How to manage 2 network cables? How to divide one network cable into two parts?

Hello! This is a matter of principle.

The landlord seems to have made a mistake.

The original intention of the landlord should be a computer with dual network cards to do traffic load balancing. (so that the overall network speed is better than the network speed when a line is connected) But there is one thing misunderstood here, namely:

It is not feasible to simply add two network cards to the device and connect two network cables to achieve network load balancing.

Because there is only one set of network protocols that can be supported at the same time in a computer, it is not possible to achieve this effect if you do not configure the binding protocol here. (I don't know if you have found that although there are two network cards, the network traffic is still almost all on one network card).

In order to realize the multi-NIC load balancing protocol, it is necessary to configure the dual network cards, as for the specific configuration, you can use the tool software, search on the Internet, there should be a lot. (You can also use the server that comes with Windows.) ）

Supplement] If you do not understand the expertise and data** principle, then it is not advisable to make such attempts. Otherwise, the mistake is small, and the loss is big. If you really want to try it, it is advisable to search for some tutorials on the Internet to get a first understanding of it, and then consider asking some professionals to help and learn from it. Above.

Network load balancing is achieved only when two network cables are connected to two routers. If 2 is better or 1 is good, or 1 is better, please choose a high-grade network card.

Two network cables are useless at all, just one in use.

Only one router or switch is needed to divide a network cable into two uses, and the difference between home routers and switches is not long, and routers are better than switches, so it is recommended to use routers here. You only need to dial up the Internet through the routing after passing through the modem, and then connect the two computers to the router and LAN port respectively.

There are 8 small network cables in the network cable, which are white orange, orange, white green, blue, white blue, green, white brown, brown, of which only white orange (1), orange (2), white green (3), green (6) play the role of surfing the Internet, that is, four lines. So as long as you connect these four wires, you can go online.

You can insert the white orange (1), orange (2), white and green (3), and green (6) wires at both ends of the network cable into the mouth of the crystal head respectively, and make the crystal head. This is a network cable.

Then the two ends of the network cable are left with blue, white blue, white brown, brown these four lines, no need to consider the color, the same we also put these four lines into the mouth of the crystal head, do a good job of the crystal head. This is a network cable.

After this is done, a network cable has four crystal heads, and it becomes 2 network cables.

A network cable can be divided into two, and there are also two connectors, but it can't be connected to many extensions like ** lines, if you want to connect an extension, you need to use a switch.

The premise of one point and two is that there is a switch, 8 wires in a network cable, and 4 are a group with crystal heads. Connect the two ports of the switch and the two computers respectively.

Depending on what you want to do, I can help you figure out how to do it.

Buy a wireless router. Connect the WAN interface of the router to the cat, according to you.

We manage the way we configure the router. Use a twisted pair cable to connect to your neighbor's house (no more than 100 meters) and you can use wired or wireless internet access yourself. If you need to limit the traffic of each house, you can set it in the router.

Add a router and set it up according to the router instructions, it's very simple! A good wireless router is only about 100 yuan, and the wired one is cheap!

Spend a few dozen dollars to buy a router directly, and you will get everything. If you don't know about it, ask again.

You can use a router, you can pull out two network cables from the router, connect them to your own computer, and set the IP addresses of the two of you to the same network segment.

Add a router, and the networks of both companies are connected to this router, and the two can access the Internet together.

8-core network cable, orange and green can be used as a group.

blue and brown as a group; Ensure that both ends are 1236 corresponding to the line sequence.

568B network cable connection.

4 cores - 100 Gigabit network cable connection, corresponding to both ends.

Required items: 1 working router, 2 network cables.

1. Connect the two network cables to the computer at one end and the router port 1234 at the other end, and be careful not to connect them to the WAN port.

2. Then set the IP addresses of the two computers to "and" respectively, and be careful not to conflict with the default address of the router. A small LAN can then be formed.

That's too general, and you didn't say a few hosts. Actually, computers now. Two hosts can be used for LAN with a network cable.

Now the port is fool-identified. Connect the two computers directly with a network cable, and then both computers open the network connection, local connection, attributes, IPv4 or IPv6 to set the IP in a network segment, for example, one is the other is the first three, the same as the back. All in the same network segment.

This allows two computers to play LAN games.

It means that two routers are used to form a local area network.

To prepare two routers, four computers do not need switches, and the ports are sufficient.

Then the network cable. Finally, use a network cable to connect the two LAN ports of the router, then shut down the DHCP servers of the two routers, and modify the LAN port IP of the router, which cannot be the same, but must be in the same section.

Then set the IP of each machine, and the gateway connected to the telecom is set to the IP of the router that dials the signal. The IP of the router that is connected to the network is set to dial the netcom number. This makes interoperability available.

Just buy a router, connect the network cable that connects your computer to the router, then set up the router, and finally connect your computer and the neighbor's computer to the router with the network cable.

Wireless routers if not far away recommend this.

If the line of I'll tell you how to connect.

The broadband cable is connected to the cat, and then a separate line connects the cat and the router, and the last two days are connected to the router and the computer (network card) host respectively.

You pick up a router from the cat, and then you split out the two wires and set it up to share the Internet.

Buy a SOHO broadband router.

SOHO Broadband Router buys more than 100 meters of network cable, overhead or hidden link 2 places.

There are 2 lines for broadband plugging, one for him, that is, for more than 100 meters, you can use the route settings.

It is recommended to use a router.

1. ADSL modem comes out to connect to the WAN end of the router (router) (generally there is only one port for household use);

2. The LAN end of the router (generally used by 4 ports at home) is connected to the computer;

3. Set the WAN port connection type of Router to PPPoE, and then enter the account number and password.

Add a router and you can do it, and it's not just 2.