How to flash the little pepper phone, how to flash the little pepper android phone can t turn on

Flashing Tutorial] introduces two methods.

1) One-click flashing.

Use flashing software to flash your phone with one click, such as flashing assistant, which is very simple, pay attention to backup.

2) Card swiping. Brush in according to the regular card swiping process, pay attention to brush the third-party REC, and double clear before flashing into the bag, battery power, and available memory!

The swiping steps are as follows:

Step 1: Import third-party recovery (if you want to flash third-party ROM, third-party recovery is indispensable; If you have already flashed the third-party recovery before, you don't need to flash it again).

Step 2: Swipe the third-party ROM package (card swiping).

2.Enter Recovery mode.

In the shutdown state, press and hold the volume up + power on button to turn on, and press and hold the two buttons until you enter recovery;

In the boot state, select "Restart", press and hold the volume button to enter recovery mode;

3.Wipe Data Factory Reset (Wipe out all data) (the volume button controls up and down, and the power button is OK, the same below).

4. yes

5.Wipe cache partition

6. yes

7.Install Zip from SDCARD

8.Choose Zip from SDCARD

9.Find the installation package and open it.

10 Finally, choose to restart the phone, congratulations on the successful flashing! (It takes about 2-3 minutes to turn on the device for the first time, please be patient).

The tutorial of the little pepper Android smart machine flashing machine is as follows:(No need to boot up) 4、After the unpacking is completed, the line brush treasure will automatically jump to the flash port detection page,Click Click on the flash port detection page Click to install the flash driver。

5. Select Fully Automatic Installation Driver in the pop-up prompt box, and then follow the prompts to install it step by step.

6. After the driver is installed, it will automatically enter the flashing mode, wait for a few minutes, and the flashing of the little pepper Android smart machine will be completed automatically.

Since the network supported by the mobile phone is determined by the hardware, it is not possible to crack the software or upgrade the software system to make the mobile phone support the network of other operators.

If you can't turn on the machine, you can light it up, you can brush it if you can light it up, and you can repair the phone first if it doesn't light up.

You can turn off the brush. Which model.

There is a brick-saving post in the Beidou Little Pepper Bar, take a look.

Go to the official website to see if there is a strong brush bag. Strong brush!