messages and some APP applications (of course, these are also re-updated later), backup data I believe everyone understands, including Aisi assistant also has a backup function;

If you remember the ID password, if you have forgotten it, you can retrieve it first, and then flash the phone;

It is best not to use an extension cable to connect your iphone 6 to the data cable of the computer. During the flashing process, please do not operate the iPhone6, let alone disconnect it from the computer, otherwise it will cause the flashing failure, white apples or bricks and other faults.

Please choose the iOS system version that suits your model, in addition, for friends who need to jailbreak, please pay attention to the iOS version of the flash.

Aisi Assistant iphone6 flashing method steps:

1.First of all, install the new version of AIS Assistant in the computer**, after completion, connect the iPhone6 to the computer through the data cable, then open the AISI Assistant, and then open the "**Resources"-"Firmware**" area to select the model model and the iOS firmware version that needs to be flashed, here to flash the latest iOS

For example, the system is the method of flashing the iphone6.

Step 1. 2.**After the iOS firmware, click "One-click Flash" in the "AISI Toolbox" in the lower left corner, and then click "Select Firmware" on the right side to select the good firmware just now, AISI Assistant iPhone6 flashing method.

Step two. Note: When flashing, please check "Keep user data to flash the computer", which can automatically let AISI Assistant backup and restore data.

3.Next, click "Flash Now", at this time, enter DFU mode according to the prompts, DFU mode needs to be manually operated on the mobile phone to enter, follow the prompted method to operate, Aisi assistant iphone6 flashing method.

Step 3. After entering DFU mode, the flashing will start automatically, at this time we don't need to operate the computer and mobile phone, just wait for it to be completed automatically, Aisi assistant iphone6 flashing method.

Step 4. Note: In the process of automatic flashing, do not operate the computer and mobile phone, let alone unplug the data cable, otherwise it will lead to serious flashing failure.

5.Finally, wait until the flashing is automatically completed, and the Aisi assistant iphone6 flashing method.

Step five. Once the flashing is complete, tap "Activate Now" to quickly activate your phone.

AISI assistant iphone6 flashed successfully.

The above is the Aisi assistant iphone6 flashing tutorial, compared with using iTunes tools to flash the machine, it is more convenient, especially the firmware can be carried out directly in the tool, which is more suitable for white friends.

1.First of all, install the new version of AIS Assistant in the computer**, after completion, connect the iPhone6 to the computer through the data cable, then open the AISI Assistant, and then open the "**Resources"-"Firmware**" area to select the model model and the iOS firmware version that needs to be flashed, here to flash the latest iOS system as an example.

When it comes to the software of Aisi Assistant, I believe that it must be familiar to those who often use iphones and iPhones every day. It is a very comprehensive Apple mobile phone assistant, which can not only back up Apple device data, manage the **, **, etc., but also can be used to flash Apple devices, jailbreak, is a simple and easy-to-use software.

So how to use AISI Assistant to flash iphone? I will give you a detailed introduction below, I hope it can be helpful to you.

The first step is to find the AISI assistant software on the computer and click to open, after entering the main interface of the software, find the [Flash Jailbreak] function at the top of the interface, and then in the interface below it, find the [Professional Flash] option, and then click the [Query SHSH] option on the right side of the interface.

The second step is to click on it and follow the prompts to enter the DFU mode. The way to enter DFU mode is to press the home button of the device first and do not release it, and then press the power button of the device and do not release it until the screen goes out and then release the power button of the device after about four seconds, but do not release the home button until the software prompts the word "success", and then release it.

Step 3: After entering DFU mode, the software will automatically query which SHH you have, and will also show you which versions your device can flash to.

Step 4: After knowing which versions your device can be flashed, find the corresponding firmware that needs to be in the [Firmware**] of the AISI Assistant software, and then click Go**. The progress of the firmware and the location where it is saved can be viewed in the [Center].

Step 6, after the firmware is selected, click the [Flash Now] option, if it is not DFU mode, you also need to enter DFU mode, after entering DFU mode, the flashing machine will automatically start.

Seventh, it takes a certain amount of time to flash the machine, at this time we just need to wait patiently.

Step 8: After the iPhone is flashed, wait for the phone to turn on, and then click [Activate Now]. In this way, the flashing of the Aisi assistant is completed.

If you also want to learn this skill, then you might as well follow this article to learn this skill, so that in the future use of the mobile phone, we have mastered a skill that cannot be underestimated.