When changing the soil, do you want to remove the small roots of the bowl lotus?

If the water quality is turbid after the bowl lotus germinates, it needs to be replaced, if the water quality is clear, it is not necessary to replace it, before the replacement needs to be placed in the sun for about 2 days, after the replacement is completed, a few drops of nutrient solution need to be added to supplement nutrients for the plant, and promote the better growth of the bowl lotus.

Bowl lotus in the breeding process has a lot of skills, so bowl lotus germination after the need to change the water, bowl lotus germination needs to be decided according to the water quality of the situation, if the water quality is relatively clear, you do not need to replace the water quality, if the water quality is turbid, you need to change the water quality.

When using tap water to replace it, it can be placed in the sun to dry, and wait for about 2 days to use, so as to remove bacterial substances in the water quality, reduce the generation of pests and diseases, and promote the growth of bowl lotus.

Bowl lotus is a light-loving plant, so it can be placed in a astigmatism environment during daily breeding, give bowl lotus enough light time, in order to promote the growth of bowl lotus, the daily light time can be maintained for 6 hours, so that it can also make bowl lotus bloom more vigorous.

After the bowl lotus germinates, you can add a few drops of nutrient solution in the clear water to supplement nutrients for the plant liquid, which can promote the growth of the bowl lotus, and the daily replacement of water quality can be controlled at about 20 days, and the bacteria breed relatively quickly in summer, and can be replaced every 10 days or so.

Soil: The pH value of the soil for planting lotus should be controlled within 6-8. It is best to use river pond mud or rice field soil for potting soil, and you can also use garden soil for vegetable fields.

Lotus is not tolerant to fertilizer, so the base fertilizer should be less, and the more fertile river pond mud and pastoral soil do not need to be on the base fertilizer, so as not to burn the seedlings, which should be paid special attention to.

Other conditions that need to be met to grow bowl lilies:

Cultivation containers: glaze pots, porcelain pots, and purple sand pots are ideal pots for lotuses, but such pots generally have bottom holes, so they should be blocked with cement yellow sand. For the caliber of the flower pot, the bowl lotus should be 20 cm high and about 20 cm in diameter.

In short, the pot is larger, and the flowering is both abundant and good.

Site: Lotus is a strong positive plant, which should be placed in a place that can receive 6-8 hours of light every day, so as to promote its flower buds to bloom more and more.

Temperature: Lotus is a temperature-loving plant, generally 8-10 begins to sprout, 14 Lotus whip begins to elongate. The temperature should be above 13 when planting.

Otherwise, the seedlings grow slowly or cause rot. From 18 to 21 o'clock, the lotus flower begins to produce erect leaves, and it takes more than 22 to flower. The lotus flower is very resistant to high temperatures, and it is not a big problem to be above 40.

Dear, if you only use water, you can germinate as long as the temperature is enough, but it is impossible to make it bloom. Lotus likes fat and light, if the fertilizer is not enough, it may not grow well, it is best to put it in the soil, it will grow quickly. Personal experience

Without this need, the water quality should be kept stable and clean. As long as it does not deteriorate and stink, there is no need to change the water, and if there is a problem with the water quality, it should be replaced by one-third immediately, not all at once, after normal growth, liquid fertilizer can be applied once a month.

1. Growth habits:

1) Likes full sun, not tolerant of shade. It likes heat, and the suitable temperature for growth is 20 30, and the growth is stagnant when the temperature is lower than 15. Likes moisture and is afraid of dryness, and likes relatively stable still water. Fertile clay soils rich in organic matter are preferred. The appropriate pH value is:

2) The hot summer of bowl lotus is its peak growth period. 8 -10 budding, 14 lotus root whip begins to elongate, 23 -30 is the temperature of growth and development, 28 or more flowering, 35 or more slow growth, 40 stop growing, or even die. Avoid heavy winds after rain or strong winds.

At 25 o'clock, a new lotus root grows.

2. Prevent bowl lotus rot disease.

Disease-resistant varieties are selected according to local conditions.

Seriously ill fields should be rotated for 2 to 3 years.

Select disease-free lotus roots, and use 800 times of 50% carbendazim or thiophanate-methyl wettable powder and 800 times of 75% chlorothalonil wettable powder, spray and simmer, cover plastic film and seal for 24h, dry and plant.

The lotus root field was deeply ploughed and raked, and 1500 2250kg of lime per hectare was applied.

Strengthen fertilizer and water management, apply enough decomposed organic fertilizer, timely and appropriate top dressing, and achieve the combination of organic fertilizer and chemical fertilizer, nitrogen fertilizer and phosphorus and potassium fertilizer; According to the different growth stages of lotus root, it is necessary to manage the water layer well, so that the depth is appropriate, and the temperature and fertilizer are adjusted with water to prevent the aggravation of the disease due to high water temperature or long-term deep irrigation.

After the diseased plants were removed in time, spray 600 times of 50% carbendazim wettable powder and 600 times of 75% chlorothalonil wettable powder; It can also be mixed with 375 450kg of fine soil per hectare, after 3 4 hours of stuffing, sprinkle into the shallow water layer, and after 2 3 days, spray on the above-ground petiole with 600 times of the mixture or 40% polysulfur suspension 400 times or 50% Suklin wettable powder 1000 times. [10]

After the germination of bowl lotus seeds, it is necessary to transplant them quickly to reach this standard, and the effect is not good if it is late.

Change it once a day and keep it warm.

The method of replacing the water of the bowl lotus into the soil can be replaced by filling water, putting clean water in it, and when the water begins to overflow, the dirty water will gradually be replaced with clean water. You can also suck out the dirty water and pour it in clean water. Every time you change the water, you can add some nutrient solution to the water, which will help the bowl lotus grow.

1. Water injection replacement

Bowl lotus is an aquatic plant, its growth needs sufficient water, the breeding process needs to ensure that the water quality is clean, after entering the soil for its water change can take the method of water injection and replacement, put the water pipe in the pot, and then put clean water into it, and wait until the water begins to overflow, the water quality will gradually become relatively clean.

2. Water absorption replacement

We need to use a water absorption tool to suck out the dirty water in the pot, and then slowly pour clean water along the edge of the pot, so that the water change is completed.

3. Precautions

Breeding bowl lotus needs to change the water regularly, we can use rainwater in nature, snow water, etc., you can also use pure water, if you want to use tap water, it is best to stand for two days and wait for the chlorine to volatilize before use, each time you change the water, you can also add some nutrient solution to the water, which helps the bowl lotus to grow.

<> when changing the water of the bowl lotus after entering the soil, you can consider using the method of water injection and replacement. Put the water pipe or small faucet into the basin and ask the empty water to add clean water to force the dirty water to overflow. By absorbing water, the old water in the basin is sucked out first, and then the new water is poured in.

However, it is not recommended to change the water after the bowl lotus is put into the soil, which will affect the growth of the roots.

1. Water injection replacement

After the bowl lotus is potted in the soil, it is found that the water quality has become relatively turbid due to improper operation, and for novice farmers, it can be replaced by water injection to replace the water in the bowl lotus pot. Put a water pipe or small faucet in the basin and pour clean water into it, and the dirty water will overflow naturally.

2. Water absorption replacement

Usually we will replace the clean water quality by pouring water, but this balance is not easy to make the plants lodging, so it is recommended to use a water absorption tool to suck out the internal dirty water, and then pour in clean water to replace it. Or use a container for scooping water, scoop out the dirty water from the balance, and then pour in the water, and the effect of changing the water is similar.

3. Precautions

Although it is possible to change the water after the bowl lotus is put into the soil, it is not recommended to change the water for the bowl lotus that has just entered the soil. Because the water change operation is more likely to affect the growth of the root system of the plant, the development rate is slowed down. Usually, only the water that has evaporated naturally from the environment is sufficient.

1. Soil selection: When transplanting, it is necessary to prepare a piece of fertile soil, pour 500 ml of water into 1 kg of soil, and add appropriate diluted organic fertilizer to the soil, and prepare the fertile silt soil with a wide open chain; Burying a few pieces of gravel at the bottom of the silt can stabilize the root system of the bowl lotus.

2. Prune the bowl lotus: on the way to transplant the bowl lotus, dig out the bowl lotus from the old soil, and then use tools to prune off the aging root system of the bowl lotus, only retain the healthy and thick root system of the bowl lotus, and apply an appropriate carbendazim solution on the root system, which can effectively prevent the growth of bacteria in the roots.

3. Transplanting method: bury the treated bowl lotus in the soil, Shu the root system of the bowl lotus, and then cover the silt on the root system, and pour water into the container, the water level height can not exceed the bowl lotus leaves, because the root system of the newly transplanted bowl lotus is still very weak, and the leaves of the bowl lotus are needed to breathe.

4. Replace the water quality: The root system of the newly transplanted bowl lotus will emit a large amount of carbon dioxide, resulting in turbid water quality, so after transplanting for a week, the water quality needs to be replaced immediately; If you choose tap water, you need to precipitate for 2 days before using it, and drop diluted water-soluble fertilizer into the water, so that the bowl lotus can quickly adapt to the new environment.