The content of the automobile inspector, how to take the qualification certificate of the automobile

The work content includes:

1. Responsible for supervising and inspecting the operating procedures and maintenance standards implemented by maintenance personnel in the process of temporary repair and maintenance.

2. Responsible for supervising and inspecting the inspection work of maintenance personnel.

3. Responsible for the technical inspection of the key parts of the vehicle frame and after getting off the car.

4. Responsible for the vehicle after the erection, maintenance, decompilation and replacement of major components in the warehouse test.

5. Responsible for the pre-acceptance of erection and repair, factory repair vehicles and major components.

6. Responsible for confirming the spare parts that need to be replaced during the maintenance process.

7. Responsible for the pre-acceptance of the new car.

8. Cooperate with technical personnel to carry out pre-warehousing acceptance of major components purchased.

9. At any time (including outside working hours), major faults and hidden dangers of the vehicle should be notified in time.

Abstract]:The Ministry of Communications has compiled the "Job Training for Automobile Maintenance Quality Inspectors" (hereinafter referred to as the "Training Materials") which is a job training material to meet the needs of the development of automobile maintenance and testing technology. The author puts forward several suggestions on the practical problems encountered in the actual preaching of metal materials science involved in the basic knowledge of automobile maintenance quality inspection in the training textbook, which are only for reference in the future publicity and implementation.

1 The importance of publicizing the common sense of metal materials Metal materials are used by modern industrial, agricultural, national defense and science and technology departments.

1. The content of the basic knowledge assessment:

Select the content related to the category from the knowledge of mechanics, metallurgy and heat treatment, metal technology, materials, welding, non-destructive testing, electrical, automatic control, production process, etc.

2. The content of professional knowledge assessment:

(1) Comprehensive knowledge

relevant regulations, procedures and standards;

Professional knowledge (e.g. boilers, pressure vessels, gas cylinders, pressure pipes, medical oxygen chambers, cranes, elevators, in-plant motor vehicles, aerial ropeways, amusement machines and amusement rides, explosion-proof electrical, etc.);

Non-destructive testing methods and related knowledge.

(2) Regular inspection knowledge

Regular inspection of relevant rules and methods;

Preparation of inspection process and plan;

Defect assessment and treatment measures;

Accident prevention and emergency measures.

(3) Knowledge of supervision and inspection

related equipment manufacturing processes and processes;

rules and methods related to supervision and inspection;

quality assurance system;

Judgment and handling of relevant issues in supervision and inspection work.

Inspectors are divided into inspectors, inspectors and senior inspectors.

Inspectors include: boiler inspectors, pressure vessel inspectors, pressure pipeline inspectors, medical oxygen chamber inspectors, gas cylinder inspectors, crane inspectors, elevator inspectors, in-plant motor vehicle inspectors, aerial ropeway inspectors, amusement machine and tour east facility inspectors, explosion-proof electrical inspectors.

The inspector declares the assessment of the inspector's inspection qualification, including the assessment of basic knowledge, professional knowledge and practical skills.

1) The basic knowledge and professional knowledge assessment of inspectors (including comprehensive, fixed inspection, and supervision and inspection knowledge) are scored on a 100-point system, and the score reaches 70 points.

Code of Practice for Inspectors:

1) Love their own work, study professional knowledge and inspection technology, and have the technical level suitable for the inspection work undertaken;

2) Be familiar with and implement relevant national regulations, standards and technical conditions to ensure the quality of inspection work;

3) Be diligent in practice, be proficient in the use of common testing tools and instruments, and continuously improve the level of inspection;

4) Adhere to principles, test according to law, have a decent style, and be diligent and honest.

The qualification certificate of automobile maintenance quality inspector is issued by the examination of the first maintenance management department. The conditions are: have a driver's license, have an intermediate or above car maintenance certificate, have a certain number of years in the job, and be recommended by your car maintenance unit.

Basic knowledge of laws and regulations and practical knowledge of the post. There are three subjects in the quality inspector examination, which are: "Building Decoration Quality and Safety Management", "Building Decoration Engineering Construction Organization Design and Progress Management", and "Building Structure".

First of all, you should make sure that you meet the conditions for applying for the certificate: 1. Be at least 18 years old; 2. High school degree or above.

Those who meet the application requirements should contact an authorized institution, and the institution will organize the application, training, evidence collection and other related work by itself. Generally, you can search for training institutions on the Internet, check the qualifications, and decide to sign up for the business license.

The materials to be prepared for registration are: 1 copy of ID card (front and back); 1 photocopy of academic certificate; 2 1-inch color ID photos; Completed registration form.

Application conditions for automobile inspector qualification certificate:

1. Be at least 18 years old;

2. High school degree or above.

Those who abide by national laws and regulations, abide by professional ethics, and have the above conditions can apply to participate in quality inspector training and examinations and obtain quality inspector certificates.

Personnel participating in the quality professional qualification examination must abide by the Constitution of the People's Republic of China and various laws, conscientiously implement the guidelines and policies of the national quality work, abide by the laws and regulations related to quality work, love quality professional work, and abide by professional ethics.

Quality Inspector Job Responsibilities.

1.Assist department leaders to formulate the annual quality plan of the enterprise and be responsible for the specific implementation;

3.Complete product-related inspections;

4.Issue an inspection report according to the inspection results and submit it to the relevant departments;

5.Deal with the quality of customer feedback;

6.Responsible for the custody of various testing data;

7.Do a good job in the storage and maintenance of common quality inspection and experimental equipment.

Competencies that a quality inspector should have.

1.Have the knowledge and ability of professional quality inspection, and be familiar with the production process, quality inspection standards and methods of enterprise products;

2.Have good analysis and judgment ability, and be able to find out quality problems according to product quality inspection results;

3.Good communication and coordination skills;

4.Work conscientiously and responsibly, and have team spirit.

Quality Inspector Career Development.

Professionally responsible for the performance appraisal of vehicle braking system, steering system, driving system, lighting system, vehicle speed appraisal, vehicle type definition, accident trace inspection and identification, etc., and issue vehicle inspection reports.

Automobile inspection certificate is generally registered online, and then take the exam after passing the audit: 1. The labor bureau of quality inspectors has, but it seems to be food, and there is no professional qualification certificate for ordinary quality inspection; 2. The State Personnel Bureau has a national quality professional and technical qualification certificate. Therefore, you can consult the local labor bureau and personnel bureau to see which certificate is more appropriate; 3. The qualification certificate of automobile maintenance quality inspector is issued by the first maintenance management department.

Summary. Kiss! Hello!

We're happy to answer for you! The requirements for automobile inspectors are as follows: technical secondary school degree or above, holding a quality inspector qualification certificate; Possess relevant professional knowledge or have substantial practical work experience; Proficient in operating all kinds of commonly used inspection measuring tools and inspection equipment; Understand the national installation engineering quality inspection and evaluation standards and construction acceptance specifications.

The job responsibilities of the automobile inspector are: 1. Responsible for professional inspection, and keep abreast of the quality of sub-projects in each operation area; 2. Responsible for the assessment of the quality of the sub-project, establish the quality file, and regularly report the quality to the project chief engineer and the superior quality management department; 3. Responsible for the image data recording of the construction process and construction quality of each process of the sub-project and the concealed project.

Kiss! Hello! We're happy to answer for you!

The requirements for automobile inspectors are as follows: technical secondary school degree or above, holding a quality inspector qualification certificate; Possess relevant professional knowledge or have substantial practical work experience; Proficient in operating all kinds of commonly used inspection measuring tools and inspection equipment; Understand the national quality inspection and evaluation standards and construction acceptance specifications for installation disturbance projects. The duties of the automobile inspector are:

1. Responsible for professional inspection, and keep abreast of the quality of the sub-bucket belt in each operation area; 2. Responsible for the assessment of the quality of the sub-project, establish the quality file, and regularly report the quality to the project chief engineer and the superior quality management department; 3. Responsible for the image data recording of the construction process and construction quality of each process of the sub-project and the concealed project.

Responsibilities and responsibilities of automobile inspectors: 1. Familiar with the company's relevant quality inspection regulations and requirements. 2. Master the construction content and technical standards of each repair project.

3. According to the inspection of the construction process and the inspection of the completed vehicle, after the closure of the suspected hole and crack, it is responsible for signing the "quality inspection qualified". 4. Carefully inspect the quality of the completed vehicle, including a comprehensive inspection of the engine, chassis, cold electricity, sand board, and painting. 5. Before the inspection, you must read the work card in detail, and pass the warranty items one by one, and inquire to the receptionist and repairman if you are not clear.

6. Each inspection must have a detailed record. 7. For the problems of non-warranty items and the matters that should be paid attention to when driving, they should be noted on the quality inspection report form as much as possible, so that the payment receiver can explain clearly to the customer when handing over the car and improve the quality of service. 8. The quality inspector summarizes the monthly quality inspection, the reason for the fibrillation or repair, and reports to the after-sales service manager in the form of a report.

Requirements for automobile inspectors: 1. Experience in the automotive industry is the basic condition 2. Experience in automobile inspection is preferred 3. Hard-working.

The specific contents of automobile testing are: automobile safety testing: braking, leakage, side skidding, vehicle speed and lighting, etc.; Working Reliability Testing:

Abnormal noise, wear, deformation and crack detection; Dynamic detection: acceleration ability, chassisOutput power, engine power, circuit performance testing; Environmental protection testing: Detection of noise and exhaust emissions.

The comprehensive inspection of the vehicle is a supplementary inspection of vehicle safety in order to ensure the safe and reliable operation of the vehicle on the basis of the regular annual inspection of the vehicle, including tire pressure and brake pads.

All-round detection of brake fluid and other echo details to ensure the safety of every trip of the car. Rubber chains.

The main tasks he is engaged in include:

1) Use instruments and equipment to detect the whole vehicle and parts, and determine its performance indicators;

2) Inspect the body, frame, drive train, brake system, steering system, dynamic balance, tires, etc. of the motor vehicle;

3) Check the performance of the engine;

4) inspect the gearbox;

5) Inspect carburetors, oil tanks, oil pipes, oil jujube pumps, etc.;

6) Check the electrical systems such as spark plugs, distributors, generators, starters, instrument panels, tape recorders, and lights;

7) Inspect clutches, radiators, mufflers, shock absorbers, safety equipment, etc.;

8) Jing Yanqin inspects the exhaust emissions of automobiles and motorcycles;

9) Record, calculate, and judge inspection data;

10) Assist the chief inspector to complete the inspection report;

11) Inspect and maintain instruments and equipment;

12) Responsible for the hygiene and safety of the laboratory.

The following types of work are classified as occupations:

Spark plug finished product inspector, electric locomotive mechanical assembly inspector, electric locomotive electrical assembly inspector, automobile maintenance inspector, automobile inspector, motorcycle inspector, motorcycle engine inspector, motorcycle carburetor inspector, automobile performance tester, engine tester, transmission tester, automotive electrical tester, engine inspector, transmission inspector, automotive electrical inspector.

As follows:

1. Overview: 1. Formulate a management implementation plan according to the company's strategic planning, be responsible for the promotion of the ISO9000 quality management system, determine the company's quality policy, and achieve the quality objectives.

2. Combined with the actual product quality standards of the company's quality management, formulate inspection specifications for raw materials, outsourcing parts, process products and finished products, and clarify inspection methods, inspection procedures and defective product handling matters.

3. Grasp the key points of quality control, formulate key and special process operation standards and assist relevant departments to implement them.

4. Strengthen internal and external coordination and communication, be responsible for the collection, summary and analysis of customer satisfaction information, and take measures to improve and improve the quality work.

5. Comply with the company's instructions, properly handle customer complaints, and strive to be fair and objective.

6. Timely process products to achieve quality work in each process.

7. Take the lead in organizing relevant departments to investigate and analyze quality accidents, put forward disposal suggestions, and prevent the recurrence of similar accidents.

8. Ensure that the company's quality can meet the needs of customers.

9. Assist in the cooperation of relevant departments.

2. IQC:

1. Responsible for the incoming inspection of all raw materials of the company.

2. Responsible for the incoming inspection of outsourced parts processed outside the company.

3. Properly dispose of defective products and scrapped products.

4. Put forward suggestions and suggestions for improvement of inspection methods and standards for raw materials and outsourcing parts.

5. Quality inventory of stored raw materials and outsourced parts.

6. Fill in the corresponding records and report to the relevant departments.

3. PQC:

2. Control, inspection and supervision of the quality of key and special processes.

3. Properly dispose of the defective products of the process products.

4. Put forward suggestions or suggestions for improvement of the quality inspection methods and standards of the process products.

5. Quality inventory of products in the storage process.

6. Fill in the corresponding records and report to the corresponding departments.

Fourth, OQC:

1. Responsible for the factory inspection of the company's products.

2. Put forward suggestions or suggestions for improvement of finished product quality inspection methods and standards.

3. Properly deal with the abnormal quality of the finished product.

4. Quality inventory of stored finished products.

5. Fill in the corresponding records and report to the corresponding departments.

5. QE:

1. Quality planning.

2. Product quality analysis.

3. Corrective measures, etc.

4. Assist the company in its work.

5. Deal with quality accidents.

6. Handling of customer complaints.